ConvConvenience closing (closing tenience closing (closing the vhe vehicle frehicle from out-om out-
side)side)
&
W
WARNINGARNING Risk of entrapment due to not
paying attention during convenience clos-
ing
When the convenience closing feature is oper-
ating, parts of the body could become trapped
in the closing area of the side window and the
sliding sunroof.
#
When the convenience closing feature is
operating, monitor the entire closing
process and make sure that no body
parts are in the closing area.
RReqequiruirements:ements:
R
The SmartKey is in the immediate vicinity of
the vehicle.
#
Press and hold the ß button on the Smart-
Key.
The following functions are performed:
R
The vehicle is locked.
R
The side windows are closed.
R
The panoramic sliding roof is closed.
#
TTo into interrerrupupt convt convenience closing:enience closing: release the
ß button.
#
TTo continue convo continue convenience closing:enience closing: press and
hold the ß button again.
%
Convenience closing also functions with KEY-
LESS-GO (/ page 70).
RResolesolving prving problems witoblems with th the side windowshe side windows
&
W
WARNINGARNING Risk of becoming trapped or
fatally injured if reversing protection is not
activated
If you close a side window again immediately
aer it has been blocked, the side window will
close with increased or maximum force. The
reversing function is then not active and body
parts may become trapped.
#
Make sure that no parts of the body are
in the closing area.
#
To stop the closing process, release the
button or press the button again to
reopen the side window.
A side windoA side window cannow cannot be closed and yt be closed and you cannotou cannot
see tsee the cause.he cause.
#
Check to see whether any objects are in the
window guide.
#
Adjust the side windows.
A
Adjusdjusting tting the side windowhe side windowss
If a side window is obstructed during closing and
reopens again immediately:
#
Immediately aer this, pull and hold the corre-
sponding button again until the side window
has closed and hold the button for at least one
more second (re-adjustment).
The side window will be closed without the
automatic reversing function.
If the side window is obstructed again and
reopens again immediately:
#
Immediately aer this, pull and hold the corre-
sponding button again until the side window
has closed and hold the button for at least one
more second (follow-up adjustment).
The side window will be closed without the
automatic reversing function.
8080
Opening and closing
English 
