Get Light and visibility -> Mirrors Guide for Mercedes CLA 4 Door Third Generation (2025-2026)

Switch on the vehicle.

Press the î button on the combination

switch (/ page 126).

The wiper arms will return to their original

positions.

Switch o the vehicle.

Check the condition of the wiper blades regu-

larly and replace them in the event of visible

damage or ongoing smearing.

Maintenance display

Remove protective lm 1 from the mainte-

nance displays on the tips of the newly instal-

led wiper blades.

When the color of the maintenance displays

changes from black to yellow, replace the wiper

blades.

The duration until the color changes varies

depending on the usage conditions.

Mirrors

Operating the outside mirrors

WARNING Risk of accident due to adjust-

ing the vehicle settings while the vehicle is

in motion

You could lose control of the vehicle in the fol-

lowing situations in particular:

If you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion

If you fasten your seat belt while the vehi-

cle is in motion

Before starting the vehicle: in particular,

adjust the driver's seat, head restraint,

steering wheel and mirror, and fasten

your seat belt.

128

Light and visibility

WARNING Risk of accident due to mis-

judgment of distance when using the

front-passenger mirror

The outside mirror on the front passenger side

reects objects on a smaller scale. The

objects in view are in fact closer than they

appear.

Therefore, always look over your shoul-

der to check the actual distance

between you and the road users traveling

behind you.

To fold in or out: briey press button 2.

To adjust: use button 1 or 3 to select the

outside mirror to be adjusted.

Use button 4 to adjust the position of the

mirror glass.

If the battery has been disconnected or com-

pletely discharged, you will have to reset the

outside mirrors. Only then will the automatic

mirror folding function work properly.

To reset: briey press button 2.

An outside mirror that has been pushed out of

position can be engaged in position again as fol-

lows:

Vehicles without electrically folding outside

mirrors: manually move the outside mirror into

the correct position.

Vehicles with electrically folding outside mir-

rors: press and hold button 2.

You will hear a click and the mirror will audibly

click into place. The outside mirror will now be

set to the correct position.

Automatic anti-glare mirrors function

WARNING Risk of acid burns and poison-

ing due to the anti-glare mirror electrolyte

Electrolyte may escape if the glass in an auto-

matic anti-glare mirror breaks.

Light and visibility

129

The electrolyte is hazardous to health and cau-

ses irritation. It must not come into contact

with your skin, eyes, respiratory organs or

clothing or be swallowed.

If you come into contact with electrolyte,

observe the following:

Immediately rinse the electrolyte

from your skin with water and seek

medical attention.

If electrolyte comes into contact with

your eyes, immediately rinse them

thoroughly with clean water and seek

medical attention.

If the electrolyte is swallowed, imme-

diately rinse your mouth out thor-

oughly. Do not induce vomiting. Seek

medical attention immediately.

Immediately change out of clothing

which has been contaminated with

electrolyte.

If an allergic reaction occurs, seek

medical attention immediately.

The inside rearview mirror and the outside mirror

on the driver's side will automatically go into anti-

glare mode if light from a headlamp hits the sen-

sor on the inside rearview mirror.

System limits

The system will not go into anti-glare mode if:

The vehicle is switched o.

Reverse gear is engaged.

The interior lighting is switched on.

Front-passenger outside mirror parking position

function

The parking position makes parking easier.

The front-passenger outside mirror will swivel

downwards in the direction of the rear wheel on

the front passenger's side when:

The parking position is stored (/ page 131).

The front-passenger mirror is selected.

Reverse gear is engaged.

The front-passenger outside mirror will move back

to its original position when:

You shi the transmission to another transmis-

sion position.

You are traveling at a speed greater than

9 mph (15 km/h).

You press the button for the outside mirror on

the driver's side.

130

Light and visibility

Storing the parking position of the front-

passenger outside mirror using reverse gear

Storing

Press button 1 to select the front-passenger

outside mirror.

Engage reverse gear.

Move the front-passenger outside mirror into

the desired parking position using button 2.

Calling up

Press button 1 to select the front-passenger

outside mirror.

Engage reverse gear.

The front-passenger outside mirror will move

into the stored parking position.

Activating/deactivating the automatic mirror fold-

ing function

Multimedia system:

Settings

Vehicle

Open/Close

Activate or deactivate Automatic Mirror Fold-

ing

Light and visibility

131

Light and visibility -> Mirrors for Your Mercedes CLA 4 Door Third Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals