2025-2026 Mercedes CLA 4 Door Light and visibility -> Windshield wiper and windshield washer system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Light and visibility -> Windshield wiper and windshield washer system for Your Mercedes CLA 4 Door Third Generation (2025-2026)

Climate
R
If changes are made to the temperature set-
ting in the vehicle, the color of the ambient
lighting will change briey.
Greeting
R
When you get into the vehicle, a special color
animation will play.
Switching the interior lighting switch-o delay
time on/o
Multimedia system:
4
©
5
Settings
5
Light
5
Interior/Exterior Lighting
5
Interior Lighting Delay
#
Activate or deactivate Interior Lighting Delay.
If this function is active, the interior lighting
will be switched on for a short time aer the
end of the journey.
Windshield wiper and windshield washer system
Switching the windshield wipers on/o
1
g Windshield wipers o
2
Ä Automatic wiping, normal
3
Å Automatic wiping, frequent
4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
#
Turn the combination switch to the corre-
sponding position 1 - 5.
#
í Single wipe: press button 1 as far as
the point of resistance.
#
î Wiping with washer uid: press button
1 beyond the point of resistance.
%
Observe the notes on washing the vehicle in a
car wash (/ page 282).
Changing the windshield wiper blades
&
WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
#
Always switch o the windshield wipers
and vehicle before changing the wiper
blades.
126
Light and visibility
Moving the wiper arms into the replacement posi-
tion
#
Switch the vehicle on and then o again
immediately.
#
Within around 15 seconds, press and hold the
î button on the combination switch for
approximately three seconds (/ page 126).
The wiper arms will move into the replacement
position.
Removing the wiper blades
#
Fold the wiper arms away from the windshield.
#
Hold the wiper arm with one hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow 1 as
far as it will go.
#
Slide catch 2 in the direction of arrow 3
until it engages in the removal position.
#
Remove the wiper blade from the wiper arm in
the direction of arrow 4.
Installing the wiper blades
#
Insert the new wiper blade into the wiper arm
in the direction of arrow 1.
#
Slide catch 2 in the direction of arrow 3
until it engages in the locking position.
#
Make sure that the wiper blade is seated cor-
rectly.
#
Fold the wiper arms back onto the windshield.
Light and visibility
127
#
Switch on the vehicle.
#
Press the î button on the combination
switch (/ page 126).
The wiper arms will return to their original
positions.
#
Switch o the vehicle.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Maintenance display
#
Remove protective lm 1 from the mainte-
nance displays on the tips of the newly instal-
led wiper blades.
When the color of the maintenance displays
changes from black to yellow, replace the wiper
blades.
%
The duration until the color changes varies
depending on the usage conditions.
Mirrors
Operating the outside mirrors
&
WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
If you adjust the driver's seat, the head
restraint, the steering wheel or the mirror
while the vehicle is in motion
R
If you fasten your seat belt while the vehi-
cle is in motion
#
Before starting the vehicle: in particular,
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
128
Light and visibility

Related Topics

Popular Owner Manuals