Get Breakdown assistance Guide for Mercedes G Class SUV Third Generation (1990-2018)

Useful information ............................ 296

Where will I find...? ........................... 296

Flat tire .............................................. 298

Battery (vehicle) ................................ 299

Jump-starting .................................... 303

Towing and tow-starting .................. 305

Fuses .................................................. 308

295

Breakdown assistance

Useful information

This Operator's Manual describes all

models and all standard and optional

equipment of your vehicle available at the

time of publication of the Operator's

Manual. Country-specific differences are

possible. Please note that your vehicle may

not be equipped with all features

described. This also applies to safety-

related systems and functions.

Read the information on qualified

specialist workshops: (Y page 24).

Where will I find...?

Warning triangle

Setting up the warning triangle

Press-stud

;

Reflectors

Feet

Fold feet = down and out to the side.

Pull side reflectors ; up to form a triangle

and lock them at the top using press-

stud :.

First-aid kit

Check the expiration date on the first-aid

kit at least once a year. Replace the

contents if necessary, and replace missing

items.

Vehicle tool kit

General notes

When they leave the factory, vehicles are

not equipped with the tools needed to

change a wheel, such as a jack or lug

wrench. Some tools for changing a wheel

are specific to the vehicle. To obtain tools

approved for your vehicle, contact a

qualified specialist workshop.

The vehicle tool kit contains:

Vehicle tool kit bag with:

a fuse extractor

an Allen key, e.g. to operate the sliding

roof manually in an emergency

a pump lever for the vehicle jack

a screwdriver

Lug wrench

Jack

Vehicle tool kit

The vehicle tool kit is under the cover in the

footwell in front of the rear bench seat.

Fold cover : to the side.

Pull vehicle tool kit ; out by the tab.

Jack

Make sure that, while installing the

vehicle jack, there are no cables on the

holder, in order to avoid them becoming

trapped.

296

Where will I find...?

Breakdown assistance

The jack is located under the rear bench seat

on the right-hand side when viewed in the

direction of travel.

Fold rear bench seat (Y page 260)

forwards.

Open cover :.

Pull bar = upwards and detach from

tab ?.

Remove jack ;.

Exterior spare wheel bracket

General notes

WARNING

If the spare tire is more than 6 years old or is

not the same model as the regular tires, have

the spare tire replaced with a new tire at the

nearest Mercedes-Benz Center.

Never operate the vehicle with more than one

spare wheel mounted.

WARNING

The wheel or tire size as well as the tire type

of the spare wheel or emergency spare wheel

and the wheel to be replaced may differ.

Mounting an emergency spare wheel may

severely impair the driving characteristics.

There is a risk of an accident.

To avoid hazardous situations:

adapt your driving style accordingly and

drive carefully.

never mount more than one spare wheel or

emergency spare wheel that differs in size.

only use a spare wheel or emergency spare

wheel of a different size briefly.

do not switch ESP

off.

have a spare wheel or emergency spare

wheel of a different size replaced at the

nearest qualified specialist workshop.

Observe that the wheel and tire dimensions

as well as the tire type must be correct.

You must not exceed the maximum speed of

50 mph (80 km/h) when using spare wheels

of differing sizes.

When changing a wheel, you should also

observe the safety notes in the "Flat tire"

section (Y page 334).

The spare wheel is on the outer side of the

rear door.

Stainless-steel spare hub cap

Take the screwdriver out of the vehicle tool

kit (Y page 296).

Open the lock on cover ring : with

screwdriver = or a similar tool.

Fold tab ; down.

Where will I find...?

297

Breakdown assistance

Pull cover ring : apart and remove it.

Pull off cover panel ?.

When re-installing cover panel ?, make

sure that retainer A engages in recess

Removing the spare wheel

The spare wheel is heavy. Take particular note

of this when removing the spare wheel.

Remove wheel nuts :.

Remove the spare wheel.

Mounting the wheel

After changing a wheel:

Repair or replace the damaged wheel as

soon as possible and secure the spare

wheel in place again.

Secure the damaged wheel on the spare

wheel bracket with wheel nuts :. When

doing so, make sure that the wheel cannot

come loose.

When re-installing cover panel ?, make

sure that retainer B engages in recess

A(Y page 297).

Make sure that tab ; is below when re-

installing cover ring :(Y page 297).

For safety reasons, regularly check to

ensure that the wheel is securely fastened.

Flat tire

Preparing the vehicle

Stop the vehicle on solid, non-slippery and

level ground, as far away as possible from

traffic.

Switch on the hazard warning lamps

(Y page 104).

Apply the parking brake.

Bring the front wheels into the straight-

ahead position.

Move the selector lever to position P.

Switch off the engine.

Remove the SmartKey from the ignition

lock.

The steering wheel lock stays active for as

long as the SmartKey is removed.

All occupants must get out of the vehicle.

Make sure that they are not endangered as

they do so.

Make sure that no one is near the danger

area while a wheel is being changed.

Anyone who is not directly assisting in the

wheel change should, for example, stand

behind the barrier.

298

Flat tire

Breakdown assistance

Get out of the vehicle. Pay attention to

traffic conditions when doing so.

Close the driver's door.

Battery (vehicle)

Important safety notes

Special tools and expert knowledge are

required when working on the battery, e.g.

removal and installing. You should therefore

have all work involving the battery carried out

at a qualified specialist workshop.

WARNING

Work carried out incorrectly on the battery

can lead, for example, to a short circuit and

thus damage the vehicle electronics. This can

lead to function restrictions applying to

safety-relevant systems, e.g. the lighting

system, ABS (anti-lock braking system) or

ESP

(Electronic Stability Program). The

operating safety of your vehicle may be

restricted. You could lose control of the

vehicle, for example:

braking

in the event of abrupt steering maneuver

and/or when the vehicle's speed is not

adapted to the road conditions

There is a risk of an accident.

In the event of a short circuit or a similar

incident, contact a qualified specialist

workshop immediately. Do not drive any

further. You should have all work involving the

battery carried out at a qualified specialist

workshop.

If ABS malfunctions, the wheels can lock

during braking. This limits the steerability of

the vehicle when braking and may increase

the braking distance.

If ESP

malfunctions, the vehicle will not be

stabilized if it starts to skid or a wheel starts

to spin.

WARNING

Work carried out incorrectly on the battery

can, for example, lead to a short circuit and

damage your vehicle's electronic system. This

can disrupt driving safety systems such as

ABS (anti-lock braking system) or ESP

(Electronic Stability Program).

If ABS malfunctions, the wheels can lock

during braking. This limits the steerability

of the vehicle when braking and the braking

distance may increase. There is a risk of

accident.

If ESP

malfunctions, the vehicle will not be

stabilized if it starts to skid or a wheel starts

to spin. There is a risk of accident.

You should therefore have all work involving

the battery carried out at a qualified specialist

workshop.

WARNING

During the charging process, a battery

produces hydrogen gas. If a short circuit

occurs or sparks are created, the hydrogen

gas can ignite. There is a risk of an explosion.

Make sure that the positive terminal of a

connected battery does not come into

contact with vehicle parts.

Never place metal objects or tools on a

battery.

It is important that you observe the

described order of the battery terminals

when connecting and disconnecting a

battery.

When jump-starting, make sure that the

battery poles with identical polarity are

connected.

It is particularly important to observe the

described order when connecting and

disconnecting the jumper cables.

Never connect or disconnect the battery

terminals while the engine is running.

WARNING

Electrostatic build-up can lead to the creation

of sparks, which could ignite the highly

Battery (vehicle)

299

Breakdown assistance

explosive gases of a battery. There is a risk of

an explosion.

Before handling the battery, touch the vehicle

body to remove any existing electrostatic

build-up.

WARNING

Battery acid is caustic. There is a risk of injury.

Avoid contact with the skin, eyes or clothing.

Do not inhale any battery gases. Do not lean

over the battery. Keep children away from

batteries. Wash battery acid immediately with

water and seek medical attention.

Have the battery checked regularly at a

qualified specialist workshop.

Observe the service intervals in the

Maintenance Booklet or contact a qualified

specialist workshop for more information.

You should have all work involving the

battery carried out at a qualified specialist

workshop. In the exceptional case that it is

necessary for you to disconnect the battery

yourself, make sure that:

you switch off the engine and remove the

SmartKey. Check that all the indicator

lamps in the instrument cluster are off.

Otherwise, electronic components, such

as the alternator, may be damaged.

you first remove the negative terminal

clamp and then the positive terminal

clamp. Never swap the terminal clamps.

Otherwise, the vehicle's electronic

system may be damaged.

on vehicles with automatic transmission,

the transmission is locked in position P

after disconnecting the battery. The

vehicle is secured against rolling away.

You can then no longer move the vehicle.

The battery and the cover of the positive

terminal clamp must be installed securely

during operation.

Environmental note

Batteries contain dangerous

substances. It is against the

law to dispose of them with

the household rubbish. They

must be collected separately

and recycled to protect the

environment.

Dispose of batteries in an

environmentally friendly

manner. Take discharged

batteries to a qualified

specialist workshop or a

special collection point for

used batteries.

In order for the battery to achieve the

maximum possible service life, it must always

be sufficiently charged.

Comply with safety precautions and take

protective measures when handling

batteries.

Risk of explosion.

Fire, open flames and smoking are

prohibited when handling the

battery. Avoid creating sparks.

Battery acid is caustic.

Avoid contact with skin, eyes or

clothing.

Wear eye protection.

Keep children away.

Observe this Operator's Manual.

The vehicle battery, like other batteries, can

discharge over time if you do not use the

vehicle. In this case, have the battery

300

Battery (vehicle)

Breakdown assistance

disconnected at a qualified specialist

workshop. You can also charge the battery

with a charger recommended by Mercedes-

Benz. Contact a qualified specialist workshop

for further information.

Explosive gases are created during charging

and jump-starting.

For safety reasons, Mercedes-Benz

recommends that you only use batteries

which have been tested and approved for

your vehicle by Mercedes-Benz. These

batteries provide increased impact

protection to prevent vehicle occupants from

suffering acid burns should the battery be

damaged in the event of an accident.

Have the battery condition of charge checked

more frequently if you use the vehicle mainly

for short trips or if you leave it standing idle

for a lengthy period. Consult a qualified

specialist workshop if you wish to leave your

vehicle parked for a long period of time.

Remove the SmartKey if you park the

vehicle and do not require any electrical

consumers. The vehicle will then use very

little energy, thus conserving battery

power.

i If the power supply has been interrupted,

e.g. due to a discharged battery, you will

have to:

set the clock. Information on setting the

clock can be found in the separate

operating instructions.

On vehicles with COMAND and a

navigation system, the clock is set

automatically.

reset the head restraints on the front

seats (Y page 87)

reset the function for folding the exterior

mirrors in/out automatically, by folding

the mirrors out once (Y page 93).

Charging the battery

WARNING

During charging and jump-starting, explosive

gases can escape from the battery. There is a

risk of an explosion.

Particularly avoid fire, open flames, creating

sparks and smoking. Ensure there is sufficient

ventilation while charging and jump-starting.

Do not lean over a battery.

WARNING

Battery acid is caustic. There is a risk of injury.

Avoid contact with the skin, eyes or clothing.

Do not inhale any battery gases. Do not lean

over the battery. Keep children away from

batteries. Wash battery acid immediately with

water and seek medical attention.

WARNING

A discharged battery can freeze at

temperatures below freezing point. When

jump-starting the vehicle or charging the

battery, gases can escape from the battery.

There is a risk of an explosion.

Allow the frozen battery to thaw out before

charging it or jump-starting.

Only charge the battery using the jump-

starting connection point.

Only use battery chargers with a

maximum charging voltage of 14.8 V.

Only charge the installed battery with a

battery charger which has been tested and

approved by Mercedes-Benz. These battery

chargers allow the battery to be charged

while still installed in the vehicle.

A battery charger unit specially adapted for

Mercedes-Benz vehicles and tested and

approved by Mercedes-Benz is available as an

accessory. Contact an authorized Mercedes-

Benz Center for information and availability.

Charge the battery in accordance with the

operating instructions for the battery

charger.

Battery (vehicle)

301

Breakdown assistance

The jump-starting connection point is in the

engine compartment (Y page 303).

Read the operating instructions for the

battery charger.

Open the hood (Y page 283).

Connect the battery charger to the positive

terminal and ground point in the same

order as when connecting the donor

battery in the jump-starting procedure

(Y page 303).

302

Battery (vehicle)

Breakdown assistance

Jump-starting

WARNING

Battery acid is caustic. There is a risk of injury.

Avoid contact with the skin, eyes or clothing. Do not inhale any battery gases. Do not lean over

the battery. Keep children away from batteries. Wash battery acid immediately with water and

seek medical attention.

WARNING

During charging and jump-starting, explosive gases can escape from the battery. There is a risk

of an explosion.

Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient

ventilation while charging and jump-starting. Do not lean over a battery.

WARNING

During the charging process, a battery produces hydrogen gas. If a short circuit occurs or sparks

are created, the hydrogen gas can ignite. There is a risk of an explosion.

Make sure that the positive terminal of a connected battery does not come into contact with

vehicle parts.

Never place metal objects or tools on a battery.

It is important that you observe the described order of the battery terminals when connecting

and disconnecting a battery.

When jump-starting, make sure that the battery poles with identical polarity are connected.

It is particularly important to observe the described order when connecting and disconnecting

the jumper cables.

Never connect or disconnect the battery terminals while the engine is running.

WARNING

A discharged battery can freeze at temperatures below freezing point. When jump-starting the

vehicle or charging the battery, gases can escape from the battery. There is a risk of an explosion.

Allow the frozen battery to thaw out before charging it or jump-starting.

WARNING

Non-combusted fuel can collect in the exhaust system and ignite. There is a risk of fire. Avoid

repeated and lengthy starting attempts.

Avoid repeated and lengthy starting attempts. Otherwise, non-combusted fuel may

damage the catalytic converter and create a risk of fire.

Do not use a rapid charging device to start the vehicle.

Make sure the jumper cables are not damaged.

Make sure the jumper cables are not touching any other metal objects when they are

connected to the battery.

Jump-starting

303

Breakdown assistance

If the indicator/warning lamps do not light up at temperatures around or below freezing point,

the discharged battery is likely to be frozen (a commonplace scenario). In this case, do not

jump-start the vehicle or recharge the battery.

Once the battery has thawed out, its service life may be dramatically reduced.

The starting characteristics can be impaired, particularly at low temperatures.

It is recommended that you have the thawed out battery checked at a qualified specialist

workshop.

Do not start the vehicle using a rapid charging device. If your vehicle's battery is discharged,

the engine can be jump-started from another vehicle or from a second battery using jumper

cables. Observe the following points:

The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible,

jump-start the vehicle using a second battery or a jump-starting device.

Vehicles with a gasoline engine: only jump-start the vehicle when the engine and exhaust

system are cold.

Do not start the engine if the battery is frozen. Let the battery thaw first.

Jump-starting may only be performed from batteries with a nominal voltage of 12 V.

Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.

If the battery is fully discharged, leave the battery that is being used to jump-start connected

for a few minutes before attempting to start. This charges the empty battery a little.

Make sure that the two vehicles do not touch.

Make sure that:

the jumper leads are not damaged.

when the jumper cables are connected to the battery, uninsulated sections of the terminal

clamp do not come into contact with other metal sections.

The jumper cables cannot come into contact with parts such as the pulley or the fan. These

parts move when the engine is started and while it is running.

Apply the parking brake.

Move the selector lever to position P.

Switch off all electrical consumers (e.g. radio, blower, etc.).

Open the hood (Y page 283).

304

Jump-starting

Breakdown assistance

Position number B identifies the charged battery of the other vehicle or an equivalent jump-

starting device.

The jump-start terminal point consists of terminals ; and ?.

Lift up cover : of positive terminal ; in the direction of the arrow.

Connect positive terminal ; on your vehicle to positive terminal ? of donor battery B

using the jumper cable. beginning with your own battery.

Start the engine of the donor vehicle and run it at idling speed.

Connect negative terminal A of donor battery B to ground point = of your vehicle using

the jumper cable, connecting the jumper cable to donor battery B first.

Start the engine.

First, remove the jumper cable from ground point = and negative terminal A, then from

positive terminal ; and positive terminal ?, each time disconnecting from the battery on

your own vehicle first.

Have the battery checked at a qualified specialist workshop.

Jump-starting is not considered to be a normal operating condition.

Jumper cables and further information regarding jump starting can be obtained at any

qualified specialist workshop.

Towing and tow-starting

Important safety notes

WARNING

The vehicle is braked when the HOLD function

or DISTRONIC PLUS is activated. Therefore,

deactivate HOLD and DISTRONIC PLUS if the

vehicle is to be towed.

The vehicle can be towed a maximum of

30 miles (50km). The towing speed of

30 mph (50 km/h) must not be exceeded.

Towing and tow-starting

305

Breakdown assistance

If the vehicle has to be towed more than

30 miles (50km), the entire vehicle must be

raised and transported.

Only secure the tow cable or tow bar to

the towing eyes. You could otherwise

damage the vehicle.

Do not tow with sling-type equipment.

This could damage the vehicle.

Do not use the towing eyes for recovery

purposes as this could damage the vehicle.

If in doubt, recover the vehicle with a crane.

When towing, pull away slowly and

smoothly. If the tractive power is too high,

the vehicles could be damaged.

Your vehicles is equipped with an

automatic transmission. Therefore, you

must not have the vehicle tow-started. The

transmission may otherwise be damaged.

WARNING

If the weight of the vehicle to be towed or tow-

started is greater than the permissible gross

weight of your vehicle:

the towing eye could detach itself

the vehicle/trailer combination could

rollover.

There is a risk of an accident.

When towing or tow-starting another vehicle,

its weight should not be greater than the

permissible gross weight of your vehicle.

Information on your vehicle's gross vehicle

weight rating can be found on the vehicle

identification plate (Y page 342).

It is better to have the vehicle transported

than to have it towed.

If the transfer case can be shifted into neutral

N, you can tow the vehicle.

If the transfer case cannot be shifted into

neutral N, you can tow the vehicle with one

axle raised. Please bear the following in mind:

remove the propeller shaft between the

transfer case and the rolling axle.

turn the SmartKey to position 1 in the

ignition lock (Y page 139).

The battery must be connected and charged.

Otherwise, you:

cannot turn the SmartKey in the ignition

lock to position 2(Y page 139)

cannot shift the automatic transmission to

position N

Deactivate the automatic locking feature

(Y page 75). You could otherwise be locked

out when pushing or towing the vehicle.

Towing eyes

Towing eyes, front

Towing eye, rear

306

Towing and tow-starting

Breakdown assistance

Rear towing eye : is located under the

bumper, on the left-hand side when viewed in

the direction of travel.

Towing a vehicle with both axles on

the ground

It is important that you observe the safety

instructions when towing away your vehicle

(Y page 305).

Switch on the hazard warning lamps

(Y page 104).

In order to signal a change of direction

when towing the vehicle with the hazard

warning lamps switched on, use the

combination switch as usual. In this case,

only the turn signals for the desired

direction flash. When you reset the

combination switch, the hazard warning

lamps start flashing again.

Turn the SmartKey to position 2 in the

ignition lock (Y page 139).

When the vehicle is stationary, depress the

brake pedal and keep it depressed.

Shift the transfer case to

neutral(Y page 195).

Shift the automatic transmission to

position N.

Release the brake pedal.

Release the parking brake (Y page 157).

The transmission can only change gear if

the battery has sufficient charge.

If you cannot move the selector lever to N,

the propeller shafts to the driven axles

must be removed.

Transporting the vehicle

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise,

the vehicle could be damaged.

Use the towing eyes to pull the vehicle if it

needs to be transported on a trailer or

transporter (Y page 306).

Apply the parking brake.

Turn the SmartKey to position 2 in the

ignition lock (Y page 139).

Move the selector lever to N.

Shift the transfer case to neutral

(Y page 195).

Secure the towing cable to the towing eyes

(Y page 306).

Make sure that the vehicle cannot roll

away.

Release the parking brake.

Load the vehicle onto the transporter.

As soon as the vehicle has been loaded:

Apply the parking brake.

Shift the automatic transmission to

position P.

Turn the SmartKey to position 0 in the

ignition lock (Y page 139) and remove it.

Secure the vehicle.

Recovering a vehicle that has become

stuck

When recovering a vehicle that has

become stuck, pull it as smoothly and

evenly as possible. Excessive tractive

power could damage the vehicles.

If the drive wheels have become stuck in

loose or muddy ground, pull the vehicle out

with extreme caution, especially so if the

vehicle is loaded.

Never attempt to recover a stuck vehicle with

a trailer attached.

Pull out the vehicle backwards, if possible

using the tracks it made when it became

stuck.

Towing and tow-starting

307

Breakdown assistance

Towing in the event of malfunctions

General notes

If you are removing the propeller shaft,

use M10 nuts as spacers on the M8 bolts

and secure them with M8 nuts.

New self-locking nuts must be used when

the propeller shafts are refitted.

Observe the safety notes as you do so

(Y page 305).

Consult an authorized Mercedes-Benz

Center.

Engine damage, gear damage or

electrical malfunctions

Move the selector lever to

position N(Y page 145).

Shift the transfer case to

neutral(Y page 195).

In the event of damage to the transfer

case

Have the propeller shafts between the axles

and the transfer case removed.

In the event of damage to the front axle

Have the propeller shaft between the rear

axle and the transfer case removed.

Have the vehicle towed with the front axle

raised.

In the event of damage to the rear axle

Have the propeller shaft between the front

axle and the transfer case removed.

Have the vehicle towed with the rear axle

raised and with wheel rollers under the front

axle.

Tow-starting (emergency engine

starting)

Vehicles with automatic transmission

must not be tow-started. You could

otherwise damage the automatic

transmission.

You can find information on "Jump-starting"

under (Y page 303).

Fuses

Important safety notes

WARNING

If you manipulate or bridge a faulty fuse or if

you replace it with a fuse with a higher

amperage, the electric cables could be

overloaded. This could result in a fire. There

is a risk of an accident and injury.

Always replace faulty fuses with the specified

new fuses having the correct amperage.

Only use fuses that have been approved

for Mercedes-Benz vehicles and which

have the correct fuse rating for the system

concerned. Otherwise, components or

systems could be damaged.

The fuses in your vehicle serve to close down

faulty circuits. If a fuse blows, all the

components on the circuit and their functions

stop operating.

Blown fuses must be replaced with fuses of

the same rating, which you can recognize by

the color and value. The fuse ratings are listed

in the fuse allocation chart.

If a fuse has blown, contact a breakdown

service or an authorized Mercedes-Benz

Center.

If a newly inserted fuse also blows, have the

cause traced and rectified at a qualified

specialist workshop, e.g. an authorized

Mercedes-Benz Center.

308

Fuses

Breakdown assistance

Before changing a fuse

Park the vehicle and apply the parking

brake.

Switch off all electrical consumers.

Remove the SmartKey from the ignition

lock.

All indicator lamps in the instrument cluster

must be off.

The fuses are located in various fuse boxes:

Main fuse box on the driver's side of the

dashboard

Fuse box in the front-passenger footwell

Fuse box in the transmission tunnel

Fuse box in the battery case

Fuse box in the cargo compartment

The fuse allocation chart and the spare fuses

are in the main fuse box on the dashboard

(Y page 309).

You will find the fuse removal device in the

vehicle tool kit (Y page 296).

Dashboard fuse box

Do not use a pointed object such as a

screwdriver to open the cover in the

dashboard. You could damage the

dashboard or the cover.

Make sure that no moisture can enter the

fuse box when the cover is open.

When closing the cover, make sure that it

is lying correctly on the fuse box. Moisture

seeping in or dirt could otherwise impair

the operation of the fuses.

Open the front-passenger door.

To open: pull cover : outwards in the

direction of the arrow and remove it.

To close: clip in cover : on the front of

the dashboard.

Fold cover : inwards until it engages.

Fuse box in the front-passenger

footwell

Make sure that no moisture can enter the

fuse box when the cover is open.

When closing the cover, make sure that it

is lying correctly on the fuse box. Moisture

seeping in or dirt could otherwise impair

the operation of the fuses.

Unscrew screws :.

Lift up cover ; in the direction of the

arrow.

Fuses

309

Breakdown assistance

Fuse box

Fuse box in the transmission tunnel

Make sure that no moisture can enter the

fuse box when the cover is open.

When closing the cover, make sure that it

is lying correctly on the fuse box. Moisture

seeping in or dirt could otherwise impair

the operation of the fuses.

Fold down the cup holder on the center

console (Y page 262).

Adjust the front-passenger seat to its

foremost position (Y page 86).

To open: remove screws :.

Remove cover ; in the direction of the

arrow.

To close: clip in cover ;.

Install cover ; with screws :.

Fuse box in the battery case

The fuses in the battery case do not usually

need to be replaced. If a fuse change is

necessary, consult a qualified specialist

workshop.

Fuse box in the cargo compartment

Make sure that no moisture can enter the

fuse box when the cover is open.

When closing the cover, make sure that it

is lying correctly on the fuse box. Moisture

seeping in or dirt could otherwise impair

the operation of the fuses.

The fuse box is located under a cover on the

left in the cargo compartment.

310

Fuses

Breakdown assistance

Breakdown assistance for Your Mercedes G Class SUV Third Generation (1990-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals