1990-2018 Mercedes G Class SUV Breakdown assistance -> Flat tire User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Breakdown assistance -> Flat tire for Your Mercedes G Class SUV Third Generation (1990-2018)

X
Pull cover ring : apart and remove it.
X
Pull off cover panel ?.
i
When re-installing cover panel ?, make
sure that retainer A engages in recess
B.
Removing the spare wheel
The spare wheel is heavy. Take particular note
of this when removing the spare wheel.
X
Remove wheel nuts :.
X
Remove the spare wheel.
Mounting the wheel
After changing a wheel:
X
Repair or replace the damaged wheel as
soon as possible and secure the spare
wheel in place again.
X
Secure the damaged wheel on the spare
wheel bracket with wheel nuts :. When
doing so, make sure that the wheel cannot
come loose.
X
When re-installing cover panel ?, make
sure that retainer B engages in recess
A(Y page 297).
X
Make sure that tab ; is below when re-
installing cover ring :(Y page 297).
X
For safety reasons, regularly check to
ensure that the wheel is securely fastened.
Flat tire
Preparing the vehicle
X
Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.
X
Switch on the hazard warning lamps
(Y page 104).
X
Apply the parking brake.
X
Bring the front wheels into the straight-
ahead position.
X
Move the selector lever to position P.
X
Switch off the engine.
X
Remove the SmartKey from the ignition
lock.
The steering wheel lock stays active for as
long as the SmartKey is removed.
X
All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.
X
Make sure that no one is near the danger
area while a wheel is being changed.
Anyone who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
298
Flat tire
Breakdown assistance
X
Get out of the vehicle. Pay attention to
traffic conditions when doing so.
X
Close the driver's door.
Battery (vehicle)
Important safety notes
Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installing. You should therefore
have all work involving the battery carried out
at a qualified specialist workshop.
G
WARNING
Work carried out incorrectly on the battery
can lead, for example, to a short circuit and
thus damage the vehicle electronics. This can
lead to function restrictions applying to
safety-relevant systems, e.g. the lighting
system, ABS (anti-lock braking system) or
ESP
®
(Electronic Stability Program). The
operating safety of your vehicle may be
restricted. You could lose control of the
vehicle, for example:
R
braking
R
in the event of abrupt steering maneuver
and/or when the vehicle's speed is not
adapted to the road conditions
There is a risk of an accident.
In the event of a short circuit or a similar
incident, contact a qualified specialist
workshop immediately. Do not drive any
further. You should have all work involving the
battery carried out at a qualified specialist
workshop.
If ABS malfunctions, the wheels can lock
during braking. This limits the steerability of
the vehicle when braking and may increase
the braking distance.
If ESP
®
malfunctions, the vehicle will not be
stabilized if it starts to skid or a wheel starts
to spin.
G
WARNING
Work carried out incorrectly on the battery
can, for example, lead to a short circuit and
damage your vehicle's electronic system. This
can disrupt driving safety systems such as
ABS (anti-lock braking system) or ESP
®
(Electronic Stability Program).
R
If ABS malfunctions, the wheels can lock
during braking. This limits the steerability
of the vehicle when braking and the braking
distance may increase. There is a risk of
accident.
R
If ESP
®
malfunctions, the vehicle will not be
stabilized if it starts to skid or a wheel starts
to spin. There is a risk of accident.
You should therefore have all work involving
the battery carried out at a qualified specialist
workshop.
G
WARNING
During the charging process, a battery
produces hydrogen gas. If a short circuit
occurs or sparks are created, the hydrogen
gas can ignite. There is a risk of an explosion.
R
Make sure that the positive terminal of a
connected battery does not come into
contact with vehicle parts.
R
Never place metal objects or tools on a
battery.
R
It is important that you observe the
described order of the battery terminals
when connecting and disconnecting a
battery.
R
When jump-starting, make sure that the
battery poles with identical polarity are
connected.
R
It is particularly important to observe the
described order when connecting and
disconnecting the jumper cables.
R
Never connect or disconnect the battery
terminals while the engine is running.
G
WARNING
Electrostatic build-up can lead to the creation
of sparks, which could ignite the highly
Battery (vehicle)
299
Breakdown assistance
Z

Related Topics

Popular Owner Manuals