Displaying vehicle data
Multimedia system:
4
Vehicle
5
e
DYNAMIC SELECT
#
Select Vehicle Data.
The following information is displayed:
R
Compass
R
Wheel angle
R
Incline
R
Gradient
R
Altitude
R
LOW RANGE (/ page 146)
R
Locking (/ page 147)
To display engine data
Multimedia system:
4
Vehicle
5
e
DYNAMIC SELECT
#
Select Engine Data.
%
The actual (maximum) values that can be ach-
ieved for engine output and engine torque
may deviate from the certied values within
the country-specic guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specic guidelines).
Factors that can inuence this are, for exam-
ple:
R
Sea level
R
Fuel grade
R
Outside temperature
R
Operating temperature of the engine
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown in the media display may devi-
ate from the actual values.
G-Mode
G-Mode O is an additional drive program for
o-road journeys and is not suitable for use on
rm road surfaces. O is automatically activa-
ted if one of the following conditions is met:
R
you shi the transfer case to the
LOW RANGE
o-road gear (/ page 146).
R
you engage at least one dierential lock
(/ page 148).
Display O appears in the Instrument Display.
O is automatically deactivated again if the fol-
lowing conditions are met:
R
you shi the transfer case to the on-road posi-
tion
HIGH RANGE.
R
you disengage all dierential locks.
Not all driving and driving safety systems are
available in O under certain circumstances.
Observe the system limits of the transfer case
(/ page 146) and the dierential locks
(/ page 147).
It is not possible to change the drive program with
the DYNAMIC SELECT switch in O. The
DYNAMIC SELECT switch only works again when
O has been deactivated.
140
Driving and parking
English 
