2020-2026 Mercedes GLA SUV Children in the vehicle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Children in the vehicle for Your Mercedes GLA SUV Second Generation (2020-2026)

Brief overview of most important points
Safely transporting children in the vehicle
Always observe the following when transporting
children:
R
Never leave children unattended in the vehicle
(/ page 115).
R
Secure children up to a height of 1.50 m on
the seat (see illustration above) properly with
a suitable and approved child restraint system
(/ page 120), and secure small children in a
rearward-facing child restraint system.
R
Observe the child restraint system manufac-
turer's installation instructions.
Le/right rear seat (preferred seats)
Preferred securing system:
®
LATCH-type (ISOFIX) securing rings
(/ page 125)
or
°
i‑Size securing rings (/ page 127)
and
¯
Also secure Top Tether if present
(/ page 132).
Alternative securing system:
7
Vehicle seat belt (/ page 134)
¯
Additionally attach Top Tether if recom-
mended by the manufacturer of the child
restraint system (/ page 132).
The following child restraint systems within the
Universal category are approved: U, UF, i-U, IUF.
Observe the other alternatives for use
(/ page 125).
Front passenger seat
Securing system:
7
Vehicle seat belt (/ page 134)
Be sure to observe:
R
If the front passenger seat is occupied, ensure
that the status of the front passenger airbag is
correct for the current situation
(/ page 101).
The following child restraint systems within the
Universal category are approved: U
(*)
, UF.
Observe the other alternatives for use
(/ page 127).
(*) rearward-facing child restraint systems only in
combination with automatic airbag shuto
Children in the vehicle
113
F247 0074 02
Centre rear seat
Securing system:
7
Vehicle seat belt (/ page 134)
The following belt-secured child restraint systems
within the Universal category are approved: U, UF.
Observe the other alternatives for use
(/ page 134).
Important safety notes
Basic information
Be diligent
Bear in mind that negligence when securing a
child in the child restraint system may have seri-
ous consequences. Always be diligent in securing
a child carefully before every journey.
Never allow babies and children to travel sitting
on the lap of another vehicle occupant.
To improve protection for children younger than
12 years old or under 1.50 m in height,
Mercedes-Benz recommends you observe the fol-
lowing information:
R
Always secure the child in a child restraint sys-
tem suitable for this Mercedes-Benz vehicle.
R
The child restraint system must be appropriate
to the age, weight and size of the child.
R
The vehicle seat must be suitable for the child
restraint system to be tted:
-
LATCH-type (ISOFIX) securing rings:
(/ page 125)
-
i‑Size securing rings: (/ page 127)
-
Securing with the vehicle seat belt:
(/ page 127)
Accident statistics show that children secured on
the rear seats are generally safer than children
secured on the front seats. For this reason,
Mercedes-Benz strongly advises that you t a
child restraint system to a rear seat.
The generic term child restraint system
The generic term child restraint system is used in
this Owner's Manual. A child restraint system is,
for example:
R
a baby car seat
R
a rearward-facing child seat
R
a forward-facing child seat
R
a child booster seat – Mercedes-Benz recom-
mends using a child booster seat
with a back-
rest and seat belt guide
Observe laws and legal requirements
Always observe the legal requirements when
using a child restraint system in the vehicle.
Make sure that the child restraint system is
approved in accordance with the valid test speci-
cations and guidelines. Further information can
be obtained at a qualied specialist workshop.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre for this purpose.
114
Children in the vehicle – Important safety notes
F247 0074 02
Securing systems for child restraint systems in
the vehicle
Only use the following securing systems for child
restraint systems:
R
the ISOFIX/LATCH or i-Size securing rings
R
the vehicle's seat belt system
R
the Top Tether anchorages
Simply attaching to the ISOFIX/LATCH securing
rings or i‑Size securing rings on the vehicle can
reduce the risk of tting the child restraint system
incorrectly.
When securing a child with the integrated seat
belt of the ISOFIX/LATCH or i-Size child restraint
system, always comply with the permissible gross
weight for the child and child restraint system
(/ page 131).
Important warning notices
Always secure a child restraint system correctly
&
WARNING Risk of injury or death due to
incorrect installation of the child restraint
system
The child can then not be protected or
restrained as intended.
#
Be sure to comply with the manufactur-
er's installation instructions for the child
restraint system and its correct use.
#
Make sure that the entire base of the
child restraint system always rests on
the sitting surface of the seat.
#
Never place objects (e.g. cushions)
under or behind the child restraint sys-
tem.
#
Use child restraint systems only with the
original cover designed for them.
#
Always replace damaged covers with
genuine covers.
R
Always observe the vehicle-specic informa-
tion.
-
Fitting an ISOFIX or i‑Size child restraint
system on the rear seat (/ page 131).
-
Securing the child restraint system with
the seat belt (/ page 134).
R
Observe the warning labels in the vehicle inte-
rior and on the child restraint system.
&
WARNING Risk of injury or death due to
unsecured child restraint systems in the
vehicle
If the child restraint system is incorrectly tted
or not secured, it can become detached.
The child cannot then be protected or
restrained as intended.
The unused child restraint system can be
become detached and strike vehicle occu-
pants.
#
Always comply with the manufacturer's
installation instructions for the child
restraint system and its correct use.
Children in the vehicle – Important safety notes
115
F247 0074 02
#
Always t child restraint systems cor-
rectly, even if they are transported
unused in the vehicle.
Do not modify the child restraint system
&
WARNING Risk of injury due to modica-
tions to the child restraint system
The child restraint system can no longer func-
tion properly. This poses an increased risk of
injury.
#
Never modify a child restraint system.
#
Only ax accessories which have been
specially approved for this child restraint
system by the child restraint system's
manufacturer.
Only use child restraint systems which are in
proper working condition
&
WARNING Risk of injury or death caused
by the use of damaged child restraint sys-
tems
Child restraint systems or their retaining sys-
tems that have been subjected to stress in an
accident may not be able to perform their
intended protective function.
It may be the case that the child cannot be
properly restrained.
#
Always immediately replace child
restraint systems that have been dam-
aged or involved in an accident.
#
Have the securing systems for the child
restraint systems checked at a qualied
specialist workshop before installing a
child restraint system again.
Avoid direct sunlight
&
WARNING Risk of burns when the child
seat is exposed to direct sunlight
If the child restraint system is exposed to
direct sunlight or heat, parts could heat up.
Children could suer burns from these parts,
particularly on metallic parts of the child
restraint system.
#
Always make sure that the child restraint
system is not exposed to direct sunlight.
#
Protect the child restraint system with a
blanket, for example.
#
If the child restraint system has been
exposed to direct sunlight, allow it to
cool before securing a child into it.
#
Never leave children unattended in the
vehicle.
116
Children in the vehicle – Important safety notes
F247 0074 02
Observe when stopping or parking
&
WARNING Risk of fatal injury due to expo-
sure to extreme heat or cold in the vehicle
If persons, particularly children, are subjected
to prolonged exposure to intense heat or cold,
there is a risk of severe injury or even death.
#
Never leave persons, particularly chil-
dren, unattended in the vehicle.
&
WARNING Risk of accident– and injury
due to children le unattended in the vehi-
cle
When children are le unattended in the vehi-
cle, they can be expected in particular to
R
open doors, thereby endangering other
persons or road users.
R
get out and be struck by oncoming trac.
R
operate vehicle equipment and become
trapped, for example.
In addition, the children could also set the
vehicle in motion, for example by:
R
releasing the parking brake.
R
changing the drive range.
R
starting the vehicle.
#
Never leave children unattended in the
vehicle.
#
When leaving the vehicle, always take the
key with you and lock the vehicle.
#
Keep the key out of reach of children.
Overview of warning stickers in the vehicle
1
Front passenger airbag warning (on the front
passenger sun visor) (/ page 118)
2
Vehicles without automatic front passenger
airbag shuto warning (visible when the front
passenger door is open) (/ page 120)
Children in the vehicle – Important safety notes
117
F247 0074 02
Notes on rearward-facing and forward-facing child
restraint systems on the front passenger seat
&
WARNING Risk of injury or death when
using a rearward-facing child restraint sys-
tem while the front passenger airbag is
enabled
If you secure a child in a rearward-facing child
restraint system on the front passenger seat
and the PASSENGER AIR BAG OFF indicator
lamp is o, the front passenger airbag can
deploy in the event of an accident.
The child could be struck by the airbag.
#
Always ensure that the front passenger
airbag is disabled. The PASSENGER AIR
BAG OFF indicator lamp must be lit.
#
NEVER use a rearward-facing child
restraint system on a seat with an ENA-
BLED FRONT AIRBAG. This can result in
the DEATH of or SERIOUS INJURY to the
CHILD.
Observe the specic instructions for the rear-
ward-facing and forward-facing child restraint sys-
tems (/ page 129).
Warning notice on the front passenger sun visor
If it is absolutely necessary to install a child
restraint system on the front passenger seat,
always observe the additional notes.
R
the notes on automatic front passenger airbag
shuto (/ page 102).
R
When using a rearward-facing child restraint
system on the front passenger seat, the front
passenger airbag must always be disabled.
This is only the case if the PASSENGER AIR
BAG OFF indicator lamp is lit continuously
(/ page 101).
R
The front passenger airbag is enabled when
the PASSENGER AIR BAG OFF indicator lamp
is not lit. The front passenger airbag may be
deployed during an accident. In that case, do
not use rearward-facing child restraint sys-
tems.
Information on the automatic front passenger air-
bag shuto
If the front passenger seat is occupied, ensure,
both before and during the journey, that the sta-
tus of the front passenger airbag is correct for the
current situation.
&
WARNING Risk of injury or death due to
objects between the seat surface and the
child restraint system
Objects between the seat surface and the
child restraint system could aect the function
of the automatic co-driver airbag shuto.
118
Children in the vehicle – Important safety notes
F247 0074 02
#
Do not place any objects between the
seat surface and the child restraint sys-
tem.
#
Make sure that the entire base of the
child restraint system is always resting
on the seat surface of the co-driver seat.
#
The backrest of the forward-facing child
restraint system must, as far as possible,
be resting on the seat backrest of the
co-driver seat.
#
It is essential to comply with the child
restraint system manufacturer's installa-
tion instructions.
When tting a child restraint system to the front
passenger seat, observe the vehicle-specic infor-
mation (/ page 118).
Rearward-facing child restraint system on the
front passenger seat
If a rearward-facing child restraint system is tted
on the front passenger seat, the front passenger
airbag must be disabled. The PASSENGER AIR
BAG OFF indicator lamp must light up continu-
ously (/ page 101).
&
WARNING Risk of injury or death when
using a rearward-facing child restraint sys-
tem while the front passenger airbag is
enabled
If you secure a child in a rearward-facing child
restraint system on the front passenger seat
and the PASSENGER AIR BAG OFF indicator
lamp is o, the front passenger airbag can
deploy in the event of an accident.
The child could be struck by the airbag.
#
Always ensure that the front passenger
airbag is disabled. The PASSENGER AIR
BAG OFF indicator lamp must be lit.
#
NEVER use a rearward-facing child
restraint system on a seat with an ENA-
BLED FRONT AIRBAG. This can result in
the DEATH of or SERIOUS INJURY to the
CHILD.
%
The front passenger airbag is enabled
depending on the child restraint system and
the stature of the child. The PASSENGER AIR
BAG OFF indicator lamp does not light up.
The front passenger airbag may be deployed
during an accident. If the front passenger air-
bag is in this status, no rearward-facing child
restraint system may be tted on the front
passenger seat.
Instead, t the rearward-facing child restraint
system to a suitable rear seat.
Forward-facing child restraint system on the front
passenger seat
If a forward-facing child restraint system is tted
on the front passenger seat, the front passenger
airbag may be automatically enabled or disabled.
The status of the front passenger airbag depends
on the child restraint system and the stature of
the child.
The PASSENGER AIR BAG OFF indicator lamp is
either lit continuously, or it is not lit
(/ page 101). Always observe the following infor-
mation.
Children in the vehicle – Important safety notes
119
F247 0074 02
&
WARNING Risk of injury or death caused
by incorrect positioning of the child
restraint system
If you secure a child in a forward-facing child
restraint system on the front passenger seat
and you position the front passenger seat too
close to the cockpit, in the event of an acci-
dent, the child could:
R
Come into contact with the vehicle interior
if the PASSENGER AIR BAG OFF indicator
lamp is lit, for example.
R
Be struck by the airbag if the PASSENGER
AIR BAG OFF indicator lamp is o.
#
Always move the front passenger seat as
far back as possible. In doing so, always
make sure that the shoulder belt strap is
correctly routed from the seat belt outlet
of the vehicle to the shoulder belt guide
on the child restraint system. The shoul-
der belt strap must be routed forwards
and downwards from the seat belt outlet.
If necessary, adjust the passenger seat
accordingly.
#
Always comply with the child restraint
system manufacturer's installation
instructions.
Notes on vehicles without automatic front
passenger airbag shuto
Vehicles without automatic front passenger airbag
shuto have a special sticker axed to the side of
the cockpit on the front passenger side
(/ page 117).
Make sure you observe the following information:
R
Never t a rearward-facing child restraint sys-
tem to the front passenger seat
R
Always t a rearward-facing child restraint sys-
tem to a suitable rear seat
R
Notes on rearward-facing and forward-facing
child restraint systems on the front passenger
seat (/ page 118)
Suitable child restraint systems for the transport
of children
Information on the advantage of a rearward-facing
child restraint system
Transport a baby in a suitable rearward-facing
child restraint system only. It is also preferable to
transport a small child in a suitable rearward-
facing child restraint system. In this case, the
child sits in the opposite direction to the direction
of travel and faces backwards.
Babies and small children have comparatively
weak neck muscles in relation to the size and
weight of their head. The risk of injury to the cer-
vical spine during an accident can be reduced in a
rearward-facing child restraint system.
Approval categories for child restraint systems
Only child restraint systems that meet the follow-
ing UNECE standards are permitted for use in the
vehicle:
R
UN-R44
R
UN-R129
120
Children in the vehicle – Suitable child restraint systems for the transport of children
F247 0074 02
Identication on the child restraint system
The following information, e.g., is available on the
approval label on the child restraint system:
R
Approval category
R
Child weight group
R
Authorisation number
R
Child restraint size class
Approval categories in accordance with UN-R44
Example of an approval label
R
Universal: child restraint systems in the "Uni-
versal" category are approved for installation
in vehicles. They can be used, in accordance
with overviews of the suitability of seats for
securing child restraint systems, on seats
labelled U, UF or IUF.
The identication IUF refers to ISOFIX child
restraint systems in the "Universal" category.
These child restraint systems must also be
secured using Top Tether or support points.
R
Semi-Universal: child restraint systems in the
"Semi-Universal" category may only be used if
the vehicle and vehicle seat are listed in the
child restraint system manufacturer's vehicle
model list.
R
Vehicle-specic: child restraint systems in the
"vehicle-specic" category may only be used if
the vehicle and vehicle seat are listed in the
child restraint system manufacturer's vehicle
model list.
Approval categories in accordance with UN-R129
Children in the vehicle – Suitable child restraint systems for the transport of children
121
F247 0074 02
Example of an approval label
R
i‑Sizechild restraint systems and booster seats
with backrest: suitable for attachment to i‑Size
mounting brackets. They can be used on the
seats marked i‑U.
Child restraint systems in this category can
also be attached to ISOFIX bars if approved by
the manufacturer of the child restraint system.
i‑Size booster seats with backrest can be used
on seats marked U if the seat is approved for
category B2/B3.
R
Belted child restraint systems and belted
booster seats without backrest of the
Univer-
salcategory: suitable for attachment to the
seats marked U.
R
Vehicle-specic child restraint systems (ISO-
FIX or belted attachment as well as child
booster seats with and without backrest): suit-
able for attachment to the seats marked i‑U or
U if this is approved by the child restraint sys-
tem manufacturer.
Observe the suitability of vehicle seats
R
Suitability of the seats for attaching ISOFIX
child restraint systems (/ page 125)
R
Suitability of seats for securing i‑Size child
restraint systems (/ page 127).
R
Suitability of seats for attaching belt-secured
child restraint systems (/ page 127)
Overview of recommended child restraint systems
%
Further information on the correct child
restraint system can be obtained at a quali-
ed specialist workshop. Mercedes-Benz rec-
ommends that you use a Mercedes-Benz
Service Centre for this purpose.
Securing with ISOFIX
Weight category 0+ (up to 13 kg and up to
approximately 15 months)
Type
1
BABY SAFE plus
(including base)
Size category E
Approval E1 04 301 146
Order number
2
B6 6 86 8224
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
Weight category I (9 to 18 kg and from approx-
imately 9 months to 4 years)
Type
1
DUO plus
Size category B1
Approval E1 04 301 133
122
Children in the vehicle – Suitable child restraint systems for the transport of children
F247 0074 02
Type
1
DUO plus
Order number
2
A 000 970 43 02
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
Securing with i-Size (R129 child restraint systems)
Weight up to 13 kg, height from 40 to 83 cm, and
aged up to about 15 months
Type
1
Baby Safe 3 i-Size
Size category R2
Approval E1*129R03/04*0060
*02
Order number A 000 970 68 02
Order number
FlexBase iSense
A 000 970 73 02
1 Manufacturer: Britax Römer.
Weight up to 18 kg, height from 61 to 105 cm,
and aged from about 3 months to 4 years
Type
1
Dualx 3 i-Size
Size category F2X/R2
Approval E1*129R03/04*0060
*02
Order number A000 970 93 02
Order number
FlexBase iSense
A000 970 73 02
1 Manufacturer: Britax Römer.
Weight from 15 to 36 kg, height from 100 to
150 cm, and aged from about 3.5 to 12 years
Type
1
KIDFIX M i-Size
Size category B2
Approval E1*129R03/04*0061
*02
Type
1
KIDFIX M i-Size
Order number A 000 970 89 02
1 Manufacturer: Britax Römer.
Weight from 15 to 36 kg, height from 100 to
150 cm, and aged from about 3.5 to 12 years
Type
1
AMG KIDFIX M i-Size
Size category B2
Approval E1*129R03/04*0061
*02
Order number A 000 970 91 02
1 Manufacturer: Britax Römer.
Children in the vehicle – Suitable child restraint systems for the transport of children
123
F247 0074 02
Securing with the vehicle seat belt
Weight category 0 (up to 10 kg and approximately
6 months) and weight category 0+ (up to 13 kg
and approximately 15 months)
Type
1
BABY SAFE plus II
Approval E1 04 301 146
Order number
2
A 000 970 38 02
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
R129 child restraint system (weight up to 13 kg,
height from 40 to 83 cm, and aged up to about
15 months)
Type
1
Baby Safe 3 i-Size
Size category R2
Approval E1*129R03/04*0060
*02
Order number A 000 970 68 02
1 Manufacturer: Britax Römer.
Weight category I (9 to 18 kg and from approx-
imately 9 months to 4 years)
Type
1
DUO plus
Approval E1 04 301 133
Order number
2
A 000 970 43 02
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
Weight category II/III (15 to 36 kg and from
approximately 3 to 12 years)
Type
1
KIDFIX XP
Approval E1 04 301 304
Order number
2
A 000 970 49 02
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
Weight category II/III (15 to 36 kg and from
approximately 3 to 12 years)
Type
1
AMG KIDFIX XP
Approval E1 04 301 304
Order number
2
A 000 970 33 02
1 Manufacturer: Britax Römer. 2 With colour code 9H95.
R129 child restraint systems (weight from 15 to
36 kg, height from 100 to 150 cm, and aged from
about 3.5 to 12 years)
Type
1
KIDFIX M i-Size
Size category B2
Approval E1*129R03/04*0061
*02
Order number A 000 970 89 02
1 Manufacturer: Britax Römer.
124
Children in the vehicle – Suitable child restraint systems for the transport of children
F247 0074 02
R129 child restraint systems (weight from 15 to
36 kg, height from 100 to 150 cm, and aged from
about 3.5 to 12 years)
Type
1
AMG KIDFIX M i-Size
Size category B2
Approval E1*129R03/04*0061
*02
Order number A 000 970 91 02
1 Manufacturer: Britax Römer.
Suitable seats for attaching child restraint sys-
tems
Overview of suitability of the seats for attaching
ISOFIX child restraint systems
ISOFIX is a standardised securing system for spe-
cially designed child restraint systems.
®
The symbol indicates seats suitable for
attaching an ISOFIX child restraint system
in accordance with UN R44 (/ page 120).
°
ISOFIX child restraint systems can also be
installed on seats with i‑Size markings
(/ page 127).
Attach only ISOFIX child restraint systems that
are approved in accordance with UN R44 as per
the following ISOFIX tables.
Carry cot
Size class –
Equipment
Le/right rear seat
F – ISO/L1 X
G – ISO/L2 X
X Not suitable for an ISOFIX
child restraint system in this
weight category and/or size
class.
Weight category 0 (up to 10 kg and up to approx.
6 months)
Size class –
Equipment
Le/right rear seat
E – ISO/R1 IL
IL Suitable for ISOFIX child
restraint systems according to
the table in "Overview of the
recommended child restraint
systems", or if the vehicle and
the seat are listed on the child
restraint system manufactur-
er's vehicle model list.
Weight category 0+ (up to 13 kg and up to
approx. 15 months)
Size class –
Equipment
Le/right
rear seat
E – ISO/R1 IL
D – ISO/R2, ISO/R2X IL
Children in the vehicle – Suitable seats for attaching child restraint systems
125
F247 0074 02
Size class –
Equipment
Le/right
rear seat
C – ISO/R3 IL (1)
IL Suitable for ISOFIX child restraint systems
according to the table in "Overview of the
recommended child restraint systems", or if
the vehicle and the seat are listed on the
child restraint system manufacturer's vehicle
model list.
(1) When using a child restraint system of
size class (ISO/R3), move the front seat into
the highest position. Make sure that the seat
backrest of the front seat does not rest
against the child restraint system.
Weight category 1 (9–18 kg and approx. 9 months
to 4 years)
Size class –
Equipment
Le/right
rear seat
D – ISO/R2, ISO/R2X IL
C – ISO/R3 IL (1)
B – ISO/F2 IUF
B1 – ISO/F2X IUF
Size class –
Equipment
Le/right
rear seat
A – ISO/F3 IUF
IL Suitable for ISOFIX child restraint systems
according to the table in "Overview of the rec-
ommended child restraint systems", or if the
vehicle and the seat are listed on the child
restraint system manufacturer's vehicle
model list.
IUF Suitable for forward-facing ISOFIX child
restraint systems of the "Universal" category
in this weight category.
(1) When using a child restraint system of
size class (ISO/R3), move the front seat into
the highest position. Make sure that the seat
backrest of the front seat does not rest
against the child restraint system.
126
Children in the vehicle – Suitable seats for attaching child restraint systems
F247 0074 02
Overview of suitability of the seats for attaching
i‑Size child restraint systems
i‑Size is a standardised securing system for spe-
cially designed child restraint systems.
°
i‑Size child restraint systems can be
attached to a seat with the i‑Size marking
(/ page 120).
Child restraint systems that are approved
in accordance with the following i‑Size
table may be attached.
Le and right rear seat
i‑Size child restraint systems (ISO/R1,
ISO/R2, ISO/R2X, ISO/R3, ISO/F2,
ISO/F2X, ISO/F3, ISO/B2, ISO/B3)
i‑U
i-U Suitable for forward-facing and rearward-facing i-Size
child restraint systems in the "Universal" category.
Front passenger seat
i‑Size child restraint systems (ISO/R1,
ISO/R2, ISO/R2X, ISO/R3, ISO/F2,
ISO/F2X, ISO/F3, ISO/B2, ISO/B3)
X
X Not suitable for an i-Size child restraint system in the
"Universal" category.
Overview of the suitability of seats for attaching
belt-secured child restraint systems
Suitability of seats for attaching belt-secured child
restraint systems
Rear seats
Weight category 0: to
10 kg
Le/right rear seat U, L
Centre rear seat
1
U, L
Weight category 0+:
to 13 kg
Le/right rear seat U, L
Centre rear seat
1
U, L
Weight category I: 9
to 18 kg
Le/right rear seat U, L
Centre rear seat
1
U, L
Weight category II: 15
to 25 kg
Le/right rear seat U, L
Centre rear seat
1
U, L
Weight category III:
22 to 36 kg
Le/right rear seat U, L
Centre rear seat
1
U, L
1 Child restraint systems with a
supporting bracket are not suit-
able for this seat.
Children in the vehicle – Suitable seats for attaching child restraint systems
127
F247 0074 02
U Suitable for child restraint
systems of the "Universal" cate-
gory in this weight category.
L Suitable for semi-universal
child restraint systems accord-
ing to the table in "Recommen-
ded child restraint systems", or
if the vehicle and the seat are
listed in the child restraint sys-
tem manufacturer's vehicle
model list.
Notes on child restraint systems on the front
passenger seat
R
If it is absolutely necessary for you to t a
child restraint system to the front passenger
seat, be sure to observe the information on
child restraint systems on the front passenger
seat (/ page 118).
R
Observe the specic instructions for the rear-
ward-facing and forward-facing child restraint
systems. If the front passenger seat is occu-
pied, ensure, both before and during the jour-
ney, that the status of the front passenger air-
bag is correct for the current situation
(/ page 101).
Front passenger seat
Weight category 0: to
10 kg
Front passenger air-
bag enabled
1
X
Front passenger air-
bag disabled
1, 2
U, L
Weight category 0+:
to 13 kg
Front passenger air-
bag enabled
1
X
Front passenger air-
bag disabled
1, 2
U, L
Weight category I: 9
to 18 kg
Front passenger air-
bag enabled
1
UF, L
Front passenger air-
bag disabled
1, 2
U, L
Weight category II: 15
to 25 kg
Front passenger air-
bag enabled
1
UF, L
Front passenger air-
bag disabled
1, 2
U, L
Weight category III:
22 to 36 kg
Front passenger air-
bag enabled
1
UF, L
Front passenger air-
bag disabled
1, 2
U, L
128
Children in the vehicle – Suitable seats for attaching child restraint systems
F247 0074 02
1 Adjust the seat cushion incli-
nation so that the front edge of
the seat cushion is in the high-
est position and the rear edge
of the seat cushion is in the low-
est position.
2 The vehicle is equipped with
automatic front passenger air-
bag shuto. The PASSENGER
AIR BAG OFF indicator lamp
must be lit.
X Not suitable for children in
this weight category.
U Suitable for child restraint
systems of the "Universal" cate-
gory in this weight category.
L Suitable for semi-universal
child restraint systems accord-
ing to the table in "Recommen-
ded child restraint systems", or
if the vehicle and the seat are
listed in the child restraint sys-
tem manufacturer's vehicle
model list.
UF Suitable for forward-facing
child restraint systems of the
"Universal" category in this
weight category.
Securing the child restraint system
Adjusting the seat correctly
When tting a child restraint system on the le or
right rear seat, always observe the following:
#
Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
If the head restraint of the child restraint system
cannot be fully extended when it is installed in the
vehicle, this will result in restrictions on the maxi-
mum size setting for certain child restraint sys-
tems. Observe the child restraint system manu-
facturer's installation instructions.
%
Contact with the roof when the head restraint
is fully extended and locked in place will not
result in any restrictions on use.
®° When tting an ISOFIX/LATCH or
i‑Size child restraint system, also observe the fol-
lowing:
#
When using a rearward-facing child restraint
system on a rear seat: adjust the front seat so
that it does not touch the child restraint sys-
tem.
#
When using a forward-facing child restraint
system with integrated child seat belt: adjust
the head restraint of the respective seat so
that it does not push the child restraint system
forwards. If necessary, the respective head
restraint can be removed. In addition, the
backrest of the child restraint system must lie
as at as possible against the backrest of the
Children in the vehicle – Securing the child restraint system
129
F247 0074 02
vehicle seat. Aer the child restraint system
has been removed, replace the vehicle head
restraint immediately and adjust correctly.
#
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be tted facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
#
Adjust the vehicle head restraints so that the
child restraint system is not put under strain
by the head restraint.
7 When tting a belt-secured child restraint
system, also observe the following:
#
When using a rearward-facing child restraint
system on a rear seat: adjust the front seat so
that it does not touch the child restraint sys-
tem.
#
When using a forward-facing child restraint
system with integrated child seat belt: adjust
the head restraint of the respective seat so
that it does not push the child restraint system
forwards. If necessary, the respective head
restraint can be removed. In addition, the
backrest of the child restraint system must lie
as at as possible against the backrest of the
vehicle seat. Aer the child restraint system
has been removed, replace the vehicle head
restraint immediately and adjust correctly.
#
The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the rear seat.
#
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be tted facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
#
Adjust the vehicle head restraints so that the
child restraint system is not put under strain
by the head restraint.
#
Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
7 Depending on the vehicle equipment,
always observe the following when tting a belt-
secured child restraint system on the front
passenger seat:
#
Observe the notes on rearward-facing and
forward-facing child restraint systems on the
front passenger seat (/ page 118).
#
When using a forward-facing child restraint
system integrated child seat belt: remove the
head restraint from the respective seat, if pos-
sible. Aer the child restraint system has been
removed, immediately replace the head
restraint and adjust correctly.
#
The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the front
passenger seat.
#
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be tted facing the wrong
direction.
130
Children in the vehicle – Securing the child restraint system
F247 0074 02
#
Adjust the vehicle head restraints so that the
child restraint system is not put under strain
by the head restraint.
#
Never place objects (e.g. cushions) under or
behind the child restraint system.
#
Set the front passenger seat as far back as
possible and move the seat into the highest
position if possible. Always make sure that the
shoulder belt strap is correctly routed from
the seat belt outlet of the vehicle to the shoul-
der belt guide on the child restraint system.
The shoulder belt strap must be routed for-
wards from the seat belt outlet and, where
possible, downwards to the child restraint sys-
tem.
#
Fully retract the seat cushion length adjust-
ment.
#
Adjust the seat cushion inclination so that the
front edge of the seat cushion is in the highest
position and the rear edge of the seat cushion
is in the lowest position.
#
Set the seat backrest to the most vertical
position possible.
Fitting an ISOFIX or i-Size child restraint system
&
WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest may fold forwards, even while the vehicle
is in motion.
R
As a result, the vehicle occupant will be
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
R
Objects or loads in the boot or load com-
partment cannot be restrained by the seat
backrest.
#
Make sure that the rear bench seat, the
rear seat and the seat backrest are
engaged before every trip.
Vehicles without a sliding rear bench seat: if the
rear seat backrest is not engaged and locked, the
red lock verication indicator will be visible.
Vehicles with a sliding rear bench seat: if the
centre seat backrest is not engaged and locked,
the red lock verication indicator will be visible.
The outer seat rows lock automatically if they are
not in the folded down position.
&
WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee-
ded.
Too much load may be placed on the ISOFIX
or i‑Size child restraint systems and the child
may not be restrained correctly in the event of
an accident, for example.
#
If the child is secured in an ISOFIX or i-
Size child restraint system with integra-
ted seat belts, the total mass of the child
and child restraint system must not
exceed 33 kg.
Always observe the information on the mass of
the child restraint system:
R
in the installation and operating instructions of
the manufacturer of the child restraint system
Children in the vehicle – Securing the child restraint system
131
F247 0074 02
R
on a label on the child restraint system, if
present
Regularly check that the permitted total mass of
the child and child restraint system is still being
adhered to.
When tting a child restraint system, also always
observe the following:
O
Always observe the area of use and the suita-
bility of the seats for mounting a child
restraint system.
® ISOFIX mounting brackets
(/ page 125).
or
° i‑Size mounting brackets (/ page 127)
1
ISOFIX mounting bracket
2
i‑Size mounting brackets
#
Always be sure to check before every journey
that the ISOFIX child restraint system or the
i‑Size child restraint system is correctly locked
in place in both on-board mounting brackets.
*
NOTE Damage to the seat belt for the
centre seat during installation of the child
restraint system
#
Make sure that the seat belt is not trap-
ped.
#
Attach the ISOFIX or i‑Size child restraint sys-
tem to both mounting brackets in the vehicle.
Fastening a Top Tether
&
WARNING Risk of injury or death if the
rear seat backrests are not locked aer
Top Tether belts are tted
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
#
Always lock rear seat backrests aer t-
ting Top Tether belts.
132
Children in the vehicle – Securing the child restraint system
F247 0074 02
#
Observe the lock verication indicator.
Vehicles without movable rear bench seats: if a
seat backrest in the rear passenger compartment
is not engaged and locked in place, the red lock
verication indicator will be visible.
Vehicles with movable rear bench seats: if the
centre seat backrest in the rear passenger com-
partment is not engaged and locked in place, the
red lock verication indicator will be visible. The
outer seat backrests lock automatically when they
are not folded down.
¯ If the child restraint system is equipped with
a Top Tether belt:
The risk of injury may be reduced by Top Tether.
The Top Tether belt enables an additional connec-
tion between the child restraint system attached
with ISOFIX or i‑Size and the vehicle.
Vehicles with adjustable head restraints:
#
If necessary, slide the head restraint upwards
(/ page 177).
#
Guide Top Tether belt 3 under the head
restraint between the two head restraint bars.
Vehicles without adjustable head restraints:
#
Top Tether belt with one seat belt strap: guide
Top Tether belt 3 over the centre of the head
restraint.
or
#
Top Tether belt with two seat belt straps: guide
one Top Tether belt 3 past the head restraint
on the right and le sides respectively.
All vehicles:
#
Fit the ISOFIX or i‑Size child restraint system
with Top Tether. In doing so, comply with the
child restraint system manufacturer's installa-
tion instructions.
#
Hook Top Tether hook 2 into Top Tether
anchorage
1 without twisting.
#
Tension Top Tether belt 3. In doing so, com-
ply with the child restraint system manufactur-
er's installation instructions.
Vehicles with adjustable head restraints:
Children in the vehicle – Securing the child restraint system
133
F247 0074 02
#
If necessary, slide the head restraint down-
wards (/ page 177). Make sure that you do
not interfere with the correct routing of Top
Tether belt
3.
Securing the child restraint system with the seat
belt
&
WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest may fold forwards, even while the vehicle
is in motion.
R
As a result, the vehicle occupant will be
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
R
Objects or loads in the boot or load com-
partment cannot be restrained by the seat
backrest.
#
Make sure that the rear bench seat, the
rear seat and the seat backrest are
engaged before every trip.
Vehicles without a sliding rear bench seat: if the
rear seat backrest is not engaged and locked, the
red lock verication indicator will be visible.
Vehicles with a sliding rear bench seat: if the
centre seat backrest is not engaged and locked,
the red lock verication indicator will be visible.
The outer seat rows lock automatically if they are
not in the folded down position.
#
For a child restraint system of the category
"Universal" or "Semi-Universal" ensure that
this is approved for the vehicle seat.
#
Fit the child restraint system.
The entire base of the child restraint system
must always rest on the sitting surface of the
seat.
#
Always make sure that the shoulder belt strap
is correctly routed from the seat belt outlet of
the vehicle to the shoulder belt guide on the
child restraint system.
The shoulder belt strap must be routed for-
wards from the seat belt outlet and, where
possible, downwards to the child restraint sys-
tem.
#
When tting on the rear seat: also secure Top
Tether to the front passenger seat, if present.
#
When tting on the front passenger seat: if
necessary, adjust the seat belt outlet as
appropriate.
134
Children in the vehicle – Securing the child restraint system
F247 0074 02
#
Press the lever in direction 1 (activate) or 2
(deactivate).
#
Check the functionality of the child safety
lock.
Activating and deactivating the child safety lock
for the rear side windows
&
WARNING Risk of accident– and injury
due to children le unattended in the vehi-
cle
When children are le unattended in the vehi-
cle, they can be expected in particular to
R
open doors, thereby endangering other
persons or road users.
R
get out and be struck by oncoming trac.
R
operate vehicle equipment and become
trapped, for example.
In addition, the children could also set the
vehicle in motion, for example by:
R
releasing the parking brake.
R
changing the drive range.
R
starting the vehicle.
#
Never leave children unattended in the
vehicle.
#
When leaving the vehicle, always take the
key with you and lock the vehicle.
#
Keep the key out of reach of children.
&
WARNING Risk of fatal injury due to expo-
sure to extreme heat or cold in the vehicle
If persons, particularly children, are subjected
to prolonged exposure to intense heat or cold,
there is a risk of severe injury or even death.
#
Never leave persons, particularly chil-
dren, unattended in the vehicle.
&
WARNING Risk of accident and injury due
to children le unattended in the vehicle
If children are travelling in the vehicle, they
could, in particular:
R
open doors, thereby endangering other
persons or road users.
R
get out and be struck by oncoming trac.
R
operate vehicle equipment and become
trapped, for example.
136
Children in the vehicle
F247 0074 02
#
Always activate the installed child safety
locks if children are travelling in the vehi-
cle.
#
Never leave children unattended in the
vehicle.
#
When leaving the vehicle, always take the
key with you and lock the vehicle.
Vehicles for the United Kingdom: observe the
important safety notes in the "Notes on the addi-
tional door lock" section.
There are child safety locks for the rear doors and
the rear side windows.
#
To activate/deactivate: press button 2.
The rear side window can be opened or closed
in the following cases:
R
Indicator lamp
1 is lit: via the switch on
the driver's door
R
Indicator lamp
1 is o: via the switch on
the corresponding rear door or driver's
door
Occupant presence reminder
Function of the occupant presence reminder
The occupant presence reminder can help to
remind you about a child who may have been for-
gotten in the rear compartment of the vehicle. It
activates and deactivates automatically when the
rear door is open for an extended period of time
and a child which the system presumes to be
present could enter or exit the vehicle.
When the vehicle is switched o, the
Do not
leave persons or animals in the vehicle
message
appears on the driver's display if the system was
already automatically activated.
You can permanently deactivate the function in
the multimedia system (/ page 138). When the
system is deactivated, the p indicator lamp in
the driver's display lights up.
Children in the vehicle
137
F247 0074 02
Activating or deactivating the occupant presence
reminder in the multimedia system
Multimedia system:
4
©
5
Settings
5
Vehicle
5
Occupant protection
#
Activate or deactivate the function.
138
Children in the vehicle
F247 0074 02

Related Topics

Popular Owner Manuals