Instrument Display and on-board computer -> Menus and submenus for Your Mercedes GLC Class SUV First Generation (2015-2021)

Instrument Display and on-board computer 257  
R
Engine Oil Level: engine oil level  
Adjusting the instrument lighting  
Menus and submenus  
Calling up functions on the service menu of  
the on-board computer  
Calling up displays on the Assistance menu  
On-board computer:  
On-board computer:  
4
4
DriveAssist  
Service  
#
The following displays are available on the Assis‐  
tance menu:  
To select a function: swipe upwards or  
downwards on the left-hand Touch Control.  
R
Assistant display  
#
Press the left-hand Touch Control.  
R
Attention level (/ page 238)  
Functions on the Servicemenu:  
R
Message memory (/ page 505)  
#
To switch between the displays: swipe  
upwards or downwards on the left-hand  
Touch Control.  
R
Tires:  
-
Restart the tire pressure loss warning  
system (/ page 466)  
-
Check the tire pressure with the tire pres‐  
sure monitor (/ page 464)  
#
Turn brightness control 1 up or down.  
The lighting of the Instrument Display and in  
the control elements of the vehicle interior is  
adjusted.  
-
Restart the tire pressure monitor  
(/ page 465)  
R
ASSYST PLUS: call up the service due date  
(/ page 420)  
R
Vehicles with a Widescreen Cockpit: Cool-  
ant: coolant temperature display  
258 Instrument Display and on-board computer  
Calling up displays on the Trip menu  
Status displays on the assistant display:  
R
Û ATTENTION ASSIST: deactivated  
Light lane markings: Active Lane Keeping  
Assist enabled  
On-board computer:  
R
4
Trip  
R
Green lane markings: Active Lane Keeping  
Assist active  
R
¸ Gray radar waves next to vehicle: Blind  
Spot Assist or Active Blind Spot Assist ena‐  
bled  
R
¸ Green radar waves next to vehicle:  
Blind Spot Assist or Active Blind Spot Assist  
active  
Active Distance Assist DISTRONIC displays  
(/ page 201)  
Trip computer (example)  
Total distance  
Driving time  
Average speed  
Average fuel consumption  
1
2
3
4
R
Standard display (example)  
Trip distance  
Total distance  
1
2
R
Active Lane Change Assist displays  
(/ page 209)  
% You can view information about the journey  
in the left-hand area of the Instrument Dis‐  
play.  
#
To select a display: swipe upwards or down‐  
wards on the left-hand Touch Control.  
Displays on the Trip menu:  
R
Standard display  
R
Range and current fuel consumption  
Instrument Display and on-board computer 259  
#
Calling up navigation instructions on the on-  
board computer  
If there is only a small amount of fuel left in  
the fuel tank, the display will show a vehicle  
being refueled instead of the range.  
ECO display(/ page 165)  
Trip computer From Start and From Reset  
Digital speedometer  
To select the function to be reset: swipe  
upwards or downwards on the left-hand  
Touch Control.  
Press the left-hand Touch Control.  
Select Yes .  
On-board computer:  
R
R
R
#
#
#
4
Navigation  
Press the left-hand Touch Control.  
If you press and hold the left-hand Touch Con‐  
trol, the values of the function will be reset  
immediately.  
Resetting values on the trip menu of the on-  
board computer  
On-board computer:  
4
Trip  
% The spelling of the main menu displayed may  
differ. Therefore, observe the menu overview  
for the Instrument Display (/ page 253).  
You can reset the values of the following func‐  
tions:  
Example: no change of direction announced  
1
2
3
4
Distance to the next change of direction  
Distance to the next destination  
Estimated arrival time at next destination  
Current road  
R
Trip distance  
R
Trip computer From Start and From Reset  
R
ECO display (/ page 165)  
260 Instrument Display and on-board computer  
R
R
R
R
R
If route guidance has already been activated,  
a query will appear asking whether you wish  
to end the current route guidance.  
Select Yes.  
Press the left-hand Touch Control.  
Route guidance will start.  
Road Not Mapped: the road is unknown, e.g.  
for newly built roads.  
No Route: no route could be calculated to  
#
#
the selected destination.  
Off Map: the map for the current location is  
not available.  
Area of Destination Reached: you have  
reached the area of the destination.  
O: you have reached the destination or an  
intermediate destination.  
Example: change of direction announced  
1
2
3
4
5
6
Distance to the change of direction  
Road to which the change of direction leads  
Change-of-direction symbol  
Recommended lane (white)  
Possible lane  
#
To exit the menu: press the back button on  
the left.  
Vehicles with the MBUX multimedia system:  
You can also start navigation to one of the  
recent destinations on the Navigation menu:  
#
Press the left-hand Touch Control.  
To select a destination: swipe upwards or  
downwards on the left-hand Touch Control.  
Press the left-hand Touch Control.  
Route guidance will start.  
Lane not recommended (dark gray)  
#
Further possible displays on the Navigation  
menu:  
R
#
Direction of Travel: display of direction of  
travel and road currently being traveled on.  
R
New Route... or Calculating Route...: a new  
route is being calculated.  
Instrument Display and on-board computer 261  
#
Selecting radio stations using the on-board  
computer  
Operating media playback using the on-  
board computer  
To select a radio station: swipe upwards or  
downwards on the left-hand Touch Control.  
On-board computer:  
On-board computer:  
Selecting the frequency range or memory  
preset  
4
4
Radio  
Media  
#
Press the left-hand Touch Control.  
#
To select the frequency range/station  
preset: swipe upwards or downwards on the  
left-hand Touch Control.  
#
Press the left-hand Touch Control.  
1
2
3
4
1
2
3
4
Memory preset  
Channel name  
Name of track  
Name of artist  
Media source  
Track number and current track  
Name of artist  
Name of album  
#
To change tracks on an active media  
source: swipe upwards or downwards on the  
left-hand Touch Control.  
When you select a station from the memory pre‐  
sets, the preset will appear next to the station  
name. When you select a saved station in the  
frequency range, an asterisk will appear next to  
the station name.  
262 Instrument Display and on-board computer  
Changing a media source  
wards on the left-hand Touch Control to  
select the desired telephone number.  
Press the left-hand Touch Control.  
The telephone number will be dialed.  
and traffic conditions and operate the  
equipment with the vehicle stationary.  
#
Press the left-hand Touch Control.  
#
#
To select a media source: swipe upwards  
When using the phone, observe the legal  
requirements for the country in which you are  
currently driving.  
or downwards on the left-hand Touch Con‐  
trol.  
The following displays may appear instead of the  
telephone numbers dialed:  
#
Press the left-hand Touch Control.  
Requirements:  
R
Please Wait...: the application is starting. If a  
R
The mobile phone is connected to the multi‐  
media system.  
Bluetooth® connection to the mobile phone  
is not established, the menu for authorizing  
and connecting a mobile phone will be dis‐  
played on the multimedia system  
(/ page 369).  
Dialing telephone numbers using the on-  
board computer  
On-board computer:  
4
Phone  
&
WARNING Risk of distraction from infor‐  
mation systems and communications  
equipment  
The most recent telephone calls (dialed,  
received and missed calls) are displayed on the  
Phone menu.  
R
Updating data...: the call list is being upda‐  
ted.  
If you operate information and communica‐  
tion equipment integrated in the vehicle  
when driving, you will be distracted from the  
traffic situation. This could also cause you to  
lose control of the vehicle.  
R
Importing Contacts...: contacts are being  
#
To select an entry: swipe upwards or down‐  
wards on the left-hand Touch Control.  
Press the left-hand Touch Control.  
If there is only one telephone number  
saved to an entry: the telephone number  
will be selected.  
imported from the mobile phone or a storage  
medium.  
#
Accepting/rejecting an incoming call  
Vehicles with Head-up Display: when you  
receive a call, the Incoming Call message will  
appear on the Head-up Display.  
#
Only operate this equipment when the  
traffic situation permits.  
#
If you cannot be sure of this, stop the  
vehicle whilst paying attention to road  
#
If there are multiple telephone numbers  
saved to an entry: swipe upwards or down‐