Get Instrument Display and on-board computer -> Operating the on-board computer Guide for Mercedes GLC Class SUV First generation (2015-2021)

Instrument Display and on-board computer 253

R

Active Distance Assist DISTRONIC

3

4

Control panel for cruise control or Active

Distance Assist DISTRONIC

Control panel for MBUX multimedia system:

£ Voice Control System

ß Displays favorites

VOL: control knob, adjusts the volume or

switches the sound off 8 (press)

6 Makes/accepts a call

~ Rejects/ends a call

ò Calls up the home screen

Touch Control multimedia system

% Back button

#

Before opening the hood, allow the

engine to cool down.

In the event of a fire in the engine com‐

partment, keep the hood closed and

call the fire service.

(/ page 201)

NOTE Engine damage due to excessively

high engine speeds

*

The engine will be damaged if you drive with

the engine in the overrevving range.

Overview of the buttons on the steering

wheel

#

Do not drive with the engine in the over‐

revving range.

5

6

7

The fuel supply will be interrupted to protect the

engine when the red mark on the tachometer

(overrevving range) is reached.

During normal operating conditions, coolant

temperature display 4 may rise to the red

mark.

Operating the on-board computer

Mercedes-AMG vehicles: observe the notes in

the Supplement. Otherwise, you may fail to rec‐

ognize dangers.

&

WARNING Danger of burns when open‐

ing the hood

If you open the hood when the engine has

overheated or during a fire in the engine

compartment, you could come into contact

with hot gases or other escaping operating

fluids.

1

¤ Back/Home button (press and hold),

on-board computer

2

Touch Control, on-board computer

254 Instrument Display and on-board computer

R

DriveAssist

Trip

Navigation

Radio

Media

Phone

&

WARNING Risk of distraction from infor‐

mation systems and communications

equipment

If you operate information and communica‐

tion equipment integrated in the vehicle

when driving, you will be distracted from the

traffic situation. This could also cause you to

lose control of the vehicle.

Head-up Disp.

#

^RVehicles with an Instrument Display in

Only operate this equipment when the

traffic situation permits.

the Widescreen Cockpit: Designs

#

If you cannot be sure of this, stop the

The menus can be called up from the menu bar

on the multifunction display.

vehicle whilst paying attention to road

and traffic conditions and operate the

equipment with the vehicle stationary.

#

To call up the menu bar: press back button

on the left 1 until the menu bar is dis‐

The on-board computer is operated using left-

hand Touch Control 2 and the left-hand back/

home button 1.

When the on-board computer is being operated,

different acoustic signals will sound as operating

feedback, e.g. when the end of a list is reached

or when you are scrolling through a list.

played.

Observe the legal requirements for the country

in which you are currently driving when operat‐

ing the on-board computer.

% The on-board computer displays will appear

on the multifunction display (/ page 256).

%

Press the ò button to call up the menu

bar of the on-board computer.

The following menus are available:

R

Service

Instrument Display and on-board computer 255

Setting the design

Setting the area for additional values

On-board computer:

4

Designs

% This function is available only for vehicles

with a Widescreen Cockpit.

The following designs can be selected:

R

Classic

R

Sport

#

R

Progressive

To scroll in the menu bar: swipe left or

right on left-hand Touch Control 2.

To call up a menu or confirm a selection:

press left-hand Touch Control 2.

To scroll through displays or lists on the

menu: swipe upwards or downwards on left-

hand Touch Control 2.

#

To select a design: swipe upwards or down‐

wards on the left-hand Touch Control.

Press the left-hand Touch Control.

The Instrument Display will be shown in the

selected design.

G-meter (example)

1

2

Area for additional values

Index points

#

To select display content: swipe to the

right on the left-hand Touch Control.

#

To call up a submenu or confirm a selec‐

Swipe upwards or downwards on the left-

hand Touch Control to select display content.

When display content is selected, the area

for additional values 1 will briefly be high‐

lighted.

tion: press left-hand Touch Control 2.

To exit a submenu: press back button on

the left 1.

Index points 2 will display the selected list

item.

Instrument Display and on-board computer -> Operating the on-board computer for Your Mercedes GLC Class SUV First generation (2015-2021)

Related Topics

Instrument Display and on-board computer