Technical data -> Operating fluids for Your Mercedes GLC Class SUV First Generation (2015-2021)

496 Technical data  
R
MB-Approval (e.g. MB-Approval 229.51)  
Operating fluids  
Notes on operating fluids  
ENVIRONMENTAL NOTE Environmental  
pollution caused by environmentally irre‐  
sponsible disposal  
+
Further information on approved operating fluids  
is available at the following locations:  
Mercedes-AMG vehicles: be sure to observe  
the notes in the Supplement. Otherwise, you  
may fail to recognize dangers.  
#
R
In the Mercedes-Benz Specifications for  
Operating Fluids by entering the designation  
Dispose of operating fluids in an envi‐  
ronmentally responsible manner.  
-
Operating fluids include the following:  
&
WARNING Risk of injury from operating  
fluids harmful to your health  
-
In the Mercedes-Benz BeVo app  
R
R
R
R
R
R
Fuels  
Lubricants  
Coolant  
Brake fluid  
Windshield washer fluid  
Climate control system refrigerant  
R
At a qualified specialist workshop  
Operating fluids may be poisonous and harm‐  
ful to your health.  
&
WARNING Risk of fire or explosion from  
fuel  
#
Observe the text on the original con‐  
tainers when using, storing or disposing  
of operating fluids.  
Fuels are highly flammable.  
#
Fire, open flames, smoking and creation  
of sparks must be avoided.  
Switch off the ignition and, if available,  
the stationary heater, before and while  
refueling the vehicle.  
#
Always store operating fluids sealed in  
their original containers.  
Only use products approved by Mercedes-Benz.  
Damage caused by the use of products that have  
not been approved is not covered by the  
#
#
Always keep children away from operat‐  
ing fluids.  
Mercedes-Benz warranty or goodwill gestures.  
You can identify operating fluids approved by  
Mercedes-Benz by the following inscriptions on  
the container:  
&
WARNING Risk of injury from fuels  
Fuels are poisonous and hazardous to your  
health.  
R
MB-Freigabe (e.g. MB-Freigabe 229.51)  
Technical data 497  
Tank content and fuel reserve  
Fuel  
#
Do not swallow fuel or let it come into  
contact with skin, eyes or clothing.  
Do not inhale fuel vapor.  
Keep children away from fuel.  
Keep doors and windows closed during  
the refueling process.  
Information on additives in gasoline  
Observe the notes on operating fluids  
(/ page 496).  
Capacity  
Model  
#
#
#
Total capacity  
17.4 gal (66.0 liters)  
Of which reserve  
1.8 gal (7.0 liters)  
All models  
Model  
NOTE Damage from use of unsuitable  
*
additives  
Even small amounts of the wrong additive  
may lead to malfunctions occurring.  
If you or other people come into contact with  
fuel, observe the following:  
All models  
#
#
Only add cleaning additives recommen‐  
Immediately rinse fuel off your skin with  
Engine oil  
ded by Mercedes-Benz to the fuel.  
soap and water.  
Notes on engine oil  
#
If fuel comes into contact with your  
Mercedes-Benz recommends that you use fuel  
brands that have additives.  
In some countries, the fuel available may not  
have sufficient additives. Residue could build up  
in the fuel injection system as a result. In this  
case, in consultation with an authorized  
Mercedes-Benz Center, the fuel may be mixed  
with the cleaning additive recommended by  
Mercedes-Benz. Be sure to observe the notes  
and mixing ratios specified on the container.  
Observe the notes on operating fluids  
eyes, immediately rinse them thor‐  
oughly with clean water. Seek medical  
attention immediately.  
(/ page 496).  
#
If you swallow fuel, seek medical atten‐  
tion immediately. Do not induce vomit‐  
ing.  
Change immediately out of clothing that  
has come into contact with fuel.  
#
498 Technical data  
R
Capacity  
Model  
at a qualified specialist workshop  
NOTE Engine damage caused by an  
incorrect oil filter, incorrect oil or addi‐  
tives  
*
Capacity  
Quality and capacity of engine oil  
MB-Freigabe or MB-Approval  
All models  
6.3 US qt (6.0 liters)  
#
Do not use engine oils or oil filters other  
than those which meet the specifica‐  
tions necessary for the prescribed  
service intervals.  
Do not alter the engine oil or oil filter in  
order to achieve longer change intervals  
than prescribed.  
Do not use additives.  
Have the engine oil changed after the  
prescribed intervals.  
Gasoline engines  
Engine oil specifica‐  
tions  
Notes on brake fluid  
All models  
229.51, 229.52,  
229.61  
Observe the notes on operating fluids  
(/ page 496).  
#
229.71*  
&
WARNING Risk of an accident due to  
vapor pockets forming in the brake sys‐  
tem  
#
#
* Recommended for lowest possible fuel con‐  
sumption (lowest SAE viscosity class in each  
case; observe possible restrictions of the  
approved SAE viscosity classes).  
To achieve the lowest possible fuel consumption,  
it is recommended to use the engine oil specifi‐  
cations marked in the table for the lowest SAE  
viscosity class. Possible restrictions of the  
approved SAE viscosity classes must be  
observed.  
The brake fluid constantly absorbs moisture  
from the air. This lowers the boiling point of  
the brake fluid. If the boiling point is too low,  
vapor pockets may form in the brake system  
when the brakes are applied hard.  
This causes the braking effect to be  
impaired.  
Mercedes-Benz recommends that you have the  
oil change carried out at a qualified specialist  
workshop.  
Further information on engine oil and oil filters is  
available at the following locations:  
R
#
In the Mercedes-Benz Specifications for  
Operating Fluids by entering the designation:  
Have the brake fluid renewed at the  
specified intervals.  
The following values refer to an oil change,  
including the oil filter.  
-
-
In the Mercedes-Benz BeVo app  
Technical data 499  
Have the brake fluid regularly replaced at a  
qualified specialist workshop.  
Only use brake fluid approved by Mercedes-Benz  
according to MB-Freigabe or MB-Approval 331.0.  
You can obtain further information on brake fluid  
in the following places:  
#
#
#
Allow the engine to cool down before  
adding antifreeze.  
Make sure that no antifreeze spills out  
next to the filler opening.  
Thoroughly clean off any antifreeze  
from component parts before starting  
the vehicle.  
NOTE Overheating at high outside tem‐  
*
peratures  
If an inappropriate coolant is used, the  
engine cooling system is not sufficiently pro‐  
tected against overheating and corrosion at  
high outside temperatures.  
R
in the Mercedes-Benz Specifications for  
Operating Fluids  
#
Always use coolant approved by  
Mercedes-Benz.  
Observe the instructions in the  
Mercedes-Benz Specifications for Oper‐  
ating Fluids 310.1.  
-
NOTE Damage caused by incorrect cool‐  
ant  
*
#
-
in the Mercedes-Benz BeVo App  
R
at a qualified specialist workshop  
#
Only add coolant that has been pre‐  
mixed with the required antifreeze pro‐  
tection.  
Have the coolant regularly replaced at a qualified  
specialist workshop.  
The proportion of corrosion inhibitor/antifreeze  
concentrate in the engine cooling system should  
be:  
Coolant  
Information on coolant is available at the fol‐  
lowing locations:  
Notes on coolant  
Observe the notes on operating fluids  
(/ page 496).  
R
In the Mercedes-Benz Specification for  
Operating Fluids 310.1  
R
a minimum of 50% (antifreeze protection  
down to approximately -35 °F (-37 °C))  
a maximum of 55% (antifreeze protection  
down to -49 °F (-45 °C))  
&
WARNING ‑ Risk of fire and injury from  
antifreeze  
-
-
In the Mercedes-Benz BeVo app  
R
If antifreeze comes into contact with hot  
component parts in the engine compart‐  
ment, it may ignite.  
R
At a qualified specialist workshop  
500 Technical data  
Coolant capacity  
For the correct mixing ratio, refer to the informa‐  
tion on the antifreeze container.  
Mix the washer fluid with the windshield washer  
fluid all year round.  
NOTE Damage to the exterior lighting  
*
due to unsuitable windshield washer fluid  
Coolant capacity  
Model  
Unsuitable windshield washer fluid may dam‐  
age the plastic surface of the exterior light‐  
ing.  
Capacity  
All models  
9.5 US qt (9.0 liters)  
Refrigerant  
#
Only use windshield washer fluid which  
is also suitable for use on plastic surfa‐  
ces, e.g. MB SummerFit or MB Winter‐  
Fit.  
Notes on refrigerant  
Observe the notes on operating fluids  
(/ page 496).  
Notes on windshield washer fluid  
Observe the notes on operating fluids  
(/ page 496).  
NOTE Damage due to incorrect refriger‐  
*
NOTE Blocked spray nozzles caused by  
*
&
WARNING ‑ Risk of fire and injury from  
ant  
mixing windshield washer fluids  
windshield washer concentrate  
If a non-approved refrigerant is used, the cli‐  
mate control system may be damaged.  
#
Do not mix MB SummerFit and MB Win‐  
terFit with other windshield washer flu‐  
ids.  
Windshield washer concentrate is highly  
flammable. It could ignite if it comes into  
contact with hot engine component parts or  
the exhaust system.  
#
Only use the refrigerant R‑134a  
Do not use distilled or de-ionized water as the fill  
level sensor may be triggered erroneously.  
Recommended windshield washer fluid:  
NOTE Damage to the climate control  
system due to incorrect refrigerant com‐  
pressor oil  
*
#
Make sure that no windshield washer  
concentrate spills out next to the filler  
opening.  
R
Above freezing point: e.g. MB SummerFit  
Below freezing point: e.g. MB WinterFit  
#
Only use refrigerant compressor oil that  
has been approved by Mercedes-Benz.  
R
Technical data 501  
3
4
5
Applicable standards  
PAG oil part number  
Refrigerant type  
#
Vehicle data  
Vehicle dimensions  
Do not mix the approved refrigerant  
compressor oil with a different refriger‐  
ant compressor oil.  
The heights specified may vary as a result of the  
following factors:  
Symbols 1 warn of the following:  
R
Work on the climate control system may be car‐  
ried out only by a qualified specialist workshop.  
All applicable regulations, as well as SAE stand‐  
ard J639, must be adhered to.  
The instruction label on the climate control sys‐  
tem for the refrigerant type and the refrigerant  
compressor oil is located on the inside of the  
hood.  
Possible dangers  
Having service work carried out at a qualified  
specialist workshop  
R
R
R
R
Tires  
Load  
R
Condition of the suspension  
Optional equipment  
Refrigerant filling capacity  
Filling capacity for refrigerant and PAG oil  
Model  
Refrigerant  
All models  
22.2 ± 0.4 oz  
(630 ± 10 g)  
Model  
PAG oil  
All models  
2.8 ± 0.4 oz  
(80 ± 10 g)  
1
2
Hazard and service warning symbols  
Refrigerant filling capacity