Get General notes -> Declarations of conformity and notes on driving in different countries Guide for Mercedes GLE SUV Fourth Generation (2020-2026)

Observe the following points when assembling

the licence plate on the front licence plate

holder:

Assemble the licence plate directly on

the licence plate holder without advertis-

ing media or other holders.

Assemble the licence plate so that it

does not protrude above or to the side of

the licence plate adapter.

Declarations of conformity and notes on driving

in dierent countries

Electromagnetic compatibility

The electromagnetic compatibility of the vehicle

components has been checked and certied

according to the currently valid version of Regula-

tion UN-R 10.

Country-specic information for regulatory radio

components

Notes when crossing national borders

You must observe the radio regulatory provisions

for the country in which you are currently driving

when operating the vehicle.

Wireless vehicle components

Only for EU and EFTA countries and countries

that recognize the EU manufacturer's declaration

of conformity:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the wireless components

ensure that all wireless components installed in

the vehicle comply with Directive 2014/53/EU.

The full texts of the EU declarations of conformity

are available at the following web address:

ets/

ece-row/baix/cars/certicates-of-conformity/

en_GB/

You can obtain further information from a

Mercedes-Benz service centre.

For Israel only:

It is prohibited to make any change to a vehicle-

installed radio component that could aect the

General notes

F167 0057 02

wireless specications of the device, including

soware changes, replacement of the original

antenna, or adding the option to connect the

device to an external antenna, without rst obtain-

ing approval from the Communica-tions Ministry,

because of concern about wireless interference.

For the United Kingdom only:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the radio components

declare that all radio equipment installed in the

vehicle is in compliance with the relevant statu-

tory requirements. The full texts of the declara-

tions of conformity are available at the following

web address:

ets/

ece-row/baix/cars/certicates-of-conformity/

en_GB/

For Brazil only:

Note on two-way radio systems in the vehicle:

These systems are not protected against harmful

interference and must not cause interference in

properly approved systems.

For Jamaica only:

All wireless vehicle components have received

type approval from the SMA.

For Nigeria only:

Connection and use of the radio communications

equipment in this vehicle is permitted by the

Nigerian Communications Commission

General notes

F167 0057 02

For countries of the Eurasian Economic Union

only:

The manufacturers of the wireless components

installed in the vehicle hereby declare that all

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

For Ukraine only:

The manufacturers of the wireless components

installed in the vehicle hereby declare that the

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

Jack

Only for EU and EFTA countries and countries that

recognize the EU manufacturer's Declaration of

Conformity:

CE Declaration of Conformity

Copy and translation of the original Declaration of

Conformity:

EC Declaration of Conformity

The signatory, as a representative

Manufacturer:

BRANO a.s.

747 41 Hradec nad Moravicí, Opavská 1000,

Czech Republic

ID No.: 64-387-5933

VAT Reg. No.: CZ64-387-5933

declares, as our sole responsibility, that the prod-

uct:

2. a)

Description:

Jack

Type, number:

A) A 164 580 02 18, A 166 580 01 18

B) A 240 580 00 18

C) A 639 580 02 18

D) A 639 580 03 18

E) A 910 580 00 00

F) A 247 580 00 00, A 293 580 00 00

G) A 247 580 01 00, A 293 580 01 00

H) A 247 580 02 00, A 293 580 02 00

Manufacture year: 2022

Fulls all relevant conditions

Directive No. 2006/42/EC

General notes

F167 0057 02

Description and intended use:

The sole intended use of the jack is raising the

specied vehicle in accordance with the operating

instructions axed to the jack.

Reference data of the harmonised standards or

specications

ISO 4063, EN ISO 14341-A, AS 2693, DBL

8230.10, DBL 7382.20, DBL 7392.10, DBL

8451.15, MBN 10435,

The technical documentation of the product is

stored at the manufacturer's plant. Representa-

tive for compilation of the technical documenta-

tion: Director of the Technical Department Brano

a.s.

Hradec nad Moravicí

City

14/03/2022

Date

Dipl. Engineer Michal Koberský

[Signature]

Director SBU-CJ

UKCA Declaration of Conformity

Copy and translation of the original Declaration of

Conformity:

UK Declaration of Conformity

The signatory, as a representative

Manufacturer:

BRANO a.s.

74741 Hradec nad Moravicí, Opavská 1000,

Czech Republic

ID No.: 64-387-5933

VAT Reg. No.: CZ64-387-5933

declares, as our sole responsibility, that the prod-

uct:

2. a)

Description:

Jack

Type, number:

A) A 164 580 02 18, A 166 580 01 18

B) A 240 580 00 18

C) A 639 580 02 18

D) A 639 580 03 18

E) A 910 580 00 00

F) A 247 580 00 00, A 293 580 00 00

G) A 247 580 02 00, A 293 580 02 00

Manufacture year: 2022

Fulls all relevant conditions

Supply of Machinery (Safety) Regulations 2008

Description and intended use:

The sole intended use of the jack is raising the

specied vehicle in accordance with the operating

instructions axed to the jack.

Reference data of the harmonised standards or

specications

ISO 4063, EN ISO 14341-A, DBL 8230.10, DBL

7382.20, DBL 7392.10, DBL 8451.15, MBN

10435,

General notes

F167 0057 02

The technical documentation of the product is

stored at the manufacturer's plant. Representa-

tive for compilation of the technical documenta-

tion: Director of the Technical Department Brano

a.s.

4. Hradec nad

Moravicí

04/07/2022

[Signature]

Dipl. Engineer

Michal Kober-

ský

City Date Director SBU-

TIREFIT kit

Only for EU and EFTA countries and countries that

recognize the EU manufacturer's Declaration of

Conformity:

CE Declaration of Conformity

Method 1

Copy and translation of the original Declaration of

Conformity:

EU Declaration of Conformity

Dunlop Tech GmbH

Oenbacher Landstr. 8

DE-63456 Hanau

Declare under our sole reponsibility that

Product Description: Electrical Air Pump

Serial Number: 000000001 to 999999999

Brand: Mercedes Benz

Model: DT 200146 (UW0851ve-IBK LK2), DT

200177 (UW0872-IBK-LK2P), 200156 (UW0867-

LK3)

Mercedes Benz Part Number: A 000 583 8205, A

000 583 8305, A 000 583 8405

is in conformity with all relevant provisions of the

directives:

Electromagnetic Compatibility 2014/30/EU

and complies with the following standards :

EN IEC 55014-1: 2021

EN IEC 55014-2: 2021

Including (Category I)

Dunlop Tech GmbH, Oenbacher Landstr. 8,

63456 Hanau, Germany authorized representative

for the complation of the technical documenta-

tion.

Factory name: UNIK WORLD IND. CO., LTD.

Address: NO. 110-2, Xiwei, Shanhua Dist., Tainan

City 74163, Taiwan (R.O.C.)

Name Dunlop Tech GmbH

Authorized Representative: Bernd Schuchhardt

Adress: Oenbacher Landstraße 8, 63456 Hanau,

Germany

15-07-2022 [B. Schuchhardt]

Signature

Declaration place: Germany

Method 2

Copy and translation of the original Declaration of

Conformity:

EC Declaration of Conformity

In accordance with EC Directive 2006/42/EC

We hereby declare that the product

100

General notes

F167 0057 02

Product designation: Daimler tyre ination com-

pressor

Type designation: 0867 , DT/UW 200056

MB part no.: A 000 583 5101

complies with the following relevant regulations:

2004/108/EC

Applied harmonised standards, in particular:

DIN EN 55014-1: 2012

DIN EN 55014-2: 2016

Manufacturer: Dunlop Tech GmbH

Address: Oenbacher Landstr. 8, 63456 Hanau

Authorised representative: IMS dept.

Date: October, 2019

Signature: i.A. [Signa-

ture]

i.A. [Signa-

ture]

IMS-AE IMS-AE-L

UKCA Declaration of Conformity

Copy and translation of the original Declaration of

Conformity:

Dunlop Tech GmbH

UKCA Declaration of Conformity

Product :

Product

Electrical Air pump

Model / Brand

DT 200146 (UW0851ve-IBK LK2), DT 200177

(UW0872), DT 200156 (UW0867-LK3)

Mercedes Benz Part Number:

A 000 583 8205, A 000 583 8305, A 000 583

8405

Authorized Representative (UK-GB):

Name:

Address:

Contact person:

This declaration is issued under the sole responsi-

bility of the mentioned Representative. The sub-

ject equipment under declaration is in conformity

with the UK-GB Regulation(s) below:

Statutory Instruments 2016 No. 1091

The Electromagnetic Compatibility Regulations

2016

Below designated standards were taken confer-

ring a presumption of conformity with the relevant

UK-GB regulations:

BS EN IEC 55014-1: 2021

BS EN IEC 55014-2: 2021

Authorized Representative responsible for making

this declaration:

Name: Dunlop Tech GmbH

Authorized Representative: Bernd Schuchhardt

Address: Oenbacher Landstraße 8, 63456

Hanau, Germany

15-07-2022 [B. Schuchhardt]

(Date) Signature

Diagnostics connection

The diagnostics connection is a technical inter-

face in the vehicle. It is used, for example, in the

context of repair and maintenance work or for

General notes

101

F167 0057 02

General notes -> Declarations of conformity and notes on driving in different countries for Your Mercedes GLE SUV Fourth Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals