2020-2026 Mercedes GLE SUV Maintenance and care -> ASSYST PLUS service interval display User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and care -> ASSYST PLUS service interval display for Your Mercedes GLE SUV Fourth Generation (2020-2026)

ASSYST PLUS service interval display
Function of the ASSYST PLUS service interval dis-
play
The ASSYST PLUS service interval display on the
driver's display provides information on the
remaining time or distance before the next
service due date.
You can hide this service display using the back
button G on the steering wheel.
Depending on how the vehicle is used, the
ASSYST PLUS service interval display may shorten
the service interval, e.g. in the following cases:
R
Mainly short-distance driving
R
When the engine is oen le idling for long
periods
R
In the event of frequent cold start phases
R
Vehicles with diesel particulate lters: in the
event of frequently interrupted regeneration of
the diesel particulate lter
Mercedes-Benz recommends avoiding such oper-
ating conditions.
You can obtain information concerning the servic-
ing of your vehicle from a qualied specialist
workshop, e.g. a Mercedes-Benz Service Centre.
Displaying the service due date
Driver's display:
4
Service
The next service due date is displayed.
#
To exit the display: press the back button
G on the steering wheel.
Information on regular maintenance work
*
NOTE Premature wear through failure to
observe service due dates
Maintenance work which is not carried out at
the right time or incompletely can lead to
increased wear and damage to the vehicle.
#
Adhere to the prescribed service inter-
vals.
#
Always have the prescribed maintenance
work carried out at a qualied specialist
workshop.
Notes on special service requirements
The prescribed service interval is based on nor-
mal operation of the vehicle. Have the mainte-
nance work carried out more oen than prescri-
bed if operating conditions are dicult or the
vehicle is subject to increased stress.
The ASSYST PLUS service interval display is only
an aid. It is the responsibility of the driver of the
vehicle to have maintenance work carried out
more oen than prescribed due to actual operat-
ing conditions and/or stresses.
Examples of arduous operating conditions:
R
Regular city driving with frequent intermediate
stops
R
Mainly short-distance driving
R
Frequent operation in mountainous terrain or
on poor road surfaces
634
Maintenance and care
F167 0057 02
R
When the engine is oen le idling for long
periods
R
Operation in particularly dusty conditions
and/or if air-recirculation mode is frequently
used
In these or similar operating conditions, have the
interior air lter, air lter, engine oil and oil lter,
for example, changed more frequently. Check the
tyres more frequently if the vehicle is operated
under increased stress. Further information can
be obtained at a qualied specialist workshop.
Battery disconnection periods
The ASSYST PLUS service interval display can cal-
culate the service due date only when the battery
is connected.
#
Display and note down the service due date
on the driver display before disconnecting the
battery (/ page 634).
Maintenance Management
Notes about Maintenance Management
If the Maintenance Management service is activa-
ted, relevant data is automatically transferred to
the Mercedes-Benz customer centre.
The customer centre transmits the data to the
service partner that you have entered on the
Mercedes me website at:
www.. You will then receive individ-
ual recommendations regarding the maintenance
of your vehicle.
%
The calculation of the optimal transmission
time of the maintenance request to the
service partner is subject to technical limita-
tions that may cause the maintenance recom-
mendation to be perceived as too early or too
late or not to be made at all. In this case, you
can conveniently arrange a maintenance
appointment with the customer centre via the
maintenance reminder in the multimedia sys-
tem.
%
Maintenance Management and the mainte-
nance reminder in the multimedia system are
not available in every country. Contact a
Mercedes-Benz service centre to nd out
whether this function is available in your coun-
try.
Data transferred when using Maintenance Man-
agement
When the service is activated, relevant data is
automatically transferred to determine the
required scope of maintenance as well as fault
detection and fault rectication.
Details on data transfer can be found in the data
protection information for the Mercedes me con-
nect services. These can be found at:
www. under "My Mercedes me
account", "Terms of use".
%
Maintenance Management and the mainte-
nance reminder in the multimedia system are
not available in every country.
Telediagnostics
Notes about Telediagnostics
%
This service is not available in all countries.
Maintenance and care
635
F167 0057 02

Related Topics

Popular Owner Manuals