MAINTENANCE
Bonnet
1
2
3
Pull the bonnet release handle (A) from the inside of
the car.
Opening the Bonnet
Push the lever (B) mounted on the bonnet in the arrow
direction to release the bonnet safety catch.
DO NOT drive when the bonnet is open or
retained only by the safety catch.
Raise the bonnet to open it.
Closing the Bonnet
Hold the bonnet using both hands and lower it, allowing it
to drop for the last 20～30 cm to fully close the bonnet.
By attempting to lift the front edge of the bonnet, check
if the lock is fully engaged after closing the bonnet. If it is
not fully engaged, please reopen the bonnet and repeat the
closing action.
Bonnet Open Alarm
If the bonnet is not fully engaged, when the START STOP
switch is in the ON position, the corresponding alarm icon
(refer to "Message Centre" in "Instruments and Controls"
chapter) will be shown on the message centre display. If it is
detected that the bonnet is not fully engaged while driving,
an audible warning will sound.
306
English 
