MAINTENANCE
Replacing Front Windscreen Wiper Blades
3
Press the button on the wiper arm (as illustrated),
and pull the upper end of the wiper blade outward to
disengage from the wiper arm.
4
5
6
Unhook the blade from the wiper arm and discard.
Locate the new wiper into the slot of the wiper arm.
Push the wiper blade towards the arm until the wiper
blade is engaged.
7
8
Check whether the wiper blade is fitted correctly to
the arm before positioning on the windscreen.
Operate the wiper stalk switch by pressing down again
and release, or set the Start/Stop Switch to ON, the
wiper will exit the service mode and automatically
return to its original position
1
With the bonnet in closed state, and within 20 seconds
of setting the START/STOP Switch to the OFF position,
operate the wiper stalk switch by pressing down and
release, the wipers will enter the 'service position' and
stop on the windscreen.
2
Lift the wiper arm away from the windscreen.
320
English 
