INSTRUCTIONS BEFORE USING THE VEHICLE
Charging Your Vehicle at Home
the vehicle, isolate the power supply first, then disconnect
the charging connector.
1
Before installing a home charging kit, it is essential that you
check with a qualified electrician that the infrastructure of
your property will support the charging equipment. Please
seek qualified advice that your current electrical supply
and circuits will support the requirements of the charging
equipment.
NEVER allow water or fluids to enter your charging
connector or vehicle charging port.
NEVER use damaged charging piles, equipment or sockets.
STOP charging immediately if you see anything unusual,
smell something burning or see sparks.
Charging Pile
ALWAYS follow the operating instructions supplied with
your charging equipment.
Various companies will supply and install charging piles to
your property and MG insists that only qualified reputable
suppliers and installers can be used for installation service.
Failure to have the correct equipment installed by a
qualified professional may result in overloaded circuits,
which could lead to a fire. .
Note: Charging stations and power infrastructure
must be installed and maintained by qualified
personnel from recognised installation companies,
using materials recommended by them.
Home Charging Guide
ONLY use certified equipment.
ONLY use qualified suppliers and installers.
When the high-voltage battery pack is fully charged,
disconnect the charging connector from the vehicle
charging port. If it is necessary to interrupt the charging of
33
English 
