BRIEF INTRODUCTION TO VEHICLE FUNCTIONS
IMPORTANT
switch twice towards the instrument panel will enter the
smart high beam system again. Within 2 seconds after
the system exits, quick pushing the high beam ON switch
once towards the instrument panel will enter the smart
high beam system again. The smart high beam system
automatically exits when the following conditions are
met. When the smart high beam system is enabled and
low beams automatically turn on, manually switch to high
beams. It can only be exited for not more than three times
in a start cycle otherwise this feature cannot be enabled
again in the current start cycle:
The Automatic High Beam function uses data from the
front view camera, always keep the windscreen clean
and free from residue in this area to maintain optimum
performance of this system. Any damage in this area
such as stone chips must be repaired at the earliest
convenience.
2
Turn Signal Lamp
•
When the smart high beam system is enabled and high
beams automatically turn on, manually switch to low
beams.
•
When the smart high beam system is enabled and high
beams automatically turn on, toggle the high beam
flashing switch.
75
English 
