Get QUICK REFERENCE Guide for Mini Cooper 2 Door Third Generation (2016-2023)

QUICK REFERENCE

Entering

Buttons for the central locking

system

Opening and closing

Buttons on the vehicle key

Overview

1

2

3

Unlocking

Buttons for the central locking system.

Locking

Unlocking the tailgate

Locking

4

Panic mode

Pressing the button locks the vehi-

cle if the front doors are closed.

Unlocking the vehicle

Unlocking

Press the button on the vehicle key.

Pressing the button unlocks the ve-

hicle.

Depending on the settings, either only the

driver's door or all vehicle access points are

unlocked.

Panic mode

You can trigger the alarm system if you find

yourself in a dangerous situation.

If only the driver's door is unlocked, press

the button on the vehicle key again to un-

lock the other vehicle access points.

Press the button on the vehicle key

and hold for at least 3 seconds.

Press and hold the button on the ve-

hicle key after unlocking.

To switch off the alarm: press any button.

The windows and the glass sunroof are

opened, as long as the button on the vehicle

key is pressed.

Comfort Access

Concept

Locking the vehicle

The vehicle can be accessed without operat-

ing the vehicle key.

Press the button on the vehicle key.

Carrying the vehicle key with you, e.g., in

your pants pocket, is sufficient.

All vehicle access points are locked.

16

Online Edition for Part no. 01405A02680 - II/20

Entering

QUICK REFERENCE

The vehicle automatically detects the vehi-

cle key when it is in close proximity or in

the car's interior.

–

Unlock the vehicle and then press the

button on the outside of the tailgate.

Press and hold the button on the

vehicle key for approx. 1 second.

Unlocking the vehicle

Depending on the setting, the doors may

also be unlocked.

Closing

Closing the tailgate manually.

Displays and control elements

In the vicinity of the steering

wheel

On the driver's or front passenger's door

handle, press the button.

Locking the vehicle

1

2

Low beams, fog lights

High beams, headlight flasher, turn sig-

nal

On the driver's or front passenger's door

handle, press the button.

3

4

Instrument cluster

Wiper system

Tailgate

Indicator/warning lights

Instrument cluster

unlocking

The indicator/warning lights can light up in

a variety of combinations and colors.

Several of the lights are checked for proper

functioning and light up temporarily when

drive-ready state is established.

17

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

Entering

Buttons on the Controller

Button Function

Driver's door

Press once: calls up the main

menu.

Press twice: open recently used

menus.

Opens the Communication menu.

Opens the Media/Radio menu.

1

2

Power windows

Exterior mirrors

Opens destination input menu

for navigation.

All around the selector lever

Opens navigation map.

Opens the previous display.

Opens the Options menu.

Voice activation

Activating the voice activation system

1

2

3

Selector lever

Controller with buttons

Parking brake

1.

Press the button on the steering

wheel.

2. Wait for the signal.

3. Say the command.

Central Information Display (CID)

Concept

The Central Information Display (CID) com-

bines the functions of a multitude of

switches. These functions can be operated

via the Controller.

This symbol indicates that the voice ac-

tivation system is active.

If no other commands are available, operate

the function via the Central Information

Display (CID).

Terminating the voice activation

system

Press the button on the steering

wheel or ›Cancel‹.

18

Online Edition for Part no. 01405A02680 - II/20

Set-up and use

QUICK REFERENCE

Set-up and use

Adjusting the exterior mirrors

Seats, mirrors, and steering

wheel

Manually adjustable seats

1

Adjusting

2

Selecting a mirror, Automatic Curb Mon-

itor

3

Folding in and out

1

2

3

4

Forward/backward

Thigh support

Height

Adjusting the steering wheel

In four directions

Backrest tilt

Adjusting the head restraint

Height

1. Fold the lever down.

2. Move the steering wheel to the prefer-

red height and angle to suit your seating

position.

–

To raise: push the head restraint up.

3. Fold the lever back up.

To lower: press the button, arrow 1, and

push the head restraint down.

19

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

Set-up and use

Entering the rear

1. Pull lever up to the stop.

Navigation destination entry

Entering a destination via address

State/province

1.

2.

"Navigation"

"Enter address"

3. "State/Province?"

4. Select the country from the list.

Entering the address

2. Fold backrest forward.

3. Push the seat forward.

The address can be entered in any order.

Example: entering the address via the town/

city

Original position

1. Push the seat back into the original po-

sition.

1. "City/Postal code?"

2. Enter the town/city.

The list is narrowed down further with

each entry.

2. Fold back the backrest to lock the seat.

3.

Select the symbol.

Infotainment

4. Select a town/city from the list.

5. If necessary, enter the street.

Radio

6. Select the street as you would the town/

city.

Control elements

7. If necessary, enter a house number.

8.

Select the symbol.

9. Select a house number or range of house

numbers from the list.

Starting destination guidance

"Start guidance"

If only the town/city was entered: destina-

tion guidance is started to the town/city

center.

1

2

3

4

5

Changing the waveband

Changing the entertainment source

Sound output on/off, volume

Changing the station/track

Programmable memory buttons

Pairing the mobile phone

After the mobile phone is paired once with

the vehicle, the mobile phone can be oper-

ated using the Central Information Display

20

Online Edition for Part no. 01405A02680 - II/20

Set-up and use

QUICK REFERENCE

(CID), the steering wheel buttons and spo-

ken instructions.

Via the Central Information Display (CID)

"Accept"

1.

"My MINI"

Via the button on the steering wheel

2. "System settings"

3. "Mobile devices"

4. "Connect new device"

Press the button.

Via the instrument cluster

Use the OK button on the steering wheel to

select: "Accept"

The vehicle's Bluetooth name is dis-

played on the Control Display.

5. Select the functions for which the mo-

bile phone is to be used.

Dialing a number

1. "Communication"

6. To perform additional steps on the mo-

bile phone, refer to the mobile phone

owner's manual: e.g., search for or con-

nect the Bluetooth device or a new de-

vice.

2. "Dial number"

3. Select the numbers individually.

4.

Select the symbol.

Establish the connection via the additional

phone:

The Bluetooth name of the vehicle ap-

pears on the mobile phone display. Se-

lect the Bluetooth name of the vehicle.

1. Press the button.

7. Depending on the mobile device, a con-

trol number is displayed or the control

number must be entered.

2. "Call via"

–

Compare the control number dis-

played on the Control Display with

the control number on the display of

the device.

Apple CarPlay preparation

Concept

CarPlay allows certain functions of a com-

patible Apple iPhone to be used via Siri

voice operation and the Central Information

Display (CID).

Confirm the control number on the

device and on the Control Display.

–

Enter and confirm the same control

number on the device and via the

Central Information Display (CID).

The device is connected and displayed

in the device list.

Functional requirements

–

Compatible iPhone.

The mobile phone is connected and will ap-

pear at the top of the list of mobile phones.

iPhone 5 or later with iOS 7.1 or later.

Corresponding mobile contract.

–

Using the phone

Accepting a call

Bluetooth, WLAN, and Siri voice opera-

tion are activated on the iPhone.

Incoming call can be accepted via the Cen-

tral Information Display (CID) or the button

on the steering wheel.

21

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

Set-up and use

Switching on Bluetooth and CarPlay

Via the Central Information Display (CID):

1.

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. Select the following settings:

–

"Bluetooth®"

"Apple CarPlay"

Pairing the iPhone with CarPlay

Pair iPhone via Bluetooth with the vehicle.

Select CarPlay as the function:

"Apple CarPlay"

The iPhone is connected to the vehicle and

displayed in the device list.

22

Online Edition for Part no. 01405A02680 - II/20

On the road

QUICK REFERENCE

On the road

Start/Stop button

Driving

Pressing the Start/Stop button

switches standby state on or

off.

Drive-ready state

General information

When drive-ready state is switched on, the

vehicle is operational.

Drive-ready state is switched

on when you depress the

brake pedal while pressing the Start/Stop

button.

All vehicle systems are ready for operation.

Most of the indicator/warning lights in the

instrument cluster light up for a varied

length of time.

Switching on drive-ready state

1. Close the driver's door.

2. Depress the brake pedal.

3. Press the Start/Stop button.

Drive-ready state is switched on.

Activated drive-ready state is the equiva-

lent of a running engine in conventional ve-

hicles. Deactivated drive-ready state is

equivalent to switching the engine off.

Displays

To save battery power when parking, switch

off drive-ready state and any unnecessary

electronic systems/power consumers.

READY indicates drive-ready

state.

Drive-ready state is switched off automati-

cally:

–

When you lock the vehicle while low

beams are switched on.

Drive-ready state in detail

Requirements

Driving is possible under the following con-

ditions:

If the charge state of the batteries is

low.

When opening or closing the driver

door, if the driver's safety belt is un-

buckled and the low beams are switched

off.

–

The high-voltage battery is sufficiently

charged.

–

The driver's door is closed.

Charging cable is detached.

–

While the driver's safety belt is unbuck-

led with driver's door open and low

beams off.

Driving away

1. Switch on drive-ready state.

After the driver's door is opened or closed

or the driver's safety belt is released, the

radio-ready state remains active.

2. Apply the brake and engage the selector

lever in position D or R.

23

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

On the road

Engaging N, D, R

3. Release the parking brake.

4. Depress the accelerator pedal to drive

off.

Accelerator pedal positions

Move the selector lever in the desired direc-

tion.

Engaging P

1

2

3

Deceleration

Coasting

Acceleration or constant speed: ePO-

WER

Engaging the gear

–

Interlock: the selector lever position P

can be exited only with drive-ready

state engaged.

Apply brake and press button P.

–

Shift lock: with the vehicle stationary,

press on the brake pedal before shifting

out of P or N; otherwise, the shift com-

mand will not be executed.

Parking brake

Setting

–

Shift lock: before shifting out of P, re-

move the charging cable from the vehi-

cle; otherwise, the shift command will

not be executed.

Pull the switch when the vehicle is

stationary.

The LED and indicator light light up.

Releasing

Press the switch while stepping on the

brake pedal or selector lever position P

is set.

The LED and indicator light go out.

The parking brake is released.

24

Online Edition for Part no. 01405A02680 - II/20

On the road

QUICK REFERENCE

Canada: roadside parking light

High beams, headlight flasher, turn

signal, roadside parking light

High beams, headlight flasher

To illuminate the vehicle on one side.

–

On: with the standby state switched off,

press the lever either up or down past

the resistance point for approx. 2 sec-

onds.

Push the lever forward or pull it backward.

–

High beams on, arrow 1.

–

Off: briefly press the lever to the resist-

ance point in the opposite direction.

The high beams light up when the low

beams are switched on.

–

High beams off/headlight flasher, ar-

row 2.

Lights and lighting

Light functions

Turn signal

Symbol

Function

Front fog lights.

Automatic headlight control.

Lights off.

Daytime running lights.

–

On: press the lever past the resistance

point.

Parking lights.

Low beams.

Off: lightly tap the lever to the resist-

ance point.

Off: press the lever past the resistance

point in the opposite direction.

Triple turn signal activation: lightly tap

the lever up or down.

Instrument lighting.

Brief signaling: press the lever to the re-

sistance point and hold it there for as

long as you want the turn signal to flash.

25

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

On the road

Rain sensor

Wiper system

Activating/deactivating

Switching the wipers on/off and brief

wipe

Switching on

To activate: press the lever up once from its

standard position, arrow 1.

To deactivate: press the lever back into the

standard position.

Press the lever up until the desired position

is reached.

–

Resting position of the wipers: posi-

tion 0.

Set interval or sensitivity of the rain

sensor

–

Rain sensor: position 1.

Normal wiper speed: position 2.

Fast wiper speed: position 3.

Brief wipe and switching off

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Press the lever down.

–

Switching off: press the lever down until

it reaches its standard position.

–

Brief wipe: press the lever down from

the standard position.

Pull the lever.

26

Online Edition for Part no. 01405A02680 - II/20

On the road

QUICK REFERENCE

Rain sensor

Canada: wiper system

Activating/deactivating

Switching the wipers on/off and brief

wipe

Switching on

Press the button on the wiper lever.

Set interval or sensitivity of the rain

sensor

Tap up the lever or press it past the resist-

ance point.

–

Normal wiper speed: tap up once.

Fast wiper speed: tap up twice or tap

once beyond the resistance point.

Brief wipe and switching off

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Press the lever down.

–

To switch off fast wipe: press down

twice.

To switch off normal wipe: press down

once.

Brief wipe: press down once.

Pull the lever.

27

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

On the road

Climate control

Charging the vehicle

Automatic climate control

Charging the vehicle

Charging socket flap

Button

Function

Temperature.

Air conditioning.

Maximum cooling.

AUTO program.

The charging socket flap is located on the

right side of the vehicle.

Always keep charging socket clean and un-

obstructed.

Recirculated-air mode.

Keep the charging socket flap closed when

the charging socket is not used.

Controls the air flow,

manual.

Connecting the charging cable

To connect, engage selector lever posi-

tion P, deactivate drive-ready state, and un-

Air distribution, manual.

Defrosts and defogs the

windows.

Rear window defroster.

28

Online Edition for Part no. 01405A02680 - II/20

On the road

QUICK REFERENCE

lock the vehicle. Set the parking brake, if

needed.

If necessary, clean the area between the

charging socket flap and charging socket,

for instance from snow, before removing it.

1. Tap on the charging socket flap, arrow.

The charging socket flap opens.

1. Unlock the vehicle with the vehicle key

if it is locked.

Charging cable is unlocked.

2. Press the release button on the handle,

arrow 1, and grasp the charging cable at

the gripping areas.

Charging process is interrupted.

2. Remove the charging socket lid, arrow.

3. Remove the charging cable from the

charging socket, arrow 2.

4. Put the charging socket lid back on.

5. Press on the charging socket flap until it

engages.

3. Remove the cover of the charging cable

plug, if needed.

6. Attach cover of the charging cable plug,

if needed.

4. Connect Level 1 charging cable to the

household socket or Level 2 charging

cable to the port on the charging station.

7. Disconnect Level 1 charging cable from

the household socket or Level 2 charg-

ing cable from the port on the charging

station as applicable.

5. Insert the appropriate charging cable

plug, and push it in until it engages.

When charging at a charging station, follow

the instructions at the charging station.

8. Stow the charging cable.

At a charging station, insert the perma-

nently installed charging cable in the

place provided for it.

Removing

When the charging process is active and

the vehicle is locked, the charging cable is

automatically locked. Unlock the vehicle be-

fore removing the cable.

When the charging process is completed,

the charging cable is automatically un-

locked.

29

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE

On the road

Wheels and tires

Breakdown assistance

MINI Roadside Assistance

Tire inflation pressure specifications

This service can be reached around the

clock in many countries.

1.

"MINI Connected"

2. "MINI Assist"

3. "MINI Roadside Assistance"

The contact to the MINI Roadside Assis-

tance is established.

A telephone number is displayed, if

needed. Select to dial the telephone

number on a connected mobile phone.

The tire inflation pressure values can be

found on the sign on the door pillar.

Checking the tire inflation pressure

Regularly check the tire inflation pressure

and correct it as needed:

–

At least twice a month.

Before embarking on an extended trip.

After correcting the tire inflation

pressure

Reinitialize the Flat Tire Monitor.

Reset the Tire Pressure Monitor.

Providing assistance

Hazard warning flashers

The button is located above the Control Dis-

play.

30

Online Edition for Part no. 01405A02680 - II/20

On the road

QUICK REFERENCE

31

Online Edition for Part no. 01405A02680 - II/20

QUICK REFERENCE for Your Mini Cooper 2 Door Third Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals