Get QUICK REFERENCE -> On the road Guide for Mini Cooper 2 Door Fourth Generation (2024-2026)

QUICK REFERENCE

On the road

Steptronic transmission

Driving

Engaging a selector lever position

Drive-ready state

Turning on the drive-ready state

1. Depress the brake pedal.

2.

Turn the Start/Stop button on the

switch cluster.

Turning off drive-ready state

After stopping the vehicle:

–

D is drive.

N Neutral.

1. Apply the brake and push the parking

brake button.

Reverse R.

With shift paddles: S is Sport program.

Without shift paddles: L LOW mode.

2.

On the switch cluster, turn the

Start/Stop button.

To prevent the vehicle from moving after

engaging drive or reverse, maintain pres-

sure on the brake pedal until you are ready

to drive off.

The READY indicator goes out and a

signal tone sounds.

The drive-ready state is switched off auto-

matically if the driver's seat belt is not

buckled when the driver's door is opened.

Only engage selector lever position R when

the vehicle is stationary.

Sport program: Shift characteristics are de-

signed for sportier driving.

Auto Start/Stop function

The Auto Start/Stop function switches the

engine off automatically while stationary to

save fuel. The engine starts automatically

under the following preconditions:

LOW mode: the engine braking effect is in-

creased and acceleration is quicker.

Engaging selector lever position P

Only push the parking brake button when

the vehicle is stationary.

–

By releasing the brake pedal.

When Automatic Hold is activated: step

on the accelerator pedal.

22

Online Edition for Part no. 01405B37A59 - II/24

On the road

QUICK REFERENCE

Light and view

Turn signal, high-beam headlights,

headlight flasher

Turn signal

To engage selector lever position

P and the parking brake, press the

parking brake button on the switch

cluster.

The parking brake is applied and the trans-

mission lock is engaged.

–

To flash the turn signal, push the turn

signal lever up or down past the resist-

ance point.

Parking brake

Setting the parking brake

–

For one-touch signaling: Lightly tap the

turn signal lever up or down.

To engage the parking brake, press

the parking brake button on the

switch cluster.

To flash the turn signal briefly: Push the

turn signal lever to the resistance point

and hold it there for as long as you wish

to indicate a turn.

The LED illuminates.

The parking brake is engaged and transmis-

sion lock is engaged.

High-beam headlights,

headlight flasher

Releasing the parking brake

Press the parking brake button with

selector lever position P engaged

and drive-ready state on.

The LED and the indicator light go out.

The parking brake is released.

Parking

Make sure the parking brake is engaged.

–

To turn on the high-beam headlights,

push the turn signal lever forward, ar-

row 1.

23

Online Edition for Part no. 01405B37A59 - II/24

QUICK REFERENCE

On the road

The high-beam headlights illuminate

when the low-beam headlights are

switched on.

Icon

Function

Left roadside parking light.

–

To turn off the high-beam headlights or

operate the headlight flasher, pull the

turn signal lever backward, arrow 2.

Right roadside parking light.

Lights and lighting

Window wiper system

Buttons on turn signal lever

Turning on window wiper system

Icon

Function

Exterior lighting menu.

Low-beam headlights.

Automatic headlight control.

Exterior lighting off.

To turn on the wiper system, push the wiper

lever upward to the desired position.

Position

Function

Position 0.

Position 1.

Position 2.

Position 3.

Rest position of wipers.

Rain sensor mode.

Normal wiper speed.

Fast wiper speed.

Functions via the Interaction Unit

Icon

Function

Automatic headlight control.

Low-beam headlights.

Exterior lighting off.

Automatic High Beam Assistant.

Parking lights.

24

Online Edition for Part no. 01405B37A59 - II/24

On the road

QUICK REFERENCE

Turning off the window wiper system

and flick wipe

Adjusting the rain sensor sensitivity

To adjust the sensitivity of the rain sensor,

turn the knurled wheel on the wiper lever.

To turn off the wipers or to activate flick

wiping, proceed as follows:

–

To turn off: Push the wiper lever down-

ward, arrow 1, until position 0 is

reached.

Cleaning the windshield

–

To flick wipe: Push the wiper lever

downward from position 0, arrow 1, and

push the wiper lever forward to position

0 or position 1, arrow 2.

The wiper lever returns to its initial po-

sition when released.

Activating/deactivating rain sensor

To clean the windshield, pull the wiper lever

back.

Rear wiper

Switching on the rear wiper

To activate the rain sensor: Push the wiper

lever upward from position 0, arrow 1, once.

To deactivate the rain sensor: Push the

wiper lever back to position 0.

To turn on the rear wiper, rotate the outer

switch on the wiper lever upward.

25

Online Edition for Part no. 01405B37A59 - II/24

QUICK REFERENCE

On the road

Switch posi- Function

tion

Icon

Function

Air distribution.

Position 0.

Position 1.

Rest position of the wiper.

Intermittent operation.

Air conditioning.

When reverse gear is

engaged, the system

switches to continuous op-

eration.

Maximum cooling.

Air recirculation mode.

Clean the rear window

To clean the rear window, turn the outer

switch on the wiper lever as follows:

Automatic recirculated-air

control.

–

In rest position: Turn the switch down-

ward, arrow 3. The switch returns to its

rest position when released.

Fresh air.

–

In intermittent operation: Turn the

switch further, arrow 2. The switch au-

tomatically returns to its interval posi-

tion when released.

SYNC program.

Seat heating.

Climate control

Steering wheel heating.

Climate control functions

Functions in the Climate menu

Buttons, automatic climate control

Icon

Function

Turn the climate control

system on/off.

Automatic program.

Temperature.

Air flow.

26

Online Edition for Part no. 01405B37A59 - II/24

On the road

QUICK REFERENCE

Icon

Function

Intermediate stop

Defrost function.

Refueling

Rear window defroster.

Fuel filler cap

1. To open the fuel filler flap, press on

the rear edge, arrow. The fuel filler flap

opens.

2. Open the fuel filler cap counterclock-

wise.

3. Place the fuel filler cap in the bracket on

the fuel filler flap.

27

Online Edition for Part no. 01405B37A59 - II/24

QUICK REFERENCE

On the road

Wheels and tires

Adding engine oil

General information

Tire pressure specifications

The tire pressure table contains all tire in-

flation pressure specifications for given tire

sizes at ambient temperature.

Safely park the vehicle and switch off drive-

ready state before adding engine oil.

Adding engine oil

1. Opening the hood.

After correcting the tire pressure

If vehicle is equipped with the Tire Pres-

sure Monitor, corrected tire pressures are

applied automatically. Make sure that the

correct tire settings have been made. When

using tires not listed in the tire inflation

pressure specifications on the Interaction

Unit, reset the Tire Pressure Monitor.

2. Open the lid counterclockwise.

If equipped with a flat tire monitor, reiniti-

alize the flat tire monitor.

Checking the tire pressure

Regularly check the tire inflation pressure

and correct it as needed:

3. Add engine oil.

4. Close the lid.

–

At least twice a month.

Before embarking on an extended trip.

Providing assistance

Electronic oil measurement

Functional requirements

Hazard warning system

A current measured value is available after

approx. 30 minutes of normal driving with

the combustion engine running.

Displaying the engine oil level

To bring up the engine oil level, go

through the menu as follows: Apps menu /

"Vehicle" / "Vehicle status" / "Engine oil

level".

The hazard warning system button is

located on the switch cluster.

The engine oil level is displayed.

28

Online Edition for Part no. 01405B37A59 - II/24

On the road

QUICK REFERENCE

MINI Connected

MINI Assistance

Contact MINI Assistance for information

and support for all aspects of the vehicle.

1. Go through the menu as follows: Apps

menu / "All" / "MINI Assist".

2. Select the desired service, as necessary.

A voice connection to the selected serv-

ice is established.

MINI Teleservices

Teleservices are services that help to main-

tain vehicle mobility.

Teleservices can comprise the following

services:

–

MINI Roadside Assistance.

MINI Accident Assistance.

Teleservice Call.

An authorized service center.

29

Online Edition for Part no. 01405B37A59 - II/24

QUICK REFERENCE -> On the road for Your Mini Cooper 2 Door Fourth Generation (2024-2026)

Related Topics

QUICK REFERENCE

NOTES

Popular Owner Manuals

Latest Owner Manuals