2010-2019 Nissan Juke SUV Technical information -> Recommended SAE viscosity number User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Technical information -> Recommended SAE viscosity number for Your Nissan Juke SUV First Generation (2010-2019)

For Thailand:  
10W-30 is preferable.  
If 10W-30 is not available, select the viscosity,  
from the chart, that is suitable for the outside  
temperature range.  
For Indonesia:  
0W-20 is preferable.  
If 0W-20 is not available, select the viscosity,  
from the chart, that is suitable for the outside  
temperature range.  
RECOMMENDED SAE VISCOSITY NUM-  
BER  
Gasoline engine oil  
For Mexico:  
10W-30 is preferable.  
5W-30 is also preferable and will improve fuel  
economy.  
If 10W-30 or 5W-30 is not available, select the  
viscosity, from the chart, that is suitable for the  
outside temperature range.  
STI0589  
STI0732  
STI0589  
Technical information 9-5  
Except for Mexico, Thailand and Indonesia:  
5W-30 is preferable.  
If 5W-30 is not available, select the viscosity,  
from the chart, that is suitable for the outside  
temperature range.  
AIR CONDITIONER SYSTEM REFRIGER-  
ANT AND LUBRICANT  
The air conditioner system of your vehicle must be  
charged with the refrigerant HFC-134a (R134a) and  
the lubricant NISSAN A/C System Oil Type R or the  
exact equivalents. Use of any other refrigerants or  
lubricants will cause severe damage, and you may  
need to replace your vehicle’s entire air conditioner  
system.  
The release of refrigerants into the atmosphere is  
prohibited in many countries and regions. The refrig-  
erant HFC-134a (R-134a) in your vehicle will not harm  
the Earth’s ozone layer. However, it may contribute in a  
small part to the global warming effect. NISSAN  
recommends that the refrigerant be appropriately  
recovered and recycled. Contact a NISSAN dealer  
when servicing the air conditioner system.  
STI0589  
9-6 Technical information  

Related Topics

Popular Owner Manuals