• Release the accelerator pedal before shifting
between R (Reverse) and D (Drive).
•
•
Always pull the cable straight out from
the front of the vehicle. Never pull on
the vehicle at an angle.
Pulling devices should be routed so
they do not touch any part of the sus-
pension, steering, brake or cooling
systems.
Pulling devices such as ropes or can-
vas straps are not recommended for
use in vehicle towing or recovery.
• Do not spin the tires above 35 MPH
(55 km/h).
5. If the vehicle cannot be freed after a few tries,
contact a professional towing service to re-
move the vehicle.
•
Rocking a stuck vehicle
If the vehicle is stuck in sand, snow, mud, etc., try
to free it by following the procedure below.
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is clear of obstructions.
3. Turn the steering wheel left and right to clear
an area around the front tires.
4. Slowly rock the vehicle forward and
backward.
• Shift back and forth between the R (Reverse)
and D (Drive) positions.
• Apply the accelerator as little as possible to
maintain the rocking motion.
In case of emergency 6-15