2010-2017 Nissan Leaf 4 Door Maintenance and do-it yourself -> Tire pressure User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it yourself -> Tire pressure for Your Nissan Leaf 4 Door First Generation (2010-2017)

WHEELS AND TIRES  
If you have a flat tire, see “Flat tire” in the  
“In case of emergency” section.  
recommended tire pressure specifica- Incorrect tire pressure, including un-  
tions are shown on the Tire and Loading der inflation, may adversely affect  
Information label under the “Cold Tire tire life and vehicle handling.  
Pressure” heading. The Tire and Loading  
TIRE PRESSURE  
Tire Pressure Monitoring System  
(TPMS)  
WARNING  
Information label is affixed to the driver  
side center pillar. Tire pressures should  
be checked regularly because:  
•
Improperly inflated tires can fail  
suddenly and cause an accident.  
The Gross Vehicle Weight rating  
(GVWR) is located on the F.M-  
.V.S.S. certification label. The ve-  
hicle weight capacity is indicated  
on the Tire and Loading Informa-  
tion label. Do not load your ve-  
hicle beyond this capacity. Over-  
loading your vehicle may result  
in reduced tire life, unsafe oper-  
ating conditions due to prema-  
ture tire failure, or unfavorable  
handling characteristics and  
could also lead to a serious acci-  
dent. Loading beyond the speci-  
fied capacity may also result in  
This vehicle is equipped with the Tire Pressure  
Monitoring System (TPMS). It monitors tire pres-  
sure of all tires. When the low tire pressure warn-  
ing light is lit, and the CHECK TIRE PRESSURE  
warning appears on the vehicle information dis-  
play, one or more of your tires is significantly  
under-inflated.  
•
• Most tires naturally lose air over time.  
• Tires can lose air suddenly when driven  
over potholes or other objects or if the  
vehicle strikes a curb while parking.  
The tire pressures should be checked  
when the tires are cold. The tires are  
considered COLD after the vehicle has  
been parked for 3 or more hours, or driven  
less than 1 mile (1.6 km) at moderate  
speeds.  
The TPMS will activate only when the vehicle is  
driven at speeds above 16 MPH (25 km/h). Also,  
this system may not detect a sudden drop in tire  
pressure (for example a flat tire while driving).  
For more details, see “Low tire pressure warning  
light” in the “Instruments and controls” section,  
“Tire Pressure Monitoring System (TPMS)” in the  
“Starting and driving” section and “Tire Pressure  
Monitoring System (TPMS)” in the “In case of  
emergency” section.  
The TPMS with Easy Fill Tire Alert also provides  
visual and audible signals outside the vehicle for  
inflating the tires to the recommended COLD tire  
pressure. (See “TPMS with Easy Fill Tire Alert” in  
the “Starting and driving” section.)  
Tire inflation pressure  
failure  
of  
other  
vehicle  
Check the pressure of the tires often and  
always prior to long distance trips. The  
8-26 Maintenance and do-it yourself  
components.  
•
•
Before taking a long trip, or  
whenever you heavily load your  
vehicle, use  
a
tire pressure  
gauge to ensure that the tire  
pressures are at the specified  
level.  
For additional information re-  
garding tires, refer to “Important  
Tire Safety Information” (US) or  
“Tire  
Safety  
Information”  
(Canada) in the Warranty Infor-  
mation Booklet.  
2
᭺
Vehicle load limit: See “Vehicle load-  
ing information” in the “Technical  
and consumer information” section.  
Tire and loading information label  
1
Seating capacity: The maximum  
number of occupants that can be  
seated in the vehicle.  
᭺
Maintenance and do-it yourself 8-27  
3
Original size: The size of the tires  
originally installed on the vehicle at  
the factory.  
3. Remove the gauge.  
᭺
4. Read the tire pressure on the gauge  
stem and compare it to the specifica-  
tion shown on the Tire and Loading  
Information label.  
5. Add air to the tire as necessary. If too  
much air is added, press the core of  
the valve stem briefly with the tip of the  
gauge stem to release pressure. Re-  
check the pressure and add or release  
air as necessary.  
4
᭺
Cold tire pressure: Inflate the tires to  
this pressure when the tires are  
cold. Tires are considered COLD  
after the vehicle has been parked for  
3 or more hours, or driven less than  
1 mile (1.6 km) at moderate speeds.  
The recommended cold tire inflation  
is set by the manufacturer to provide  
the best balance of tire wear, vehicle  
handling, driveability, tire noise, etc.,  
up to the vehicle’s GVWR.  
6. Install the valve stem cap.  
7. Check the pressure of all of the tires.  
COLD TIRE  
Checking tire pressure  
1. Remove the valve stem cap from the  
tire.  
5
᭺
Tire size — see “Tire labeling” in this  
section.  
Spare tire size or compact spare tire  
size (if so equipped)  
SIZE  
INFLATION  
PRESSURE  
2. Press the pressure gauge securely  
onto the valve stem. Do not press too  
hard or force the valve stem sideways,  
otherwise air will escape. If the hissing  
sound of air escaping from the tire is  
heard while checking the pressure, re-  
position the gauge to eliminate this  
leakage.  
6
᭺
FRONT  
ORIGI-  
NAL TIRE  
FRONT  
ORIGI-  
P205/55R16 250 kPa,  
89H 36 PSI  
P215/50R17 250 kPa,  
90V 36 PSI  
NAL TIRE  
8-28 Maintenance and do-it yourself  

Related Topics

Popular Owner Manuals