2010-2016 Nissan Micra 4 Door Instruments and controls -> Meters and gauges User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Meters and gauges for Your Nissan Micra 4 Door Fourth Generation (2010-2016)

1. Tachometer
2. Speedometer
3. Trip odometer reset switch/trip com-
puter mode
4. Instrument brightness control
5. Automatic Transmission (A/T) position
indicator (A/T models only)
6. Odometer/twin trip odometer/trip com-
puter
7. Fuel gauge
SPEEDOMETER AND ODOMETER
Speedometer
The speedometer indicates the vehicle speed.
LIC2283
LIC2118
METERS AND GAUGES
Instruments and controls 2-3
Odometer/Twin trip odometer
The odometer/twin trip odometer is displayed
when the ignition switch is placed in the ON
position.
The odometer
䊊
1
records the total distance the
vehicle has been driven.
The twin trip odometer
䊊
2
records the distance
of individual trips.
Changing the display:
Press the change button
䊊
3
to change the dis-
play as follows:
Odo → Trip A → Trip B → Ins fuel consumption →
Average fuel consumption → Cruising range or
(DTE) → Odo
For trip computer information, refer to “Trip com-
puter” in this section.
Resetting the trip odometer:
Press the change/reset button
䊊
3
for more than
1 second to reset the currently displayed trip
odometer to zero.
TACHOMETER
The tachometer indicates engine speed in revo-
lutions per minute (rpm). Do not rev the engine
into the red zone
䊊
1
.
CAUTION
When engine speed approaches the red
zone, shift to a higher gear or reduce en-
gine speed. Operating the engine in the
red zone may cause serious engine
damage.
LIC2119 LIC2107
2-4 Instruments and controls
FUEL GAUGE
The gauge indicates
䊊
A
the approximate fuel
level in the tank when the ignition switch is placed
in the ON position.
When one segment remains on the digital fuel
gauge, only one segment will blink. When no
segments remain on the digital fuel gauge, the
fuel gauge symbol and the scale will blink.
Refill the fuel tank before the gauge regis-
ters E (Empty).
The
indicates that the fuel-filler door is
located on the driver’s side of the vehicle.
CAUTION
● If the vehicle runs out of fuel, the
check engine light may come on. Refuel
as soon as possible. After a few driving
trips, the
light should turn off. If
the light remains on after a few driving
trips, have the vehicle inspected by a
NISSAN dealer.
● For additional information, refer to
“Malfunction Indicator Light (MIL)” in
this section.
TRIP COMPUTER
When the ignition switch is placed in the ON
position, modes of the trip computer can be
selected by pushing the trip computer
change/reset button
䊊
A
on the instrument panel
located near the speedometer. The following
modes can be selected in the display
䊊
B
:
● Instant fuel consumption
● Average fuel consumption
● Distance to empty
LIC2167 LIC2168
Instruments and controls 2-5
Instant fuel consumption
The instant fuel consumption mode shows the
instant fuel economy. The display updates in-
stantly when driving.
Average fuel consumption
The average fuel consumption mode shows the
average fuel consumption since the last reset.
Resetting is done by pressing the change/reset
button
䊊
A
for more than approximately 1 second.
Distance to empty
The distance to empty mode provides you with an
estimation of the distance that can be driven
before refueling. The range is constantly being
calculated, based on the amount of fuel in the fuel
tank and the actual fuel consumption.
The distance to empty includes a low range
warning feature: when the fuel level is low, the
distance to empty is automatically selected and
the digits blink in order to draw the driver’s atten-
tion. Press the trip computer change/reset button
䊊
A
if you wish to return to the mode that was
selected before the warning occurred.
When the fuel level drops even lower, the dis-
tance to empty will display (----).
Trip computer reset
Pressing the change/reset button for more than
3 seconds will reset all modes except Trip A and
distance to empty.
2-6 Instruments and controls

Related Topics

Popular Owner Manuals