BREAK-IN SCHEDULE
To reset at a faster cruising speed, use
To resume the preset speed, push and
release the ACCEL/RES switch. The vehicle
returns to the last set cruising speed when
the vehicle speed is over 37 km/h (23 mph).
CAUTION
one of the following three methods:
During the first 2,000 km (1,200 miles),
follow these recommendations to ob-
tain maximum engine performance
and ensure the future reliability and
economy of your new vehicle. Failure to
follow these recommendations may re-
sult in shortened engine life and re-
duced engine performance.
∙
Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the COAST/SET
switch.
∙
∙
Push and hold the ACCEL/RES switch.
When the vehicle attains the speed you
desire, release the switch.
∙
Avoid driving for long periods at con-
stant speed, either fast or slow, and do
not run the engine over 4,000 rpm.
Push and release the ACCEL/RES
switch. Each time you do this, the set
speed increases by about 1.6 km/h
(1 mph).
∙
Do not accelerate at full throttle in any
gear.
To reset at a slower cruising speed, use
one of the following three methods:
∙
∙
Avoid quick starts.
∙
∙
∙
Lightly tap the brake pedal. When the
vehicle attains the desired speed, push
the COAST/SET switch and release it.
Avoid hard braking as much as pos-
sible.
Push and hold the COAST/SET switch.
Release the switch when the vehicle
slows to the desired speed.
Push and release the COAST/SET
switch. Each time you do this, the set
speed decreases by about 1.6 km/h
(1 mph).
5-18 Starting and driving
English 
