CRUISE CONTROL (if so equipped)
∙
∙
To pass another vehicle, depress the
accelerator pedal. When you release the
pedal, the vehicle returns to the previ-
ously set speed.
WARNING
Do not use the cruise control when driv-
ing under the following conditions:
∙ When it is not possible to keep the
vehicle at a set speed.
The vehicle may not maintain the set
speed when going up or down steep
hills. If this happens, drive without the
cruise control.
∙ In heavy traffic or in traffic that varies
in speed.
To cancel the preset speed, use one of the
∙ On winding or hilly roads.
∙ On slippery roads (rain, snow, ice, etc.).
∙ In very windy areas.
following three methods:
∙
∙
∙
Push the CANCEL switch.
Tap the brake pedal.
Doing so could cause a loss of vehicle
control and result in an accident.
LSD2430
Push the CRUISE ON/OFF switch. The
CRUISE indicator light in the instrument
panel will go out.
PRECAUTIONS ON CRUISE
CONTROL
1. CANCEL switch
CRUISE CONTROL OPERATIONS
The cruise control is automatically can-
celed if:
The cruise control allows driving at a speed
between 37 - 144 km/h (23 - 89 mph) with-
out keeping your foot on the accelerator
pedal.
2. ACCEL/RES switch
3. COAST/SET switch
4. CRUISE ON/OFF switch
∙
You depress the brake pedal while
pushing the ACCEL/RES or COAST/SET
switch. The preset speed is deleted
from memory.
To turn on the cruise control, push the
CRUISE ON/OFF switch. The CRUISE indica-
tor light in the instrument panel comes on.
∙
If the cruise control system malfunc-
tions, it cancels automatically.
∙
∙
The vehicle slows down more than
13 km/h (8 mph) below the set speed.
To set cruising speed, accelerate the ve-
hicle to the desired speed, push the
COAST/SET switch and release it. Take your
foot off the accelerator pedal. Your vehicle
maintains the set speed.
∙
To properly set the cruise control sys-
tem, use the following procedures.
You move the shift lever to N (Neutral).
Starting and driving 5-17
English 
