Get Pre-driving checks and adjustments -> Mirrors Guide for Nissan Patrol SUV Sixth Generation (2010-2023)

MIRRORS

the headlights of the vehicle behind you

obstructs your vision at night.

ELECTRIC STEERING WHEEL ADJUST-

MENT

WARNING:

Push the adjusting lever

during the day for

Adjust the position of all mirrors before

driving. Do not adjust the mirror positions

while driving so that full attention may be

given to vehicle operation.

Tilt or telescopic operation

the best rearward visibility.

Automatic anti-glare type

INSIDE REARVIEW MIRROR

While holding the inside rearview mirror, adjust

the mirror angles until the desired position is

achieved.

SPA2754

Move the lever

to adjust the steering wheel

SPA2162

up or down, forward or rearward until the

desired position is achieved.

The inside rearview mirror is designed so that it

automatically changes reflection according to

the intensity of the headlights of the vehicle

following you.

The anti-glare system will be automatically

turned on when you push the ignition switch

to the “ON” position.

Entry/Exit function (if equipped)

The automatic drive positioner system will

make the steering wheel move up automati-

cally when the driver’s door is opened with the

ignition switch in the “LOCK” position. This

function allows the driver get into and out of

the seat more easily.

SPA2447

Manual anti-glare type

When the system is turned on, the indicator

light

will illuminate and excessive glare from

For more information, see “Automatic drive

the headlights of the vehicle behind you will be

positioner” (P.3-34).

reduced.

Push the

switch

for 3 seconds to make

the inside rearview mirror operate normally

and the indicator light will turn off. Push the

switch again for 3 seconds to turn the

system on.

Do not hang any objects on the mirror or

apply glass cleaner. Doing so will reduce the

SPA2143

sensitivity of the sensor

improper operation.

, resulting in

Pull the adjusting lever

when the glare from

Pre-driving checks and adjustments 3-25

.

Be sure to adjust the Intelligent Rear View

Mirror before driving. Switch the system

to the conventional rearview mirror mode

and be properly seated on the driver’s

seat. Then adjust the rearview mirror so

as to see the rear window properly.

Driving without adjusting the rearview

mirror may cause difficulty in watching

the display at Intelligent Rear View Mirror

mode (camera view mode) due to the

reflection from the surface of the mirror.

If the Intelligent Rear View Mirror mal-

functions, immediately switch the system

to the conventional rearview mirror

mode. Have the system checked by a

NISSAN dealer.

When strong light (for example, sunlight

or high beams from following vehicles)

enters the camera, a light beam or a

glaring light may appear on the display

screen of the Intelligent Rear View Mirror.

In that case, switch the system to the

conventional rearview mirror mode ap-

propriately.

If dirt, rain or snow accumulates on the

exterior glass surface covering the cam-

era, the Intelligent Rear View Mirror may

not display objects clearly. Use of the rear

window wiper/washer may improve vis-

ibility, but if not, switch the Intelligent

Rear View Mirror to the conventional

rearview mirror mode until a time the

glass covering the camera can be

cleaned.

Components:

Intelligent Rear View Mirror (if equipped)

WARNING:

Failure to follow the warnings and instruc-

tions for proper use of the Intelligent Rear

View Mirror could result in serious injury or

death.

.

The Intelligent Rear View Mirror is a

convenience feature but it is not a sub-

stitute for proper vehicle operation. The

system has areas where objects cannot

be viewed. Check the blind spot of the

Intelligent Rear View Mirror before vehicle

operation. The driver is always responsi-

ble for safe driving.

.

JVP0488X

Except for Mexico

.

Do not disassemble or modify the Intel-

ligent Rear View Mirror, the camera unit

or wirings. If you do, it may result in

accidents or fire. In case you notice

smoke or smell coming from the Intelli-

gent Rear View Mirror, stop using the

system immediately. See a NISSAN dealer

for servicing.

.

Do not operate the Intelligent Rear View

Mirror while driving. Doing so can be a

distraction and it could lose control of

your vehicle and cause an accident or

serious injury.

JVP0515X

For Mexico

MENU button

Left button

Right button

Mode select lever

HomeLink® buttons (1-3)

Do not gaze into the Intelligent Rear View

Mirror display during driving. It may

cause

a distraction and it could lose

control of your vehicle and cause an

accident or serious injury. Gazing into

the display screen during driving also

can be a cause of carsick for passengers.

Intelligent Rear View Mirror provides a clear

rearview from a camera located on the rear of

the vehicle. Intelligent Rear View Mirror has two

modes: conventional rearview mirror mode and

Intelligent Rear View Mirror mode (camera view

mode). You can switch these two modes by the

.

Do not put a cigarette or flames to the

Intelligent Rear View Mirror, the camera

unit or wirings. It may cause a fire.

mode select lever

.

3-26 Pre-driving checks and adjustments

Except for Mexico: When the Intelligent Rear

View Mirror mode is selected, the indicator is

displayed. (If malfunction occurs in the

Constant daytime mode (if equipped)

DIMMING mode (if equipped)

a

Intelligent Rear View Mirror, the indicator

will

turn off or not appear when the Intelligent Rear

View Mirror mode is selected.)

For the operation of the HomeLink® buttons

(if equipped), see “HomeLink® Universal Trans-

ceiver” (P.2-73).

How to change the mode:

JVP0495X

JVP0573X

If it is not desirable to shift the display screen to

night mode when turning on the headlights,

such as during daytime or twilight, the display

screen can be shifted to daytime mode by

DIMMING mode enables to adjust the amount

of light on the display screen. In night mode,

the DIMMING mode can be selected when the

constant daytime mode and PLS mode are

turned off under the MENU button operation.

(See “How to make settings of Intelligent Rear

View Mirror (MENU button operation)” (P.3-28).)

pushing the right button

.

Push the right button

once, the display

screen will automatically enter daytime

mode.

.

Push the right button

once to select the

JVP0489X

DIMMING mode. (“DIMMING” appears in the

.

Push the right button

once again, the

Example

upper right corner.)

Push the right button

return to night mode.

display screen will return to night mode.

The mode can be switched when the ignition

.

once again to

The constant daytime mode will automatically

return to night mode when the ignition switch

is placed in the “OFF” position.

switch is in the “ON” position.

.

Pull the mode select lever

to switch to

When the DIMMING mode is selected, adjust the

brightness of the display screen in “BRIGHT-

NESS” under the MENU button operation.

the Intelligent Rear View Mirror mode

(camera view mode).

Push the mode select lever

to switch to

The DIMMING mode will automatically return to

night mode when the ignition switch is placed

in the “OFF” position.

the conventional rearview mirror mode.

How to change night mode setting of Intel-

ligent Rear View Mirror on initial screen

(except for Mexico):

Once the headlights are turned on, the display

screen will automatically enter night mode. In

night mode, the brightness of the display

screen is decreased to reduce dazzling. This

setting can be changed on the initial screen.

Pre-driving checks and adjustments 3-27

mode (if equipped) ? BRIGHTNESS ? DOWN/

UP ? LEFT/RIGHT ? ROTATION ? INDICATION

? LANGUAGE (if equipped) ? PLS (if equipped)

? MENU (initial screen)

to night mode when turning on the headlights,

such as during daytime or twilight, turn the

constant daytime mode on.

How to make settings of Intelligent Rear View

Mirror (MENU button operation):

.

Push the left button

to turn off the

For Mexico:

constant daytime mode.

.

Push the right button

to turn on the

MENU (initial screen) ? BRIGHTNESS ? DOWN/

UP ? ROTATION ? INDICATION ? DIMMING

MIRROR ? LANGUAGE ? MENU (initial screen)

constant daytime mode.

BRIGHTNESS

NOTE:

.

To switch the image quality adjustment

items with the MENU button , push the

button within 5 seconds after completing

the adjustment of the previous item. If 5

seconds or more pass, the display will

return to MENU (initial screen).

When one of the HomeLink® buttons is

pushed, the display will show the

HomeLink® screen (for Mexico).

JVP0490X

Except for Mexico

.

Constant daytime mode (if equipped)

JVP0491X

Except for Mexico

JVP0506X

For Mexico

You can choose display settings of the Intelli-

gent Rear View Mirror such as brightness,

camera angle, textual indication ON or OFF

and language (if equipped).

JVP0574X

When the Intelligent Rear View Mirror mode is

JVP0507X

The constant daytime mode can be turned on

or off while the display is in night mode and the

PLS mode is turned off. Once the headlights are

turned on, the display will automatically enter

night mode. In night mode, the brightness of

the display screen is decreased to reduce

dazzling. If it is not desirable to shift the display

on, setting menu can be selected by pushing

For Mexico

the MENU button

. Each time the MENU

The brightness of the display screen can be

button

is pushed, the setting menu will

adjusted.

change as follows.

Except for Mexico:

MENU (initial screen)

.

Push the left button

to dim the screen.

?

Constant daytime

3-28 Pre-driving checks and adjustments

.

Push the right button

screen.

to brighten the

LEFT/RIGHT (except for Mexico)

DOWN/UP

JVP0510X

For Mexico

JVS0981X

The camera angle of the display screen can be

rotated.

The horizontal camera angle of the display

screen can be adjusted.

JVP0492X

.

Push the left button to rotate the camera

angle to the left.

Except for Mexico

.

Push the left button

to move the camera

Push the right button

to rotate the

angle to the left.

camera angle to the right.

.

Push the right button

camera angle to the right.

to move the

INDICATION

ROTATION

JVP0508X

For Mexico

The vertical camera angle of the display screen

can be adjusted.

JVP0494X

.

Push the left button to down the camera

angle.

Except for Mexico

JVP0493X

Push the right button

to up the camera

Except for Mexico

angle.

Pre-driving checks and adjustments 3-29

The mirror is designed so that it automatically

changes reflection according to the intensity of

the headlights of the following vehicle. You can

enable or disable the automatic anti-glare

mode.

Except for Mexico:

Select the language by using the

or

button. You can select either English or Arabic.

The language setting will be retained even if

the engine is restarted.

.

Push the left button

to enable the

For Mexico:

automatic anti-glare mode.

Select the language by using the

or

.

Push the right button

to disable the

button. You can select either English or French.

The language setting will be retained even if

the engine is restarted.

automatic anti-glare mode.

LANGUAGE (if equipped)

JVP0511X

PLS (if equipped)

For Mexico

The textual indication can be turned on or off

on the Intelligent Rear View Mirror display

screen.

Except for Mexico:

.

Push the left button

textual indication on the display screen.

Push the right button to enable the

textual indication on the display screen.

For Mexico:

to disable the

.

JVP0544X

Except for Mexico

.

Push the right button

to disable the

JVP0575X

textual indication on the display screen.

.

Push the left button to enable the textual

The PLS (Point Light Source) mode can be

turned on or off. When this mode is on, a high

resolution image is displayed, which helps

recognize the headlights of the vehicle behind

in the distance, for example.

indication on the display screen.

DIMMING MIRROR (for Mexico)

.

Push the left button

to turn off the PLS

mode.

.

Push the right button

to turn on the PLS

mode. (“PLS” appears in the upper right

corner.)

JVP0512X

The PLS mode will automatically be turned off

when the ignition switch is placed in the “OFF”

position.

For Mexico

The language of the textual indication can be

selected on the Intelligent Rear View Mirror

display screen.

JVP0514X

3-30 Pre-driving checks and adjustments

.

Due to diffused reflection from external

environment, images on the screen may

flicker. This is not a malfunction.

.

Defog the rear window with defogger

when rear window is fogged. Use the

conventional rearview mirror mode until

the rear window is fully defogged.

The display of the Intelligent Rear View

Mirror may become hot. This is not a

malfunction.

The color of an object in the distance or in

the dark may be difficult to be recog-

nized. This is not a malfunction.

Intelligent Rear View Mirror system precau-

tions:

NOTE:

A quick movement of a thing may not be

able to display on the camera view

screen. This is not a malfunction.

.

Long-term use of this system in stopping

engine may cause battery to be dis-

charged.

.

Turn on the headlights at twilight or in a

.

Do not attach an antenna of wireless

device near the Intelligent Rear View

Mirror. Electric wave from wireless device

may cause disturbed image in Intelligent

Rear View Mirror.

tunnel, etc.

The Intelligent Rear View Mirror mode

(camera view mode) display is different

from the conventional rearview mirror.

Objects in the display may differ from

actual distance. Do not solely rely on the

Intelligent Rear View Mirror. Always rely

on your own operation to avoid acci-

dents.

System maintenance (Intelligent Rear View

Mirror):

.

Do not push buttons excessively or oper-

ating the lever roughly may cause

a

Always keep the mirror and camera area of

system failure or the Intelligent Rear View

the rear window clean.

Mirror itself to drop.

Clean the mirror and the camera lens with

a dry soft cloth.

.

Never turn the body of Intelligent Rear

View Mirror by 90° or more. It may

damage the Intelligent Rear View Mirror.

Do not apply strong shocks to the body of

Intelligent Rear View Mirror. It may cause

a system failure.

Do not apply heavy load to the camera

and camera-cover on the rear of the

vehicle. It may cause the camera to be

removed or may cause a system failure.

If it is difficult to see the Intelligent Rear

View Mirror display screen because of a

strong external light, switch the mode to

the conventional rearview mirror mode

for better use.

.

Immediately after the Intelligent Rear

View Mirror is switched from one mode

to another, you may have difficulty in

focusing on the image in the mirror/

display screen with your eyes. Be cau-

tious using the Intelligent Rear View

Mirror until your eyes get accustomed to

the selected mode. If it is necessary to

correct eye focusing, the use of multifocal

glasses, etc. is recommended.

If the brightness of the camera view

display is adjusted to excessive bright

level, it may cause an eyestrain in the

driving. Adjust the brightness properly.

Use the rear window wiper when it rains.

If the camera view image is still unclear

when the rear window wiper is in opera-

tion, check the deterioration of the rear

window wiper blade.

When using the rear window wiper,

images on the screen may flicker. This is

not a malfunction.

When clean the camera area of the rear

window, using a soft cloth dampened with

water and a few neutral detergent. And

after, the dry it up with dry soft cloth.

If the image on the Intelligent Rear View

Mirror display screen is still unclear even

after cleaning the camera area of the rear

window, an oil film may be adhering to the

rear window glass. Clean the rear window

glass with an oil film remover.

Never use alcohol, benzine, thinner, or any

similar material to clean the mirror or

camera lens. It will cause a discoloration,

deterioration or a system malfunction.

Do not attach a sticker (including transpar-

ent material) on the camera area of the

rear window.

.

Close the sunshade (if equipped) when

the Intelligent Rear View Mirror display

screen is unclear due to strong external

light.

When LED headlights are viewed on the

Intelligent Rear View Mirror display, the

images may flicker. This is normal.

.

Pre-driving checks and adjustments 3-31

.

Do not touch the mirrors while they are

moving. Your hand may be pinched, and

the mirror may malfunction.

OUTSIDE REARVIEW MIRRORS

Defogging (if equipped)

The outside rearview mirrors will be heated

when the rear window defogger switch is

operated.

WARNING:

.

Do not drive with the mirrors stored. You

.

Never touch the outside rearview mirrors

while they are in motion. Doing so may

pinch your fingers or damage the mirror.

Never drive the vehicle with the outside

rearview mirrors folded. This reduces rear

view visibility and may lead to an acci-

dent.

will be unable to see behind the vehicle.

Folding

If mirrors are manually operated or

bumped, the mirror body can become

loose at the pivot point. To correct

electronic mirror operation, cycle the

mirrors by pushing the “CLOSE” until

completely closed, then push “OPEN”

until the mirrors are in the open position.

.

Objects viewed in the outside mirror are

closer than they appear (if equipped).

Reverse tilt-down feature (if equipped)

When backing up the vehicle, the right and left

outside mirrors will turn downward automati-

cally to provide better rear visibility.

The picture dimensions and distance in

the outside mirrors are not real.

Adjusting

SPA2738

1. Push the ignition switch to the “ON” posi-

tion.

The outside rearview mirror remote control

operates when the ignition switch is in the

“ACC” or “ON” position.

2. Move the shift lever to the “R” (Reverse)

position.

3. Choose the right or left outside mirror by

The outside rearview mirrors automatically fold

operating the outside mirror control switch.

when the outside rearview mirror folding

switch is pushed to the “CLOSE” position

.

4. The outside mirror surfaces move down-

ward.

To unfold, push to the “OPEN” position

.

If mirrors are manually operated or bumped,

the mirror body can become loose at the pivot

point. To correct electronic mirror operation,

cycle the mirrors by pushing the “CLOSE” until

completely closed, then push “OPEN” until the

mirrors are in the open position.

When one of the following conditions has

occurred, the outside mirror surfaces will

return to its original position.

SPA2739

.

The shift lever is moved to any position

The outside rearview mirror remote control

operates when the ignition switch is in the

“ACC” or “ON” position.

other than “R” (Reverse).

The outside mirror control switch is set to

the center position.

CAUTION:

1. Move the switch

to select the left (L) or

The ignition switch is placed in the “OFF”

right (R) mirror.

.

Continuously performing the fold/unfold

operation of the outside rearview mirror

may cause the switch to stop the opera-

tion.

position.

2. Adjust each mirror by pushing the switch

until the desired position is achieved.

3-32 Pre-driving checks and adjustments

PARKING BRAKE

the foot brake

and then fully depress and

Automatic anti-glare (if equipped)

WARNING:

release the parking brake pedal

.

The outside rearview mirror is designed so that

it automatically changes reflection according

to the intensity of the headlights of the vehicle

following you.

Before driving, be sure that the brake warning

.

Never drive the vehicle with the parking

brake applied. The brake will overheat

and fail to operate and will lead to an

accident.

Never release the parking brake from

outside the vehicle. If the vehicle moves,

it will be impossible to push the brake

pedal and will lead to an accident.

light has turned off.

The anti-glare system will be automatically

turned on when you push the ignition switch

to the “ON” position.

VANITY MIRROR

.

Never use the shift lever in place of the

parking brake. When parking, be sure the

parking brake is fully applied.

To help avoid risk of injury or death

through unintended operation of the

vehicle and/or its systems, do not leave

children, people who require the assis-

tance of others or pets unattended in

your vehicle. Additionally, the tempera-

ture inside a closed vehicle on a warm

day can quickly become high enough to

cause a significant risk of injury or death

to people and pets.

SIC4448

To use the front vanity mirror, pull down the

sun visor and pull up the cover.

SPA2331

To apply the parking brake, firmly depress the

parking brake pedal

.

To release the parking brake, depress and hold

Pre-driving checks and adjustments 3-33

Download User Manual App

Pre-driving checks and adjustments -> Mirrors for Your Nissan Patrol SUV Sixth Generation (2010-2023)

Related Topics

Pre-driving checks and adjustments

Popular Owner Manuals

Latest Owner Manuals