2006-2014 Nissan Qashqai SUV Appearance and care User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Appearance and care for Your Nissan Qashqai SUV First Generation (2006-2014)

7 Appearance and care  
Cleaning exterior...................................................... 7-2  
Washing............................................................. 7-2  
Removing spots.................................................. 7-2  
Waxing............................................................... 7-2  
Cleaning glass.................................................... 7-3  
Cleaning rear-view camera (where fitted) ............ 7-3  
Underbody ......................................................... 7-3  
Care of wheels ................................................... 7-3  
Cleaning alloy wheels ......................................... 7-3  
Chrome parts ..................................................... 7-3  
Cleaning interior ...................................................... 7-4  
Monitor display’s maintenance (where fitted)....... 7-4  
Floor mats .......................................................... 7-4  
Cleaning Glass................................................... 7-4  
Plastic parts........................................................ 7-4  
Seat belts........................................................... 7-4  
Corrosion protection................................................ 7-5  
Most common factors contributing to vehicle  
corrosion............................................................ 7-5  
Environmental factors influence the rate of  
corrosion............................................................ 7-5  
To protect your vehicle from corrosion ................ 7-5  
Downloaded from manuals search engine  
CLEANING EXTERIOR  
In order to maintain the appearance of your vehicle,  
it is important to take proper care of it.  
CAUTION  
If using a high pressure washer always follow  
the recommendations on the equipment (pres-  
sure and spraying distance).  
•
Do not wash the vehicle with strong house-  
hold soap, strong chemical detergents, petrol  
or solvents.  
•
•
•
Whenever possible, park your vehicle inside a ga-  
rage or in a covered area to minimise the chances  
of damaging the paint surface of your vehicle.  
CAUTION  
Do not wash the vehicle in direct sunlight or  
while the vehicle body is hot, as the paint sur-  
face may become water-spotted.  
Do not spray directly into the engine compart-  
ment with a high-pressure washer/hose this  
could damage the engine.  
When it is necessary to park outside, park in a shady  
area or protect the vehicle with a body cover. Be  
careful not to scratch the paint surface when put-  
ting on or removing the body cover.  
Avoid using tight-napped or rough cloths,  
such as washing mitts. Care must be taken  
when removing caked-on dirt or other foreign  
substances so the paint surface is not  
scratched or damaged.  
If there are damaged areas on the vehicle (e.g.  
painted bumpers or headlamp assembly), it is  
not recommended to direct the high pressure jet  
on to them. Carefully wash these areas by hand.  
•
•
WASHING  
In the following instances, wash your vehicle as soon  
as possible to protect the paint surface:  
Avoid the entry of water into the locks.  
3. Rinse the vehicle thoroughly with plenty of clean  
water.  
After a rainfall, to prevent possible damage from  
acid rain.  
REMOVING SPOTS  
•
Remove tar and oil spots, industrial dust, insects,  
and tree sap as quickly as possible from the paint  
surface to avoid lasting damage or staining. Special  
cleaning products are available at a NISSAN dealer  
or any automotive accessory store.  
4. Use a damp chamois to dry the paint surface to  
avoid leaving water spots.  
After driving on coastal roads.  
•
•
When contaminants such as soot, bird drop-  
pings, tree sap, metal particles or insects get on  
the paint surface.  
When washing the vehicle, take care of the follow-  
ing:  
Inside flanges, joints and folds on the doors, back  
•
WAXING  
When dust or mud builds up on the paint sur-  
face.  
•
door and bonnet are particularly vulnerable to  
the effects of road salt. Therefore, these areas  
must be cleaned regularly.  
Regular waxing protects the paint surface and helps  
to retain a new vehicle appearance.  
1. Wash the vehicle surface with a wet sponge and  
plenty of water.  
After waxing, polishing is recommended to remove  
built-up residue.  
Be sure that the drain holes in the lower edge of  
the doors are not clogged.  
•
2. Clean the vehicle surface gently and thoroughly  
using a mild soap or a special vehicle wash sham-  
poo mixed with clean, lukewarm (never hot) wa-  
ter.  
A NISSAN dealer or qualified workshop can assist  
you in choosing the appropriate waxing products.  
Spray water to the underbody and in the wheel  
wells to loosen the dirt and/or wash away road  
salt.  
•
CAUTION  
Wash your vehicle thoroughly and completely  
before applying wax to the paint surface.  
•
7-2 Appearance and care  
Downloaded from manuals search engine  
Always follow the manufacturer’s instructions  
supplied with the wax.  
Do not use body wax on the transparent cam-  
era cover.  
NISSAN recommends that the road wheels be  
waxed to protect against road salt in areas where  
it is used during winter.  
•
•
•
•
•
Do not use a wax containing any abrasives,  
cutting compounds or cleaners that may dam-  
age the vehicle finish.  
When washing the vehicle with a high pres-  
sure water spray, make sure not to spray it  
around the transparent camera cover. Other-  
wise, water may enter the camera unit caus-  
ing water condensation on the lens and it may  
result in a malfunction or an electric shock.  
CLEANING ALLOY WHEELS  
Wash the wheels regularly with a sponge damp-  
ened in a mild soap solution, especially during win-  
ter in areas where road salt is used. The salt residue  
from road salt could discolour the wheels if it is not  
washed off regularly.  
If the vehicle surface cannot polish easily, ap-  
ply a road tar remover prior to waxing the ve-  
hicle.  
•
•
UNDERBODY  
Machine compounding or aggressive polish-  
ing on a base coat/clear coat paint finish may  
dull the finish or leave swirl marks.  
In areas where road salt is used in the winter, the  
vehicle’s underbody must be cleaned regularly. This  
will prevent dirt and salt from building up and caus-  
ing underbody and suspension corrosion.  
CAUTION  
Follow the directions as described below in order  
to avoid staining or discolouring of the wheels.  
CLEANING GLASS  
Use glass cleaner to remove smoke and dust film  
from the glass surfaces. It is normal for glass to  
become coated with a film after the vehicle is parked  
in the hot sun. Glass cleaner and a soft cloth will  
easily remove this film.  
Do not use a cleaner that contains strong con-  
tents of acid or alkali to clean the wheels.  
•
Before the winter period and again in the spring, the  
underseal must be checked and, if necessary, re-  
treated.  
Do not apply wheel cleaner when the wheels  
are hot. The wheel temperature should be the  
same as ambient temperature.  
•
CARE OF WHEELS  
Wash the wheels when washing the vehicle to  
maintain their appearance.  
CLEANING REAR-VIEW CAMERA  
(where fitted)  
•
Rinse the wheel to completely remove the  
cleaner within 15 minutes after the cleaner  
has been applied.  
•
Clean the inner side of the wheels when the  
wheel is changed or the underside of the vehicle  
is washed.  
Clean the transparent camera cover regularly. If dirt,  
rain or snow attaches to the cover, the monitor may  
not display objects clearly.  
•
CHROME PARTS  
Clean all chrome parts regularly with a nonabrasive  
chrome polish to maintain the finish.  
Do not use abrasive cleaners when washing the  
wheels.  
CAUTION  
•
Do not use alcohol, benzine or thinner to clean  
•
Inspect wheel rims regularly for dents or corro-  
sion. This may cause loss of pressure or damage  
the tyre bead.  
the transparent camera cover. This will cause  
discoloration. To clean the cover, first use a  
cloth dampened with diluted mild cleaning  
agent and then wipe with a dry cloth.  
•
Appearance and care 7-3  
Downloaded from manuals search engine  
CLEANING INTERIOR  
Occasionally remove loose dust from the interior  
trim, plastic parts and seats using a vacuum cleaner  
or soft bristled brush. Wipe the vinyl and leather sur-  
faces with a clean, soft cloth dampened in mild soap  
solution, then wipe clean with a dry, soft cloth.  
CAUTION  
MONITOR DISPLAY’S MAINTENANCE  
(where fitted)  
When cleaning the inside of the windows, do not  
use sharp-edged tools, abrasive cleaners or chlo-  
rine-based disinfectant cleaners. They could  
damage elements in the rear windows (such as  
the window defogger).  
To clean the display screen, first turn the ignition  
off and wipe it with a dry soft cloth.  
•
Never use a rough cloth, alcohol, benzine, thin-  
•
Regular care and cleaning is required in order to  
maintain the appearance of the leather.  
ner, any kind of solvent, or paper tissues with  
chemical cleaning agent. They would scratch or  
deteriorate the panel.  
Inside rear-view mirror (Automatic  
anti-dazzling, where fitted)  
Before using any fabric protector, read the manu-  
facturer’s recommendations. Some fabric protec-  
tors contain chemicals that may stain or bleach the  
seat material.  
Use a soft cloth dampened only with water to clean  
the automatic anti-dazzling inside rear view mirror  
(where fitted).  
Do not splash any liquid such as water or car fra-  
•
grance on the display. Contact with liquid will  
cause the system to malfunction and damage  
the hardware.  
Use a soft cloth dampened only with water to clean  
the meter and gauge lens covers.  
CAUTION  
In case of extreme stain, use a small amount of  
neutral detergent with a soft cloth. Never soak  
the screen display with water detergent.  
•
Do not use glass cleaner. Doing so will reduce  
the sensitivity of the sensor, resulting in improper  
operation.  
CAUTION  
Never use benzine, thinner or any similar ma-  
terial.  
•
FLOOR MATS  
PLASTIC PARTS  
Small dirt particles can be abrasive and dam-  
•
The use of NISSAN floor mats can extend the life of  
your vehicle carpet and make it easier to clean the  
interior. Regardless of what mats are used, be sure  
they are fitted for your vehicle and are properly posi-  
tioned in the foot well to prevent interference with  
pedal operation. Mats should be maintained with  
regular cleaning and replaced if they become exces-  
sively worn.  
Plastic parts can be cleaned with a mild soap solu-  
tion. If the dirt cannot be easily removed, use a plas-  
tic cleaner. Do not use any solvents.  
aging to leather surfaces and should be re-  
moved promptly. Do not use saddle soap, car  
waxes, polishes, oils cleaning fluids, solvents,  
detergents or ammonia based cleaners as  
they may damage the leather’s natural finish.  
SEAT BELTS  
Never use fabric protectors unless recom-  
mended by the manufacturer.  
WARNING  
•
Do not allow wet seat belts to roll up in the  
retractor.  
•
Do not use glass or plastic cleaner on meter  
or gauge lens covers. It may damage the lens  
covers.  
CLEANING GLASS  
•
Use glass cleaner to remove smoke and dust film  
from the glass surfaces. It is normal for glass to  
become coated with a film after the vehicle is parked  
in the hot sun. Glass cleaner and a soft cloth will  
easily remove this film.  
Never use bleach, dye or chemical solvents to  
clean the seat belts, since these materials  
may severely weaken the seat belt webbing.  
•
7-4 Appearance and care  
Downloaded from manuals search engine  
CORROSION PROTECTION  
The seat belts can be cleaned by wiping them with  
a sponge dampened in a mild soap solution.  
Corrosion will also accelerate in areas where the  
temperatures stay above freezing.  
MOST COMMON FACTORS  
CONTRIBUTING TO VEHICLE  
CORROSION  
Allow the belts to dry completely in the shade before  
using them.  
Air pollution  
The accumulation of moisture-retaining dirt and  
debris in body panel sections, cavities, and other  
areas.  
Industrial pollution, the presence of salt in the air in  
coastal areas, or heavy road salt use will accelerate  
the corrosion process. Road salt will also acceler-  
ate the disintegration of paint surfaces.  
•
Damage to the paint surface and other protec-  
tive coatings caused by gravel and stone chips  
or minor traffic accidents.  
•
TO PROTECT YOUR VEHICLE FROM  
CORROSION  
ENVIRONMENTAL FACTORS  
INFLUENCE THE RATE OF  
CORROSION  
Wash and wax your vehicle often to keep the  
vehicle clean.  
•
Always check for minor damage to the paint sur-  
face and if any exists, repair it as soon as pos-  
sible.  
•
Moisture  
Accumulation of sand, dirt and water on the vehicle  
body underside can accelerate corrosion. Wet floor  
coverings will not dry completely inside the vehicle,  
and should be removed for drying to avoid floor pan-  
els corrosion.  
Keep the drain holes at the bottom of the doors  
and back door opened to avoid water accumula-  
tion.  
•
Check the vehicle underbody for accumulation  
of sand, dirt or salt. If present, wash with water  
as soon as possible.  
•
Relative humidity  
Corrosion will be accelerated in areas of high rela-  
tive humidity, especially those areas where the tem-  
peratures stay above freezing, where atmospheric  
pollution exists and road salt is used.  
CAUTION  
Never remove dirt, sand or other debris from  
•
the passenger compartment by washing it out  
with a hose. Remove dirt with a vacuum  
cleaner or broom.  
Temperature  
A temperature increase will accelerate the rate of  
corrosion to those parts which are not well venti-  
lated.  
Never allow water or other liquids to come in  
contact with electronic components inside the  
vehicle as this may damage them.  
•
Appearance and care 7-5  
Downloaded from manuals search engine  
Chemicals used for road surface de-icing are ex-  
tremely corrosive. They accelerate corrosion and  
deterioration of underbody components such as the  
exhaust system, fuel and brake lines, brake cables,  
floor pan and fenders.  
In the winter, the underbody must be cleaned  
periodically.  
For additional protection against rust and corrosion,  
which may be required in some areas, consult a  
NISSAN dealer or qualified workshop.  
7-6 Appearance and care  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals