Always follow the manufacturer’s instructions
supplied with the wax.
Do not use body wax on the transparent cam-
era cover.
NISSAN recommends that the road wheels be
waxed to protect against road salt in areas where
it is used during winter.
•
•
•
•
•
Do not use a wax containing any abrasives,
cutting compounds or cleaners that may dam-
age the vehicle finish.
When washing the vehicle with a high pres-
sure water spray, make sure not to spray it
around the transparent camera cover. Other-
wise, water may enter the camera unit caus-
ing water condensation on the lens and it may
result in a malfunction or an electric shock.
CLEANING ALLOY WHEELS
Wash the wheels regularly with a sponge damp-
ened in a mild soap solution, especially during win-
ter in areas where road salt is used. The salt residue
from road salt could discolour the wheels if it is not
washed off regularly.
If the vehicle surface cannot polish easily, ap-
ply a road tar remover prior to waxing the ve-
hicle.
•
•
UNDERBODY
Machine compounding or aggressive polish-
ing on a base coat/clear coat paint finish may
dull the finish or leave swirl marks.
In areas where road salt is used in the winter, the
vehicle’s underbody must be cleaned regularly. This
will prevent dirt and salt from building up and caus-
ing underbody and suspension corrosion.
CAUTION
Follow the directions as described below in order
to avoid staining or discolouring of the wheels.
CLEANING GLASS
Use glass cleaner to remove smoke and dust film
from the glass surfaces. It is normal for glass to
become coated with a film after the vehicle is parked
in the hot sun. Glass cleaner and a soft cloth will
easily remove this film.
Do not use a cleaner that contains strong con-
tents of acid or alkali to clean the wheels.
•
Before the winter period and again in the spring, the
underseal must be checked and, if necessary, re-
treated.
Do not apply wheel cleaner when the wheels
are hot. The wheel temperature should be the
same as ambient temperature.
•
CARE OF WHEELS
Wash the wheels when washing the vehicle to
maintain their appearance.
CLEANING REAR-VIEW CAMERA
(where fitted)
•
Rinse the wheel to completely remove the
cleaner within 15 minutes after the cleaner
has been applied.
•
Clean the inner side of the wheels when the
wheel is changed or the underside of the vehicle
is washed.
Clean the transparent camera cover regularly. If dirt,
rain or snow attaches to the cover, the monitor may
not display objects clearly.
•
CHROME PARTS
Clean all chrome parts regularly with a nonabrasive
chrome polish to maintain the finish.
Do not use abrasive cleaners when washing the
wheels.
CAUTION
•
Do not use alcohol, benzine or thinner to clean
•
Inspect wheel rims regularly for dents or corro-
sion. This may cause loss of pressure or damage
the tyre bead.
the transparent camera cover. This will cause
discoloration. To clean the cover, first use a
cloth dampened with diluted mild cleaning
agent and then wipe with a dry cloth.
•
Appearance and care 7-3
Downloaded from manuals search engine