2021-2026 Nissan Qashqai SUV Do-it-yourself -> Wheels and tires User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Do-it-yourself -> Wheels and tires for Your Nissan Qashqai SUV Third Generation (2021-2026)

WHEELS AND TIRES  
If you have a flat tire, see “Flat tire” (P.6-  
3).  
TIRE PRESSURE  
Tire Pressure Monitoring System  
(TPMS)  
This vehicle is equipped with the Tire  
Pressure Monitoring System (TPMS). It  
monitors tire pressure of all tires except  
the spare (if so equipped). When the low  
tire pressure warning light is lit, and the  
“Tire Pressure Low - Add Air” warning  
message is displayed in the vehicle in-  
formation display, one or more of your  
tires is significantly under-inflated.  
The TPMS will activate only when the  
vehicle is driven at speeds above 16 MPH  
(25 km/h). Also, this system may not  
detect a sudden drop in tire pressure  
(for example a flat tire while driving).  
SDI1499A  
Room light  
For more details, see “Low tire pressure  
warning light” (P.2-14), “Tire Pressure Mon-  
itoring System (TPMS)” (P.5-5) and “Tire  
Pressure Monitoring System (TPMS)” (P.6-  
3).  
SDI2653  
Cargo light  
Do-it-yourself 8-29  
CarManuals2.com  
Tire inflation pressure  
outside the vehicle for inflating the  
tires to the recommended COLD  
tire pressure. (See “TPMS with Easy  
Fill Tire Alert” (P.5-8).)  
Incorrect tire pressure, including  
under inflation, may adversely  
affect tire life and vehicle hand-  
ling.  
handling characteristics  
and could also lead to a  
serious accident. Loading  
beyond the specified capa-  
city may also result in failure  
of other vehicle compo-  
nents.  
Before taking a long trip, or  
whenever you heavily load  
your vehicle, use a tire pres-  
sure gauge to ensure that  
the tire pressures are at the  
specified level.  
For additional information  
regarding tires, refer to “Im-  
portant Tire Safety Informa-  
tion” (US) or “Tire Safety  
Information” (Canada) in the  
Warranty Information Book-  
let.  
Check the pressure of the tires  
(including the spare (if so  
equipped)) often and always prior  
to long distance trips. The recom-  
mended tire pressure specifica-  
tions are shown on the Tire and  
Loading Information label under  
the “Cold Tire Pressure” heading.  
The Tire and Loading Information  
label is affixed to the driver side  
center pillar. Tire pressures should  
be checked regularly because:  
.
.
WARNING  
.
.
Improperly inflated tires can  
fail suddenly and cause an  
accident.  
.
Most tires naturally lose air over  
time.  
The Gross Vehicle Weight  
rating (GVWR) is located on  
the F.M.V.S.S./C.M.V.S.S. cer-  
tification label. The vehicle  
weight capacity is indicated  
on the Tire and Loading In-  
formation label. Do not load  
your vehicle beyond this ca-  
pacity. Overloading your ve-  
hicle may result in reduced  
tire life, unsafe operating  
conditions due to premature  
tire failure, or unfavorable  
.
Tires can lose air suddenly when  
driven over potholes or other  
objects or if the vehicle strikes  
a curb while parking.  
The tire pressures should be  
checked when the tires are cold.  
The tires are considered COLD after  
the vehicle has been parked for 3 or  
more hours, or driven less than 1  
mile (1.6 km) at moderate speeds.  
TPMS with Easy Fill Tire Alert pro-  
vides visual and audible signals  
8-30 Do-it-yourself  
CarManuals2.com  
Cold tire pressure: Inflate  
the tires to this pressure  
when the tires are cold.  
Tires are considered COLD  
after the vehicle has been  
parked for 3 or more hours,  
or driven less than 1 mile  
(1.6 km) at moderate  
speeds. The recommended  
cold tire inflation is set by  
the manufacturer to pro-  
vide the best balance of  
tire wear, vehicle handling,  
driveability, tire noise, etc.,  
up to the vehicle’s GVWR.  
Tire size — see “Tire label-  
ing” (P.8-33).  
Spare tire size or compact  
spare tire size (if so  
equipped)  
SDI2503  
Tire and Loading Information label  
Seating capacity: The max-  
imum number of occu-  
pants that can be seated  
in the vehicle.  
hicle loading information”  
(P.10-12).  
Original size: The size of  
the tires originally installed  
on the vehicle at the fac-  
tory.  
Vehicle load limit: See “Ve-  
Do-it-yourself 8-31  
CarManuals2.com  
4. Read the tire pressure on the  
gauge stem and compare it to  
the specification shown on the  
Tire and Loading Information  
label.  
5. Add air to the tire as needed. If  
too much air is added, press the  
core of the valve stem briefly  
with the tip of the gauge stem to  
release pressure. Recheck the  
pressure and add or release air  
as needed.  
6. Install the valve stem cap.  
7. Check the pressure of all other  
tires, including the spare (if so  
equipped).  
SDI1949  
Checking the tire pressure  
1. Remove the valve stem cap from  
the tire.  
2. Press the pressure gauge  
squarely onto the valve stem.  
Do not press too hard or force  
the valve stem sideways, or air  
will escape. If the hissing sound  
of air escaping from the tire is  
heard while checking the pres-  
sure, reposition the gauge to  
eliminate this leakage.  
3. Remove the gauge.  
8-32 Do-it-yourself  
CarManuals2.com  
COLD TIRE INFLATION  
PRESSURE  
SIZE  
230 kPa, 33 PSI  
230 kPa, 33 PSI  
240 kPa, 35 PSI  
230 kPa, 33 PSI  
230 kPa, 33 PSI  
240 kPa, 35 PSI  
215/65 R16 98H  
215/60 R17 96H  
225/45 R19 92W  
215/65 R16 98H  
FRONT ORIGINAL  
TIRE  
REAR ORIGINAL TIRE 215/60 R17 96H  
225/45 R19 92W  
SPARE TIRE (if so T145/90 D16 106M  
420 kPa, 60 PSI  
equipped)  
T135/90 D16 102M  
SDI1575  
Example  
TIRE LABELING  
Federal law requires tire manufac-  
turers to place standardized infor-  
mation on the sidewall of all tires.  
This information identifies and de-  
scribes the fundamental character-  
istics of the tire and also provides  
the tire identification number (TIN)  
for safety standard certification.  
The TIN can be used to identify  
the tire in case of a recall.  
Do-it-yourself 8-33  
CarManuals2.com  
height to width.  
4. R: The “R” stands for radial.  
5. Two-digit number (16): This  
number is the wheel or rim  
diameter in inches.  
6. Two- or three-digit number (94):  
This number is the tire’s load  
index. It is a measurement of  
how much weight each tire can  
support. You may not find this  
information on all tires because  
it is not required by law.  
7. H: Tire speed rating. You should  
not drive the vehicle faster than  
the tire speed rating.  
SDI1606  
JVM0694X  
Example  
Example (Type A) (if so equipped)  
Tire size (example: P215/60R16  
94H)  
1. P: The “P” indicates the tire is  
designed for passenger vehicles.  
(Not all tires have this informa-  
tion.)  
2. Three-digit number (215): This  
number gives the width in milli-  
meters of the tire from sidewall  
edge to sidewall edge.  
3. Two-digit number (60): This  
number, known as the aspect  
ratio, gives the tire’s ratio of  
TIN (Tire Identification Number)  
for a new tire (example: DOT XX XX  
XXX XXXX)  
1. DOT: Abbreviation for the “De-  
partment Of Transportation”.  
The symbol can be placed  
above, below or to the left or  
right of the Tire Identification  
Number.  
2. Two-digit code: Manufacturer’s  
identification mark  
3. Two-digit code: Tire size  
8-34 Do-it-yourself  
CarManuals2.com  
4. Three-digit code: Tire type code  
(Optional)  
acteristics of the tire.  
4. Four numbers represent the  
week and year the tire was built.  
For example, the numbers 3103  
means the 31st week of 2003.  
5. Four numbers represent the  
week and year the tire was built.  
For example, the numbers 3103  
means the 31st week of 2003. If  
these numbers are missing, then  
look on the other sidewall of the  
tire.  
Tire ply composition and materi-  
al  
The number of layers or plies of  
rubber-coated fabric in the tire.  
Tire manufacturers also must in-  
dicate the materials in the tire,  
which include steel, nylon, polye-  
ster, and others.  
WAI0339X  
Example (Type B) (if so equipped)  
TIN (Tire Identification  
Number) for a new tire  
(example: DOT XXX XXXXXX  
XXXX)  
Maximum permissible inflation  
pressure  
This number is the greatest  
amount of air pressure that should  
be put in the tire. Do not exceed the  
maximum permissible inflation  
pressure.  
1. DOT: Abbreviation for the “De-  
partment Of Transportation”.  
The symbol can be placed  
above, below or to the left of  
the Tire Identification Number.  
Maximum load rating  
This number indicates the maxi-  
mum load in kilograms and pounds  
that can be carried by the tire.  
When replacing the tires on the  
vehicle, always use a tire that has  
2. Three-digit code: Manufacturer’s  
identification mark  
3. Six-digit code: Descriptive code  
used to identify significant char-  
Do-it-yourself 8-35  
CarManuals2.com  
the same load rating as the factory vehicle.  
.
Always use tires of the same type,  
size, brand, construction and  
tread pattern on all four wheels.  
Failure to do so may result in a  
circumference difference be-  
tween tires on the front and rear  
axles which can cause the Vehicle  
Dynamic Control (VDC) system to  
malfunction resulting in personal  
injury or death, excessive tire  
wear and may damage the trans-  
mission, transfer case and differ-  
ential gears.  
installed tire.  
TYPES OF TIRES  
Term of “tubeless” or “tube type”  
Indicates whether the tire requires  
an inner tube (“tube type”) or not  
(“tubeless”).  
WARNING  
.
.
When changing or replacing tires,  
be sure all four tires are of the  
same type (Example: Summer, All  
Season or Snow) and construc-  
tion. A NISSAN dealer may be able  
to help you with information  
about tire type, size, speed rating  
and availability.  
Replacement tires may have a  
lower speed rating than the fac-  
tory equipped tires, and may not  
match the potential maximum  
vehicle speed. Never exceed the  
maximum speed rating of the  
tire.  
Replacing tires with those not  
originally specified by NISSAN  
could affect the proper operation  
of the TPMS.  
For additional information re-  
garding tires, refer to “Important  
Tire Safety Information” (US) or  
“Tire Safety Information” (Cana-  
da) in the Warranty Information  
Booklet.  
The word “radial”  
The word “radial” is shown, if the  
tire has radial structure.  
Manufacturer or brand name  
Manufacturer or brand name is  
shown.  
All season tires  
NISSAN specifies all season tires on some  
models to provide good performance all  
year, including snowy and icy road con-  
ditions. All Season tires are identified by  
ALL SEASON and/or M&S (Mud and Snow)  
on the tire sidewall. Snow tires have  
better snow traction than All Season tires  
and may be more appropriate in some  
areas.  
Other tire-related terminology:  
In addition to the many terms that  
are defined throughout this sec-  
tion, Intended Outboard Sidewall is  
(1) the sidewall that contains a  
whitewall, bears white lettering or  
bears manufacturer, brand and/or  
model name molding that is higher  
or deeper than the same molding  
on the other sidewall of the tire, or  
(2) the outward facing sidewall of  
an asymmetrical tire that has a  
particular side that must always  
face outward when mounted on a  
.
.
Summer tires  
NISSAN specifies summer tires on some  
models to provide superior performance  
on dry roads. Summer tire performance is  
substantially reduced in snow and ice.  
Summer tires do not have the tire trac-  
tion rating M&S on the tire sidewall.  
8-36 Do-it-yourself  
CarManuals2.com  
If you plan to operate your vehicle in  
snowy or icy conditions, NISSAN recom-  
mends the use of SNOW tires or ALL  
SEASON tires on all four wheels.  
Tire chains must be installed only on  
the front wheels and not on the rear  
wheels.  
TIRE CHAINS  
Use of tire chains may be prohibited  
according to location. Check the local  
laws before installing tire chains. When  
installing tire chains, make sure they are  
the proper size for the tires on your  
vehicle and are installed according to  
the chain manufacturer’s suggestions.  
Use only SAE Class S chains. Class “S”  
chains are used on vehicles with re-  
stricted tire to vehicle clearance. Vehicles  
that can use Class “S” chains are designed  
to meet the SAE standard minimum  
clearances between the tire and the  
closest vehicle suspension or body com-  
ponent required to accommodate the  
use of a winter traction device (tire chains  
or cables). The minimum clearances are  
determined using the factory equipped  
tire size. Other types may damage your  
vehicle. Use chain tensioners when re-  
commended by the tire chain manufac-  
turer to ensure a tight fit. Loose end links  
of the tire chain must be secured or  
removed to prevent the possibility of  
whipping action damage to the fenders  
or underbody. If possible, avoid fully load-  
ing your vehicle when using tire chains. In  
addition, drive at a reduced speed. Other-  
wise, your vehicle may be damaged and/  
or vehicle handling and performance may  
be adversely affected.  
Never install tire chains on a TEMPORARY  
USE ONLY spare tire (if so equipped).  
Snow tires  
Do not use tire chains on dry roads.  
Driving with tire chains in such conditions  
can cause damage to the various me-  
chanisms of the vehicle due to some  
overstress.  
If snow tires are needed, it is necessary to  
select tires equivalent in size and load  
rating to the original equipment tires. If  
you do not, it can adversely affect the  
safety and handling of your vehicle.  
Generally, snow tires will have lower  
speed ratings than factory equipped tires  
and may not match the potential max-  
imum vehicle speed. Never exceed the  
maximum speed rating of the tire.  
If you install snow tires, they must be the  
same size, brand, construction and tread  
pattern on all four wheels.  
For additional traction on icy roads,  
studded tires may be used. However,  
some U.S. states and Canadian provinces  
prohibit their use. Check local, state and  
provincial laws before installing studded  
tires. Skid and traction capabilities of  
studded snow tires, on wet or dry sur-  
faces, may be poorer than that of non-  
studded snow tires.  
Do-it-yourself 8-37  
CarManuals2.com  
The wheel nuts must be kept  
tightened to the specification at  
all times. It is recommended that  
wheel nuts be tightened to the  
specification at each tire rotation  
interval.  
WARNING  
.
.
After rotating the tires,  
check and adjust the tire  
pressure.  
Retighten the wheel nuts  
when the vehicle has been  
driven for 600 miles (1,000  
km) (also in cases of a flat  
tire, etc.).  
Do not include the spare tire  
(if so equipped) in the tire  
rotation.  
For additional information  
regarding tires, refer to “Im-  
portant Tire Safety Informa-  
tion” (US) or “Tire Safety  
Information” (Canada) in the  
Warranty Information Book-  
let.  
SDI1662  
SDI1663  
1. Wear indicator  
CHANGING WHEELS AND TIRES  
Tire rotation  
2. Wear indicator location  
mark  
NISSAN recommends rotating the  
tires at the specified interval shown  
in the maintenance schedule. (See  
the "9. Maintenance and sche-  
dules" section. For tire replacing  
procedure, see “Flat tire” (P.6-3).)  
Tire wear and damage  
.
.
WARNING  
.
Tires should be periodically  
inspected for wear, cracking,  
bulging or objects caught in  
the tread. If excessive wear,  
cracks, bulging or deep cuts  
are found, the tire(s) should  
As soon as possible, tighten the  
wheel nuts to the specified torque  
with a torque wrench.  
Wheel nut tightening torque:  
80 ft-lb (108 N·m)  
8-38 Do-it-yourself  
CarManuals2.com  
.
For Two-Wheel Drive (2WD) mod-  
els, if your vehicle was originally  
equipped with 4 tires that were  
the same size and you are only  
replacing 2 of the 4 tires, install  
the new tires on the rear axle.  
Placing new tires on the front  
axle may cause loss of vehicle  
control in some driving condi-  
tions and cause an accident and  
personal injury.  
If the wheels are changed for any  
reason, always replace with  
wheels which have the same off-  
set dimension. Wheels of a differ-  
ent off-set could cause prema-  
ture tire wear, degrade vehicle  
handling characteristics and/or  
interference with the brake  
discs/drums. Such interference  
can lead to decreased braking  
efficiency and/or early brake  
pad/shoe wear. See “Wheels and  
tires” (P.10-7) of this manual for  
wheel off-set dimensions.  
be replaced.  
tion” (US) or “Tire Safety  
Information” (Canada) in the  
Warranty Information Book-  
let.  
.
.
The original tires have built-  
in tread wear indicators.  
When wear indicators are  
visible, the tire(s) should be  
replaced.  
Replacing wheels and tires  
Tires degrade with age and  
use. Have tires, including the  
spare (if so equipped), over 6  
years old checked by a qua-  
lified technician, because  
some tire damage may not  
be obvious. Replace the tires  
as necessary to prevent tire  
failure and possible perso-  
nal injury.  
Improper service of the  
spare tire (if so equipped)  
may result in serious perso-  
nal injury. If it is necessary to  
repair the spare tire, it is  
recommended you visit a  
NISSAN dealer for this ser-  
vice.  
When replacing a tire, use the same size,  
tread design, speed rating and load  
carrying capacity as originally equipped.  
(See “Specifications” (P.10-7) for recom-  
mended types and sizes of tires and  
wheels.)  
.
WARNING  
.
The use of tires other than those  
recommended or the mixed use  
of tires of different brands, con-  
struction (bias, bias-belted or ra-  
dial), or tread patterns can  
adversely affect the ride, braking,  
handling, VDC system, ground  
clearance, body-to-tire clearance,  
tire chain clearance, speed-  
ometer calibration, headlight  
aim and bumper height. Some of  
these effects may lead to acci-  
dents and could result in serious  
personal injury.  
.
.
Since the spare tire (if so  
equipped) is not equipped with  
the TPMS, when a spare tire is  
mounted or a wheel is replaced,  
the TPMS will not function and  
the low tire pressure warning  
light will flash for approximately  
.
For additional information  
regarding tires, refer to “Im-  
portant Tire Safety Informa-  
Do-it-yourself 8-39  
CarManuals2.com  
If excessive tire wear is found, it is  
recommended that all four tires be re-  
placed with tires of the same size, brand,  
construction and tread pattern. The tire  
pressure and wheel alignment should  
also be checked and corrected as neces-  
1 minute. The light will remain on  
after 1 minute. Have your tires  
replaced and/or TPMS system  
reset as soon as possible. It is  
recommended you visit a NISSAN  
dealer for these services.  
Replacing tires with those not  
originally specified by NISSAN  
could affect the proper operation  
of the TPMS.  
The TPMS sensor may be da-  
maged if it is not handled cor-  
rectly. Be careful when handling  
the TPMS sensor.  
or tires could have structural  
damage and could fail without  
warning.  
.
.
The use of retread tire is not  
recommended.  
For additional information re-  
garding tires, refer to “Important  
Tire Safety Information” (US) or  
“Tire Safety Information” (Cana-  
da) in the Warranty Information  
Booklet.  
sary. It is recommended you visit  
NISSAN dealer for this service.  
a
.
.
.
Wheel balance  
Unbalanced wheels may affect vehicle  
handling and tire life. Even with regular  
use, wheels can get out of balance.  
Therefore, they should be balanced as  
required.  
All-Wheel Drive (AWD) models  
When replacing the TPMS sensor,  
the ID registration may be re-  
quired. It is recommended you  
visit a NISSAN dealer for ID regis-  
tration.  
Do not use a valve stem cap that  
is not specified by NISSAN. The  
valve stem cap may become  
stuck.  
Be sure that the valve stem caps  
are correctly fitted. Otherwise the  
valve may be clogged up with dirt  
and cause a malfunction or loss  
of pressure.  
Wheel balance service should be per-  
formed with the wheels off the vehicle.  
Spin balancing the wheels on the vehi-  
cle could lead to mechanical damage.  
For additional information regarding tires,  
refer to “Important Tire Safety Informa-  
tion” (US) or “Tire Safety Information”  
(Canada) in the Warranty Information  
Booklet.  
CAUTION  
.
Always use tires of the same size,  
brand, construction (bias, bias-  
belted or radial), and tread pat-  
tern on all four wheels. Failure to  
do so may result in a circumfer-  
ence difference between tires on  
the front and rear axles which will  
cause excessive tire wear and  
may damage the transmission,  
transfer case and rear differential  
gears.  
.
.
Care of wheels  
See “Cleaning exterior” (P.7-2) for details  
about care of the wheels.  
.
Only use spare tires (if so  
equipped) specified for each  
AWD model.  
.
Do not install  
a
damaged or  
deformed wheel or tire even if it  
has been repaired. Such wheels  
8-40 Do-it-yourself  
CarManuals2.com  
Spare tire (if so equipped)  
50 MPH (80 km/h).  
is reduced. To avoid damage to  
the vehicle, do not drive over  
obstacles. Also do not drive the  
vehicle through an automatic car  
wash since it may get caught.  
Since the spare tire is not equipped with  
the TPMS, when a spare tire is mounted  
(TEMPORARY USE ONLY), the TPMS will  
not function.  
.
.
When driving on roads covered  
with snow or ice, the TEMPORARY  
USE ONLY spare tire should be  
used on the rear wheels and  
original tire used on the front  
wheels (drive wheels). Use tire  
chains only on the front (original)  
tires.  
Tire tread of the TEMPORARY USE  
ONLY spare tire will wear at a  
faster rate than the standard tire.  
Replace the spare tire as soon as  
the tread wear indicators appear.  
Observe the following precautions if the  
TEMPORARY USE ONLY spare tire must be  
used, otherwise your vehicle could be  
damaged or involved in an accident.  
Emergency tire puncture repair kit  
(if so equipped)  
The emergency tire puncture repair kit is  
supplied to the vehicle instead of a spare  
tire. The kit must be used for temporarily  
fixing a minor tire puncture. After using  
the repair kit, it is recommended that visit  
a NISSAN dealer as soon as possible for  
tire inspection and repair/replacement.  
See “Flat tire” (P.6-3) for more details.  
WARNING  
.
The TEMPORARY USE ONLY spare  
tire should be used for emer-  
gency use. It should be replaced  
with the standard tire at the first  
opportunity to avoid possible tire  
or differential damage.  
.
.
Do not use the spare tire on other  
vehicles.  
Do not use more than one spare  
tire at the same time.  
.
.
Drive carefully while the TEMPOR-  
ARY USE ONLY spare tire is in-  
stalled. Avoid sharp turns and  
abrupt braking while driving.  
Periodically check spare tire in-  
flation pressure. Always keep the  
pressure of the TEMPORARY USE  
ONLY spare tire at 60 psi (420  
kPa, 4.2 bar).  
CAUTION  
.
.
Do not use tire chains on  
a
TEMPORARY USE ONLY spare tire.  
Tire chains will not fit properly  
and may cause damage to the  
vehicle.  
.
With the TEMPORARY USE ONLY  
spare tire installed, do not drive  
your vehicle at speeds faster than  
Because the TEMPORARY USE  
ONLY spare tire is smaller than  
the original tire, ground clearance  
Do-it-yourself 8-41  
CarManuals2.com  
MEMO  
8-42 Do-it-yourself  
CarManuals2.com  

Related Topics

Popular Owner Manuals