LIFTGATE
WARNING
.
.
Always be sure the liftgate has
been closed securely to prevent it
from opening while driving.
Do not drive with the liftgate
open. This could allow dangerous
exhaust gases to be drawn into
the vehicle. For additional infor-
mation, refer to “Exhaust gas
(carbon monoxide)” (P.5-4).
.
To help avoid risk of injury or
death through unintended opera-
tion of the vehicle and or its
systems, including entrapment
in windows or inadvertent door
lock activation, do not leave chil-
dren, people who require the
assistance of others or pets un-
attended in your vehicle. Addi-
tionally, the temperature inside a
closed vehicle on a warm day can
quickly become high enough to
cause a significant risk of injury
or death to people and pets.
WAD0090X
1. Pull the hood lock release handle
located below the instrument panel
until the hood springs up.
When closing the hood:
1. While supporting the hood, return the
support rod to its original position.
2. Locate the lever
in between the
2. Slowly lower the hood to about 8 to 12
in (20 to 30 cm) above the hood lock,
then let it drop.
hood and grille, and push the lever up
with your fingertips.
3. Raise the hood.
3. Make sure it is securely latched.
4. Remove the support rod and insert it
into the slot
.
Hold the coated part
when removing
or resetting the support rod. Avoid
direct contact with the metal parts, as
they may be hot immediately after the
engine has been stopped.
.
Always be sure that hands and
feet are clear of the door frame to
avoid injury while closing the
liftgate.
Pre-driving checks and adjustments 3-27
CarManuals2.com
English 
