Get Multifunction Displays -> Colour Screen Guide for Peugeot 1007 4 Door First Generation (2005-2009)

2

COLOUR SCREEN

General menu

When the RT4 GPS audio/telephone

is switched on, select the menu

which corresponds to the following

applications:

-

the satellite navigation system,

the guidance on the map,

the trafﬁc information,

the audio sources (radio, CD,

Jukebox, ...),

-

the telephone directories and

functions,

the conﬁguration of the screen

and the setting of the parameters

of the vehicle’s equipment,

the displaying of a video.

the vehicle diagnostics (warnings

log and status of the functions).

Controls

From the RT4 GPS audio/telephone

control panel, to select one of the

applications:

Displays on the screen

When the ignition is switched on, this

displays the following information

automatically and directly:

-



press the "MENU" button to gain

access to the general menu,

turn the dial to move the selection,

press the dial to conﬁrm the

selection,



-

the time,

the date,

the outside temperature (if there

is a risk of ice, you are warned

by a message).

or



press the "ESC" button to aban-

don the operation in progress and

return to the previous display.

Warning messages (e.g.: "Fuel level

low") and vehicle function status

messages(e.g.:"Automaticswitching

on of the headlamps activated")

may appear temporarily. These can

be cleared by pressing the "ESC"

button.

For further details concerning these

applications, refer to the RT4 part of

the "Audio and Telematics" section.

39

2

Selection of the language

Once the "Selection of the language"

menu has been selected, you gain

access to the following parameters:

-

selection of the display, infor-

mation and voice commands

language (Français, English,

Italiano, Portugues, Espanol,

Deutsch, Nederlands).

Display conﬁguration

"Configuration" menu

Once the "Display conﬁguration"

menu has been selected, you gain

access to the following parameters:



Press the "MENU" button on

the RT4 GPS audio/telephone

to gain access to the general

menu.

Turn the dial to select the

"Conﬁguration" menu, then

press it to conﬁrm.

-

selection of the palette of colours

available for the display,

setting of the brightness and bril-

liance of the display,

setting of the date and time

(12 or 24 hour mode, adjustment

of the minutes on GPS),



Once this menu has been selected,

you can gain access to the following

functions:

-

selection of the units (tempera-

ture in °Celsius or °Fahrenheit;

consumption in l/100 km or mpg

or km/l).

Deﬁne the vehicle parameters

Once the "Deﬁne the vehicle param-

eters" menu has been selected, you

can activate or deactivate certain

driving and comfort equipment:

Sounds

-

wiper linked with reverse gear

(refer to the "Visibility" section),

"follow-me-home" lighting and

duration (refer to the "Visibility"

section).

Once the "Sounds" menu has been

selected, you gain access to the

following parameters:

-

setting of the voice commands,

setting of the voice synthesiser

(volume of the instructions

and other messages, male or

female),

-

activation of the auxiliary input

AUX.

40

2

Example: setting the duration of the

"follow-me-home" lighting.

The RT4 GPS audio/tele-

phone must reinitialise and

restart in order to change

the voice used by the voice

synthesiser (male or female)

or the language used by the

system.



Turnthedialtoselectthe"Lighting

conﬁguration"menu, then press it

to conﬁrm.

For safety reasons, it is im-

perative that conﬁguration of

the multifunction displays by

the driver takes place when

stationary.



Select the line "Duration of the

"follow-me-home" lighting" then

conﬁrm.



Select the duration then press

the dial.

Turn the dial to set the value

required (15, 30 or 60 seconds),

then press the dial.



Select the "OK" box, then conﬁrm.

41

Multifunction Displays -> Colour Screen for Your Peugeot 1007 4 Door First Generation (2005-2009)

Related Topics

Multifunction Displays