Multifunction Displays -> Monochrome Display A for Your Peugeot 1007 4 Door First Generation (2005-2009)

2
MONOCHROME DISPLAY A  
(without RD4 audio equipment)  
Parameter configuration  
There are three display control buttons:  
-
-
-
"ESC" to abandon the operation  
in progress,  
"MENU" to scroll through the  
menus or sub-menus,  
"OK" to select the menu or sub-  
menu required.  
General menu  
Press the "MENU" button to scroll  
through the various menus of the  
general menu:  
-
-
-
-
-
vehicle configuration,  
options,  
display settings,  
languages,  
units.  
Press the "OK" button to select the  
menu required.  
Presentation  
This displays the following information:  
-
-
-
the time,  
the date,  
the outside temperature (this  
flashes if there is a risk of ice),  
-
the status of the accesses  
(doors, boot, ...),  
-
the warning messages (e.g.: "Anti-  
pollution system faulty") or infor-  
mation messages (e.g.: "Auto  
lights on"), displayed temporarily,  
can be cleared by pressing the  
"ESC" button,  
-
the trip computer (see corre-  
sponding section).  
31  
2
Display settings  
Languages  
Once the "Display settings" menu has  
been selected, you can gain access  
to the following settings:  
Oncethe"Languages"menuhasbeen  
selected,youcanchangethelanguage  
used by the display (Français, Italiano,  
Nederlands, Portugues, Portugues-  
Brasil, Deutsch, English, Espanol).  
-
-
-
-
-
-
year,  
month,  
day,  
hour,  
minutes,  
12 or 24 hour mode.  
Vehicle configuration  
Once the "Vehicle configuration"  
menu has been selected, you can  
activate or deactivate the following  
equipment:  
Units  
Once the "Units" menu has been  
selected, you can change the units  
of the following parameters:  
-
-
wiper linked with reverse gear,  
"follow-me-home" lighting.  
-
-
temperature (°C or °F),  
fuel consumption (l/100, mpg or  
km/l).  
Options  
Once the "Options" menu has been  
selected, you can start diagnostics of  
the status of the equipment (active,  
not active, faulty).  
Once you have selected a setting,  
press the "OK" button to change its  
value.  
Wait for approximately ten sec-  
onds without any action to allow the  
changed data to be recorded or press  
the "ESC" button to cancel.  
The display then returns to the nor-  
mal display.  
For safety reasons, it is im-  
perative that configuration of  
the multifunction displays by  
the driver takes place when  
stationary.  
32  
2
MONOCHROME DISPLAY A  
Vehicle configuration  
General menu  
Once the "Vehicle configuration"  
menu has been selected, you can  
activate or deactivate the following  
equipment:  
Press the "MENU" button to gain  
access to the general menu, then  
press the "" or "" buttons to scroll  
through the following items:  
-
rear wiper linked with reverse  
gear,  
"follow-me-home" lighting.  
-
-
-
-
-
-
radio-CD,  
vehicle configuration,  
options,  
display settings,  
languages,  
units.  
-
Presentation  
This displays the following informa-  
tion, via the RD4 audio equipment  
control keypad:  
Press the "OK" button to select the  
menu required.  
-
-
-
the time,  
the date,  
the outside temperature (this  
flashes if there is a risk of ice),  
RadioꢀCD  
Options  
-
-
-
the audio source displays (radio,  
CD, ...),  
the status of the accesses  
(doors, boot, ...),  
the warning messages (e.g.: "Anti-  
pollution system faulty") or infor-  
mation messages (e.g.: "Auto  
lights on"), displayed temporarily,  
can be cleared by pressing the  
"ESC" button,  
With the RD4 audio equipment  
switched on, once the "Radio-CD"  
menu has been selected, you can  
activate or deactivate the functions  
linked with the use of the radio (RDS  
following, REG mode), the CD or the  
CD changer (introscan, random play,  
CD repeat).  
Once the "Options" menu has been  
selected, you can start diagnostics of  
the status of the equipment (active,  
not active, faulty).  
-
the trip computer (see corre-  
sponding section).  
33  
2
Display settings  
Languages  
Once the "Display settings" menu has  
been selected, you can gain access  
to the following settings:  
Oncethe"Languages"menuhasbeen  
selected,youcanchangethelanguage  
used by the display (Français, Italiano,  
Nederlands, Portugues, Portugues-  
Brasil, Deutsch, English, Espanol).  
-
-
-
-
-
-
year,  
month,  
day,  
hour,  
minutes,  
12 or 24 hour mode.  
Units  
Once the "Units" menu has been  
selected, you can change the units  
of the following parameters:  
-
-
temperature (°C or °F),  
fuel consumption (l/100, mpg or  
km/l).  
Once you have selected a setting,  
press the "" or "" buttons to  
change its value.  
Press the "" or "" buttons to  
move to the previous or next setting  
respectively.  
Press the "OK" button to record  
the change and return to the normal  
display or press the "ESC" button to  
cancel.  
For safety reasons, it is im-  
perative that configuration of  
the multifunction displays by  
the driver takes place when  
stationary.  
34