Get Visibility Guide for Peugeot 1007 4 Door First Generation (2005-2009)

5

Front fog lamps and rear fog

lamp

Rotate the ring B or C forwards to

switch on and backwards to switch

off. The status is displayed by the in-

dicator light on the instrument panel.

Vehicles ﬁtted with a rear fog

lamp (ring B)

Dipped/Main beam change

Pull the stalk fully towards you.

LIGHTS STALK

Rear fog lamp

Front and rear lights

This can only operate with the dipped

and main beam headlamps.

Selection is by turning ring A.

Lights on

With the ignition off, a buzzer sounds

when the driver’s door is opened, if

you have left your lights on.

If the dipped headlamps remain

on, with the ignition off, they will be

switched off automatically after thirty

minutes maximum to prevent dis-

charging of the battery.

Vehicles ﬁtted with front fog

lamps and a rear fog lamp (ring C)

Lights off

Front fog lamps (1st rotation

of the ring forwards)

Automatic switching on

of lights.

These operate with the side lights

and dipped headlamps.

Side lights

Dipped/main beam

headlamps

86

5

Notes:

Direction indicators (ﬂashers)

When the main beam headlamps are

switched on, the front fog lamps are

switched off.

When the lights are switched off au-

tomatically, with the engine running,

the front fog lamps and the side lights

will remain on (turn the ring back-

wards to switch the fog lamps off).

Left: downwards.

Right: upwards.

Follow me home lighting

Leaving the dipped headlamps on

temporarily, after switching off the ig-

nition, facilitates the driver’s exit from

the vehicle when the light is poor.

Front fog lamps and rear

fog lamp (2nd rotation of

the ring forwards)

Note: to switch off the rear fog lamp

and the front fog lamps, turn the ring

backwards twice in succession.

Switching on



With the ignition off, "ﬂash" the

headlamps.



A second "headlamp ﬂash"

switches the function off.

Switching off

The follow me home lighting is

switched off automatically following

locking of the doors, after a speciﬁed

time.

When the lights are switched

off automatically or when

the dipped headlamps are

switched off manually, with

the engine running, the fog

lamps and the side lights will

remain on.

In good or rainy weather, both day

and night, the front fog lamps and

the rear fog lamp are dazzling and

are prohibited.

Do not forget to switch them off when

they are no longer needed.

87

5

In foggy weather or in

snow, the brightness

sensor can detect sufﬁ-

cient light, the lights will

not come on automati-

cally.

Operating fault

Automatic switching on of

lights

If the brightness sensor does not

function correctly, the lights come on

accompanied by the service warning

light, an audible signal and a mes-

sage on the multifunction display.

The side lights and dipped beam

headlamps switch on automatically if

the light is poor and when the wind-

screen wipers operate continuously.

They switch off when the light be-

comes bright enough or the wind-

screen wipers are switched off.

Do not cover the brightness sen-

sor, coupled with the rain sensor,

located in the centre of the wind-

screen behind the interior mirror.

It is used for automatic switching

on of the lights.

Contact a PEUGEOT dealer.

Do not cover the brightness

sensor, coupled with the rain

sensor, located in the centre

of the windscreen behind

the interior mirror; the as-

sociated functions would no

longer be controlled.

Activation

Turn the lighting control to the

"AUTO" position.

Coupling with the Follow Me

Home lighting

The association with the automatic

lighting function provides the follow

me home lighting with the following

additional options:

Disarming

Turn the lighting control to a position

other than "AUTO".

Daytime lights*

-

selection of maintaining of the

lighting for a duration of 15, 30

or 60 seconds in the vehicle pa-

rameters of the multifunction dis-

play conﬁguration menu (except

in the case of the monochrome

display A for which the duration

is pre-set),

On vehicles which are equipped with

daytime lights, the dipped headlamps

come on when the vehicle is started.

Operating fault

If the brightness sensor does not

function correctly, the lights come on

accompanied by the service warning

light, an audible signal and a mes-

sage on the multifunction display.

This warning light comes on

on the instrument panel.

-

automatic activation of the fol-

low me home lighting when the

automatic lighting function is in

operation.

The instruments and controls (instru-

ment panel, multifunction display,

air conditioning control panel, ...)

are only lit on switching to the auto-

matic switching on of the lights mode

or when the lights are switched on

manually.

Consult a PEUGEOT dealer.

* According to country.

88

5

In foggy weather or in

snow, the brightness

sensor can detect sufﬁ-

cient light, the lights will

not come on automati-

cally.

Operating fault

Automatic switching on of

lights

If the brightness sensor does not

function correctly, the lights come on

accompanied by the service warning

light, an audible signal and a mes-

sage on the multifunction display.

The side lights and dipped beam

headlamps switch on automatically if

the light is poor and when the wind-

screen wipers operate continuously.

They switch off when the light be-

comes bright enough or the wind-

screen wipers are switched off.

Do not cover the brightness sen-

sor, coupled with the rain sensor,

located in the centre of the wind-

screen behind the interior mirror.

It is used for automatic switching

on of the lights.

Contact a PEUGEOT dealer.

Do not cover the brightness

sensor, coupled with the rain

sensor, located in the centre

of the windscreen behind

the interior mirror; the as-

sociated functions would no

longer be controlled.

Activation

Turn the lighting control to the

"AUTO" position.

Coupling with the Follow Me

Home lighting

The association with the automatic

lighting function provides the follow

me home lighting with the following

additional options:

Disarming

Turn the lighting control to a position

other than "AUTO".

Daytime lights*

-

selection of maintaining of the

lighting for a duration of 15, 30

or 60 seconds in the vehicle pa-

rameters of the multifunction dis-

play conﬁguration menu (except

in the case of the monochrome

display A for which the duration

is pre-set),

On vehicles which are equipped with

daytime lights, the dipped headlamps

come on when the vehicle is started.

Operating fault

If the brightness sensor does not

function correctly, the lights come on

accompanied by the service warning

light, an audible signal and a mes-

sage on the multifunction display.

This warning light comes on

on the instrument panel.

-

automatic activation of the fol-

low me home lighting when the

automatic lighting function is in

operation.

The instruments and controls (instru-

ment panel, multifunction display,

air conditioning control panel, ...)

are only lit on switching to the auto-

matic switching on of the lights mode

or when the lights are switched on

manually.

Consult a PEUGEOT dealer.

* According to country.

88

5

HEADLAMP ADJUSTMENT

WINDSCREEN WIPER STALK

To avoid causing a nuisance to other

road users, the height of the head-

lamps should be adjusted in relation

to the load in the vehicle.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 4 people.

2. 4 people + maximum authorised

load.

3. Driver + maximum authorised

load.

The initial setting is position "0".

Front windscreen wiper with

intermittent wipe

Front windscreen wiper with

automatic wipe

2

1

I

Fast wipe (heavy rain).

Normal wipe (moderate rain).

Intermittent wipe.

2

1

Fast wipe (heavy rain).

Normal wipe (moderate

rain).

I

0

Intermittent wipe.

Off.

AUTO Automatic or single wipe

0



Off.

Single wipe (press downwards).

In the Intermittent position, the wip-

ing speed is in proportion to the ve-

hicle speed.

(press downwards).

In the Intermittent position, the wiping

speed is in proportion to the speed of

the vehicle.

In AUTO mode, the wiping speed is

in proportion to the intensity of the

rainfall. The ﬁrst press of the stalk

downwards activates the automatic

wipe.

Subsequent presses trigger a single

wipe.

89

5

HEADLAMP ADJUSTMENT

WINDSCREEN WIPER STALK

To avoid causing a nuisance to other

road users, the height of the head-

lamps should be adjusted in relation

to the load in the vehicle.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 4 people.

2. 4 people + maximum authorised

load.

3. Driver + maximum authorised

load.

The initial setting is position "0".

Front windscreen wiper with

intermittent wipe

Front windscreen wiper with

automatic wipe

2

1

I

Fast wipe (heavy rain).

Normal wipe (moderate rain).

Intermittent wipe.

2

1

Fast wipe (heavy rain).

Normal wipe (moderate

rain).

I

0

Intermittent wipe.

Off.

AUTO Automatic or single wipe

0



Off.

Single wipe (press downwards).

In the Intermittent position, the wip-

ing speed is in proportion to the ve-

hicle speed.

(press downwards).

In the Intermittent position, the wiping

speed is in proportion to the speed of

the vehicle.

In AUTO mode, the wiping speed is

in proportion to the intensity of the

rainfall. The ﬁrst press of the stalk

downwards activates the automatic

wipe.

Subsequent presses trigger a single

wipe.

89

5

Special position of the front

windscreen wiper

In the minute following switching off

of the ignition, any action on the stalk

positions the wipers in the centre of

the windscreen.

Do not cover the rain sen-

sor located on the wind-

screen behind the interior

mirror.

Automatic windscreen wipers

In AUTO mode, the windscreen wip-

ers operate automatically and adapt

their speed to the intensity of the

rainfall.

When using an automatic car wash,

switch off the ignition.

In winter, it is advisable to wait for the

windscreen to completely clear of ice

before operating the automatic wipe.

This action enables you to position

the wiper blades for winter parking,

cleaning or replacement (See corre-

sponding section).

To park the wipers after this has

been done, switch on the ignition and

operate the stalk.

Activation

Activation of the function is accom-

panied by a message on the multi-

function display.

The automatic windscreen wipers

function must be reactivated if the

ignition has been switched off for

more than one minute, by press-

ing the stalk downwards.

Rear windscreen wiper

Turn ring A to the ﬁrst notch

for intermittent wiping.

Windscreen wash

When reverse gear is engaged, if the

windscreen wipers are in operation,

the rear wiper will start wiping.

Pull the wiper stalk towards you. The

windscreen wash, then the wind-

screen wipers, operate for a speci-

ﬁed time.

Deactivation

Deactivation of the function is ac-

companied by a message on the

multifunction display.

The function is deactivated when the

windscreen wipers stalk is moved to

position I, 1 or 2.

In the event of malfunction of the

automatic windscreen wipers, the

windscreen wipers will operate in in-

termittent mode.

Contact a PEUGEOT dealer to have

the system checked.

To activate or deactivate

this function, go to the

multi-function

conﬁguration menu.

display

Low wash-wipe/headlamp wash

ﬂuid level

On vehicles ﬁtted with headlamp

washers, this is indicated by an audi-

ble signal or a message on the multi-

function display.

This information is given each time

the front or rear wash-wipe control is

operated, until the reservoir is ﬁlled.

When you stop, ﬁll the wash-wipe/

headlamp wash reservoir or have it

ﬁlled.

If there is a signiﬁcant ac-

cumulation of snow or ice

and when using a bicycle

carrier on the tailgate, deactivate the

automatic rear wiping by going to the

multifunction display conﬁguration

menu.

Rear windscreen wash

Turn ring A past the ﬁrst

notch; the windscreen wash

then the windscreen wiper

operate for a ﬁxed period.

90

5

Special position of the front

windscreen wiper

In the minute following switching off

of the ignition, any action on the stalk

positions the wipers in the centre of

the windscreen.

Do not cover the rain sen-

sor located on the wind-

screen behind the interior

mirror.

Automatic windscreen wipers

In AUTO mode, the windscreen wip-

ers operate automatically and adapt

their speed to the intensity of the

rainfall.

When using an automatic car wash,

switch off the ignition.

In winter, it is advisable to wait for the

windscreen to completely clear of ice

before operating the automatic wipe.

This action enables you to position

the wiper blades for winter parking,

cleaning or replacement (See corre-

sponding section).

To park the wipers after this has

been done, switch on the ignition and

operate the stalk.

Activation

Activation of the function is accom-

panied by a message on the multi-

function display.

The automatic windscreen wipers

function must be reactivated if the

ignition has been switched off for

more than one minute, by press-

ing the stalk downwards.

Rear windscreen wiper

Turn ring A to the ﬁrst notch

for intermittent wiping.

Windscreen wash

When reverse gear is engaged, if the

windscreen wipers are in operation,

the rear wiper will start wiping.

Pull the wiper stalk towards you. The

windscreen wash, then the wind-

screen wipers, operate for a speci-

ﬁed time.

Deactivation

Deactivation of the function is ac-

companied by a message on the

multifunction display.

The function is deactivated when the

windscreen wipers stalk is moved to

position I, 1 or 2.

In the event of malfunction of the

automatic windscreen wipers, the

windscreen wipers will operate in in-

termittent mode.

Contact a PEUGEOT dealer to have

the system checked.

To activate or deactivate

this function, go to the

multi-function

conﬁguration menu.

display

Low wash-wipe/headlamp wash

ﬂuid level

On vehicles ﬁtted with headlamp

washers, this is indicated by an audi-

ble signal or a message on the multi-

function display.

This information is given each time

the front or rear wash-wipe control is

operated, until the reservoir is ﬁlled.

When you stop, ﬁll the wash-wipe/

headlamp wash reservoir or have it

ﬁlled.

If there is a signiﬁcant ac-

cumulation of snow or ice

and when using a bicycle

carrier on the tailgate, deactivate the

automatic rear wiping by going to the

multifunction display conﬁguration

menu.

Rear windscreen wash

Turn ring A past the ﬁrst

notch; the windscreen wash

then the windscreen wiper

operate for a ﬁxed period.

90

5

Permanently off.

Permanently on.

In the permanently on posi-

tion, there are different dura-

tions of lighting:

-

when the ignition is off,

approximately ten minutes,

in energy economy mode,

approximately thirty seconds,

when the engine is running, no limit.

COURTESY LIGHT

Boot light

1. Front courtesy light

2. Map reading lights

The boot light is located in the left

boot trim.

It comes on automatically when the

boot is opened and switches of auto-

matically when the boot is closed.

Map reading lights

Front courtesy light

In this position, the courtesy

light comes on gradually:

With the ignition on, press

the corresponding switch 2.

-

when the vehicle is unlocked,

when the key is removed from

the ignition,

-

when the remote control locking

button is pressed, in order to

locate your vehicle.

It switches off gradually:

-

when the vehicle is locked,

when the ignition is switched on,

30 seconds after the last door is

closed.

91

Visibility for Your Peugeot 1007 4 Door First Generation (2005-2009)

Related Topics