51
YOUR 106 IN DETAIL
1
2
4
3
Rear head restraints*
Rear seats
To tilt the seat:
These have one position (high) for
when they are in use and another
position (low) for storing. They are
removable.
To lower, press the lug.
To remove, pull upwards as far as
the stop and press the lug.
– Pull the rear of the seat 1 and tilt it against the front seats.
– Place the seat-belt in the hook 2 (3-door) or on the top of the seat-back 4
(5-door).
– Unlock the seat-back by using the controls 3 on the sides.
– Tilt the seat-back 4.
To remove the rear seat cushions , tilt the seat cushion to 45° and remove it.
To replace the seat cushion: position it on the front fixing brackets and lower it to
the normal position.
When folding the rear seats, always start with the seat cushion, never the
seat back (risk of damage).
Warning: never drive with the head
restraints removed; they must be in
place and correctly adjusted.
* According to specification.
06-05-2002
English 