56
YOUR 106 IN DETAIL
Starting a petrol engine*
Starting a diesel engine
Never race a cold engine.
Never run the engine in
an enclosed space.
Do not press the accelerator pedal.
Operate the starter without relea-
sing the key until the engine starts.
Engine cold:
Do not press the accelerator pedal.
Turn the key to position “M”, the
pre-heat warning lamp lights.
Wait until the warning lamp goes
out, then operate the starter in posi-
tion “D” until the engine runs
smoothly.
If the engine cannot be
stopped using the igni-
tion key, press the brake pedal,
engage a gear and release the
clutch in order to stall the engi-
ne.
Do not modify the steering
lock in any way.
Engine hot:
Do not press the accelerator pedal.
Operate the starter.
If the engine stops or does not start
immediately, always wait a few
seconds before trying again using
the pre-heater.
NOTE: according to specifica-
tion, the pre-heat warning
lamp does not light if the engi-
ne is sufficiently hot.
* According to specification
06-05-2002
English 