COMFORT
3
REAR SEATS
REAR HEAD RESTRAINTS*
The rear head restraints can be
removed and have two positions:
- high, position for use.
- low, storage position.
To raise the head restraint, pull it
upwards.
To lower it, press lug A then the head
restraint.
To remove it:
- tilt the seat back slightly,
- move the head restraint to the high
position,
Folding the back of the bench
seat:
The seat back is folded from the rear
of the vehicle, with the boot open:
- check that the seat belt is posi-
tioned correctly on the side of the
seat back to avoid damaging it,
- place the head restraints in the
low position (see "rear head re-
straints"),
- while folding the seat back, pull the
strap(s) A, located behind the seat
back.
Returning the back of the
bench seat to its initial
position:
- fold the seat back rearwards and
secure it on the mounting B.
Take care not to trap the seat belts,
in particular between the seat back
and the mounting B.
- check that the back of the bench
seat is secured correctly.
- press lug A pulling the head re-
straint upwards at the same time.
To refit it:
- tilt the seat back slightly,
- engage the rods of the head re-
straint in the openings.
To reach the low position, press
lug A.
* According to version.
37
English 