Get Practical Information -> Changing a Wheel Guide for Peugeot 107 4 Door 2005-2014

PRACTICAL INFORMATION

Tools

CHANGING A WHEEL

The following tools are installed in a

carrier, located in the centre of the

spare wheel:

1. Wheelbrace

2. Jack with handle

3. Removable towing eye

Parking the vehicle

 As far as possible, immobilise the

vehicle on level, stable, non-slip-

pery ground.

Access to the spare wheel and

the jack in the boot

 Apply the handbrake, switch

off the ignition and engage ﬁrst

gear, reverse or position N for the

"2 Tronic" gearbox.

 Remove the carpet then the plas-

tic cover using the handle.

 If necessary, chock the wheel di-

agonally opposite the wheel to be

changed.

Tyre pressure

This is indicated on the label posi-

tioned on the interior pillar of the left

door, see "Identiﬁcation".

PRACTICAL INFORMATION

Removing the wheel

Reﬁtting the wheel

 Remove the trim.

 Position the wheel.

 Release the wheel bolts using the

wheelbrace 1.

 Screw in the bolts fully by hand.

 Place the jack 2 in contact with one

of the four locations A provided on

the underframe, the one closest to

the wheel to be changed.

 Extend the jack 2 until its base

is in contact with the ground. En-

sure that the centreline of the jack

base is directly below the location

A used.

 Lift the vehicle.

 Remove the bolts and detach the

wheel.

 Pre-tighten* using the wheelbrace 1.

* If your vehicle is ﬁtted with alloy wheels, when tightening the bolts it is normal

to notice that the washers do not come into contact with the spare wheel. It is

ﬁxed securely.

Practical Information -> Changing a Wheel for Your Peugeot 107 4 Door 2005-2014

Related Topics

Practical Information

Popular Owner Manuals

Latest Owner Manuals