Lighting and visibility
With the dipped beams on, push the control
forwards to switch on the main beams. Pull the
control towards you to return to dipped beams.
Front foglamps and rear
foglamp
In good or rainy weather, both day and
night, using the front foglamps and the
rear foglamp is prohibited. In these
situations, the power of their beams may
dazzle other drivers. They should only be
used in fog or falling snow.
In these weather conditions, it is your
responsibility to switch on the foglamps
and dipped headlamps manually as the
sunshine sensor may detect sufficient
light.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash"), for as long as
the stalk is kept pulled.
Turn and release the ring:
F forwards once to switch on the rear
foglamp,
F forwards a second time to switch on the
front foglamps,
F backwards once to switch off the front
foglamps,
F backwards a second time to switch off the
rear foglamp.
If the lighting is switched off automatically
(version with AUTO lighting) or the dipped
beams are switched off manually, the foglamps
and sidelamps remain on.
Displays
Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is switched on.
Do not forget to turn off the front foglamps
and the rear foglamp as soon as they are
no longer necessary.
4
Selection ring for the
foglamps
F Turn the ring backwards and release it to
turn off all the lamps.
Switching off the lamps when the
ignition is switched off
When switching off the ignition, all of the
lamps turn off immediately, except for
dipped beam if guide-me-home lighting is
activated.
Switching on the lighting after the
ignition is switched off
To reactivate the lighting control, rotate
the ring to the 0 position – lamps off, then
to the desired position.
On opening the driver's door a temporary
audible signal warns the driver that the
lighting is on.
The foglamps operate when the dipped or main
beams are on.
47
English 
