In the event of a breakdown
► Pull the bulb to remove it.
► Replace the bulb.
When refitting the bulb holder in its housing,
press until you hear a click which means it is
locked in place.
When changing the bulb within a few
minutes of switching off the ignition, take
care not to touch the exhaust - risk of burns!
Rear lamps
Fuses
Direction indicators
Changing a fuse
Rapid flashing of a direction indicator
lamp (left or right) indicates that one of
the bulbs on the corresponding side has
failed.
All work must be carried out only by a
PEUGEOT dealer or a qualified workshop
The replacement of a fuse by a third party
could cause a serious malfunction of the
vehicle.
1. Sidelamps / Daytime running lamps (LED)
2. Brake lamps (LED)
3. Reversing lamps (LED)
4. Direction indicators (LED)
Installing electrical accessories
The vehicle's electrical system is
designed to operate with standard or optional
equipment.
Foglamps (P21W)
Before fitting other electrical equipment
or accessories to your vehicle, contact a
PEUGEOT dealer or a qualified workshop.
► Remove the protective cover by pulling the
tab.
► Turn the bulb holder anti-clockwise.
► Pull the bulb and bulb holder assembly
backwards.
PEUGEOT accepts no responsibility for
the cost incurred in repairing the vehicle
or for rectifying malfunctions resulting from
the installation of accessories not supplied or
not recommended by PEUGEOT and not
installed in accordance with its
recommendations, in particular when the
combined power consumption of all of the
additional equipment connected exceeds 10
milliamperes.
These bulbs are replaced from outside the rear
bumper.
► Pass your hand under the bumper.
► Disconnect the connector.
► Turn the bulb holder a quarter turn and
remove it.
► Replace the bulb.
Amber coloured bulbs must be replaced
by bulbs with identical specifications and
colour.
► Turn the bulb a quarter turn and replace it.
172
English