Lighting and visibility
To avoid dazzling other road users, the height
of these headlamp beams must be adjusted
according to the load in the vehicle.
Parking lamps
Automatic illumination of
lamps
(Depending on version)
Vehicle side marking by lighting the sidelamps
on the traffic side only.
0
(Initial setting)
With the lighting control stalk in the “AUTO”
position and if a low level of exterior brightness
is detected by the rain/sunshine sensor, the
number plate lamps, sidelamps and dipped
beam headlamps are switched on automatically,
without any action on the part of the driver. They
may also come on if rain is detected, at the same
time as automatic operation of the windscreen
wipers.
Driver only or driver + front passenger
5 people
5 people + load in the boot
Driver only + load in the boot
► Within one minute after switching off the
ignition, operate the lighting control stalk
upwards or downwards, depending on the side
of the traffic (e.g. when parking on the right, push
the lighting control stalk down to light up on the
left).
This is confirmed by an audible signal and the
lighting of the corresponding direction indicator
lamp on the instrument panel.
1
2
3
4 5 6 Not used
This information is provided as a guide only.
Depending on version, the unused positions may
be required.
As soon as the brightness returns to a sufficient
level or after the windscreen wipers are switched
off, the lamps are switched off automatically.
► To switch off the parking lamps, return the
lighting control stalk to the central position.
Automatic adjustment of
the Full LED technology
headlamps
This system automatically adjusts the height of
the headlamp beams according to the load in the
vehicle.
In the event of a malfunction, this warning
lamp lights up on the instrument panel,
accompanied by the display of a message and
an audible signal.
Malfunction
Headlamp beam height
adjustment
In the event of a malfunction of the rain/
sunshine sensor, the vehicle’s lamps
come on and this warning lamp is displayed on
the instrument panel, accompanied by an
audible signal and/or the display of a message.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Manual headlamp
adjustment
The system places the headlamp beams in the
lowest position.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Do not cover the rain/sunshine sensor
located at the top centre of the
windscreen behind the interior rear view
mirror; the associated functions would no
longer be controlled.
Do not touch the LED or Full
LED technology headlamps - risk of
electrocution!
In fog or snow, the rain/sunshine sensor
may detect sufficient light. For this
58
English