Practical information
If a telephone call is in progress at the
time, it will be maintained for around 10
minutes via the audio system’s hands-free
system.
Removing
Exiting the mode
These functions are automatically reactivated the
next time the vehicle is used.
To restore the use of these functions
For the central screen with vertical grille
► Insert a flat screwdriver into the holes to
reach the upper fixing brackets of the central
screen.
► Press on each upper fixing bracket in turn to
release them from the grille.
immediately, start the engine and let it run:
– For less than 10 minutes, to use the
equipment for approximately 5 minutes.
– For more than 10 minutes, to use the
equipment for approximately 30 minutes.
Let the engine run for the specified duration to
ensure that the battery charge is sufficient.
To recharge the battery, avoid repeatedly or
continuously restarting the engine.
For the side screen
► Insert a finger into the notch in the lower part
of the side screen.
► Pull towards you to unclip the unit.
► Pull towards you to unclip the unit.
Energy economy mode
This system manages the duration of use of
certain functions, in order to conserve a sufficient
level of charge in the battery with the ignition off.
After switching off the engine and for a maximum
cumulative period of around 30 minutes, you can
continue to use functions such as the audio and
telematics system, dipped beam headlamps or
courtesy lamps.
A flat battery prevents the engine from
starting.
For more information on the 12 V battery,
refer to the corresponding section.
For the central screen with horizontal grille
► Press the upper fixing brackets to release
them from the grille.
► Gently tilt the central screen downwards.
► Pull towards you to unclip the unit.
Load reduction mode
This system manages the use of certain
functions according to the level of charge
remaining in the battery.
When the vehicle is being driven, the load
reduction function temporarily deactivates certain
Selecting the mode
A confirmation message is displayed when
energy economy mode is entered, and the active
functions are placed on standby.
152
English