Practical information -> Snow chains for Your Peugeot 2008 SUV Second Generation (2019-2025)

Practical information  
► Fit the snow chains following the instructions  
provided by the manufacturer.  
► Move off gently and drive for a few moments,  
without exceeding 31 mph (50 km/h).  
► Stop the vehicle and check that the snow  
chains are correctly tightened.  
Before any operation, ensure that the  
engine is off and the cooling fan has  
stopped.  
Snow chains  
7
In wintry conditions, snow chains improve  
traction as well as the behaviour of the vehicle  
when braking.  
It is essential to remove them when:  
– the outside temperature exceeds  
10°C.  
– recovery is in progress.  
– the speed is above 75 mph (120 km/h).  
Snow chains must be fitted only to the  
front wheels. They must never be fitted to  
"space-saver" type spare wheels.  
It is strongly recommended that you  
practise fitting the snow chains on a level  
and dry surface before setting off.  
Observe the legislation in force in your  
country relating to the use of snow  
chains and maximum authorised speeds.  
Avoid driving with snow chains on roads  
that have been cleared of snow to avoid  
damaging the vehicle's tyres and the road  
surface. If the vehicle is fitted with alloy  
wheels, check that no part of the chain or its  
fixings is in contact with the wheel rim.  
Fitting  
Only use chains that have been designed to be  
fitted on the type of wheel on the vehicle:  
Original tyre size  
215/65R16  
Maximum link size  
9 mm (Polaire XP9)  
9 mm (Polaire XP9)  
215/60R17  
Very cold climate screen  
(Depending on country of sale)  
This removable device prevents the  
accumulation of snow around the radiator  
cooling fan.  
It consists of a first element for the upper part  
of the front grille and a second element for the  
lower part.  
215/55R18  
10 mm  
(Polaire 0112)  
For more information on snow chains, contact a  
PEUGEOT dealer or a qualified workshop.  
► Hold the side screen in front of the lower left  
grille of the bumper.  
► First insert the lower fixing brackets into the  
bumper.  
► Tilt the side screen upwards until the side and  
then upper fixing brackets click into the bumper.  
► Check that the unit is firmly held by pressing  
around the edges.  
Repeat the same process to fit the central  
screen into the upper grille of the bumper.  
Installation tips  
To t the snow chains during a journey, stop  
the vehicle on a flat surface at the side of the  
road.  
► Apply the parking brake and position any  
wheel chocks under the wheels to prevent  
movement of the vehicle.  
In case of difficulty with installation/  
removal  
Contact a PEUGEOT dealer or a qualified  
workshop.  
151