Safety
An incorrectly installed child seat in a
vehicle compromises the child's safety in
the event of an accident.
"RÖMER Baby-Safe and its ISOFIX base"
"RÖMER Duo Plus ISOFIX"
(size category: B1)
(size category: E)
Strictly observe the fitting instructions
provided in the user guide supplied with the
child seat.
Group 0+: from birth to 13 kg
Group 1: from 9 to 18 kg
For information about the options for
fitting ISOFIX child seats in your vehicle,
refer to the summary table.
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
Suitable for forward-facing installation only.
Attached to rings A and ring B, referred to as
TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining,
lying down.
This child seat can also be used in seat
positions not equipped with ISOFIX
mountings. In this case, it must be secured to
the vehicle's seat by the three-point seat belt.
Adjust the front seat of the vehicle so that the
child's feet do not touch the backrest.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
Recommended ISOFIX child
seats
Also consult the user guide from the child
seat’s manufacturer to find out how to
install and remove the seat.
i-Size child seats
i-Size child seats have two latches that are anchored to the two rings A.
These i-Size child seats also have:
– either an upper strap that is attached to ring B.
– or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.
Their role is to prevent the child seat from tipping forward in the event of a collision.
For more information on the ISOFIX mountings, refer to the corresponding section.
80
English