Get Safety -> ISOFIX child seats Guide for Peugeot 2008 SUV Second Generation (2019-2025)

Safety

– Two rings A, located between the vehicle seat

backrest and cushion.

Groups 2 and 3: from 15 to 36 kg

"GRACO Booster"

* Depending on country of sale.

Rear seats

The child is restrained by the seat belt.

Only suitable for installation on the front

passenger seat or on the rear side seats.

This system prevents the child seat from tipping

forwards in the event of a front impact.

This ISOFIX mounting system provides fast,

reliable and safe ﬁtting of the child seat in the

vehicle.

To secure the child seat to the TOP TETHER:

► Remove and stow the head restraint before

installing the child seat on this seat (reﬁt it once

the child seat has been removed).

The 2 latches on ISOFIX child seats are

secured to them.

– One ring B, located behind the seat, called the

TOP TETHER, for attaching seats ﬁtted with an

upper strap.

"ISOFIX" mountings

The seats shown below are ﬁtted with ISOFIX

compliant mountings:

► Pass the strap of the child seat behind the

seat backrest, centring it between the openings

for the head restraint rods.

► Secure the upper strap hook to ring B.

► Tighten the upper strap.

When ﬁtting an ISOFIX child seat to the

left-hand rear seat of the bench seat,

before ﬁtting the seat, ﬁrst move the centre

rear seat belt towards the middle of the

vehicle, so as to avoid the seat interfering

with the operation of the seat belt.

Front seat

* Depending on version.

The mountings comprise three rings for each

seat, indicated by a marking:

Safety

An incorrectly installed child seat in a

vehicle compromises the child's safety in

the event of an accident.

"RÖMER Baby-Safe and its ISOFIX base"

"RÖMER Duo Plus ISOFIX"

(size category: B1)

(size category: E)

Strictly observe the ﬁtting instructions

provided in the user guide supplied with the

child seat.

Group 0+: from birth to 13 kg

Group 1: from 9 to 18 kg

For information about the options for

ﬁtting ISOFIX child seats in your vehicle,

refer to the summary table.

Installed "rearward facing" using an ISOFIX

base which is attached to rings A.

Suitable for forward-facing installation only.

Attached to rings A and ring B, referred to as

TOP TETHER, using an upper strap.

Three seat body angles: sitting, reclining,

lying down.

This child seat can also be used in seat

positions not equipped with ISOFIX

mountings. In this case, it must be secured to

the vehicle's seat by the three-point seat belt.

Adjust the front seat of the vehicle so that the

child's feet do not touch the backrest.

The base has a support leg, height-

adjustable, which rests on the vehicle's ﬂoor.

This child seat can also be secured with a

seat belt. In this case, only the shell is used

and attached to the vehicle seat using the

three-point seat belt.

Recommended ISOFIX child

seats

Also consult the user guide from the child

seat’s manufacturer to ﬁnd out how to

install and remove the seat.

i-Size child seats

i-Size child seats have two latches that are anchored to the two rings A.

These i-Size child seats also have:

– either an upper strap that is attached to ring B.

– or a support leg that rests on the vehicle ﬂoor, compatible with the approved i-Size seat position.

Their role is to prevent the child seat from tipping forward in the event of a collision.

For more information on the ISOFIX mountings, refer to the corresponding section.

Safety -> ISOFIX child seats for Your Peugeot 2008 SUV Second Generation (2019-2025)

Related Topics

Safety