Get AUDIO EQUIPMENT Guide for Peugeot 206 4 Door 1998-2013

28 - AUDIO EQUIPMENT

AUDIO RD3

Stalk movement

1 - Press (behind)

2 - Press (behind)

Function

Increase volume.

Decrease volume.

1 + 2 - Simultaneous press

3 - Press

Sound cut-off (mute); restoring of the sound by pressing any button.

Automatic search of higher frequencies (radio) - Selection of the next track (CD).

4 - Press

Automatic search of lower frequencies (radio) - Selection of the previous track (CD).

Change of source (radio/CD/CD changer).

5 - Press the end

6 - Rotation (clockwise)

Selection of next station stored in the memory (radio) - Selection of following CD.

7 - Rotation (anti-clockwise) Selection of previous station stored in the memory (radio) - Selection of previous CD.

AUDIO EQUIPMENT 29

-

Button

Function

A

B

C

Radio on/off.

-

Decrease volume.

Increase volume.

RDS function on/off.

+

D

E

H

RDS

TA

Press for more than 2 seconds: regional following mode on/off.

Trafic information priority on/off.

Press for more than 2 seconds: PTY function on/off.

Selection of bass, treble, loudness, sound distribution and automatic volume correction.

¯

I

Increase setting of functions associated with button H.

Decrease setting of functions associated with button H.

5

6

J

Manual and automatic search of higher frequency.

Selection of next CD track and PTY (radio).

L

M

N

8

MAN

7

Manual/automatic operation of buttons L and N.

Manual and automatic search of lower frequency.

Selection of previous CD track and PTY (radio).

Selection of the CD changer.

Press for more than 2 seconds: shufle.

P

CH.CD

CD

Selection of the CD.

Press for more than 2 seconds: shufle.

Q

Selection of the radio. Selection of FM1, FM2, FMast, AM wavebands.

Press for more than 2 seconds: automatic storing of stations in the memory (autostore).

R

S

Radio

Ejection of the CD.

5

Selection of station stored in the memory.

Press for more than 2 seconds: storing of a station in the memory.

1 to 6 1 2 3 4 5 6

1 to 5 1 2 3 4 5

Selection of a CD changer disc.

30 - AUDIO EQUIPMENT

Adjusting the bass

When "BASS" is dis-

GENERAL FUNCTIONS

On/off

AUDIO SETTINGS

Press button H sev-

eral times in succes-

sion to access the bass

(BASS), treble (TREB),

loudness (LOUD), fader

(FAD), balance (BAL)

and automatic volume

correction settings.

played, press button

I or J to vary the set-

ting.

- "BASS -9" for a

minimum bass

setting,

With the ignition key

in the accessories or

ignition position, press

button A to switch the

set on or off.

The set can oper-

ate for 30 minutes

Exit from audio mode is automatic

after a few seconds without pressing

any button, or by pressing button H

after coniguration of the automatic

volume correction.

-

"BASS 0" for a normal setting,

"BASS +9" for a maximum bass

setting.

without the vehicle ignition being

switched on.

Note: bass, treble and loudness set-

tings are speciic to each source. It

is possible to set them differently for

radio, CD and CD changer.

Anti-theft system

Adjusting the treble

When "TREB" is displayed, press

button I or J to vary the setting.

The audio system is coded in such a

way that it can operate only on your

vehicle. It would not function if itted

to another vehicle.

The anti-theft system is automatic

and requires no action on your

part.

-

"TREB -9" for a minimum treble

setting,

-

"TREB 0" for a normal setting,

"TREB +9" for a maximum

treble setting.

Adjusting the loudness

ADJUSTING THE VOLUME

Press button C to increase the

volume, or button B to decrease it.

Continuous pressure on buttons C

and B allows a gradual adjustment of

the volume.

This function automatically empha-

sises bass and treble tones. Press

button I or J to switch the function on

or off.

AUDIO EQUIPMENT 31

-

Adjusting the front/rear sound

distribution (Fader)

Selecting radio mode

Press button R.

RADIO

Notes on radio reception

When "FAD" is displayed, press

button I or J.

Button I increases the volume in the

Your car radio is subject to phenom-

ena which do not affect domestic ra-

dio sets. Both AM (MW/LW) and FM

reception are subject to various forms

of interference. This is no relection on

the quality of the equipment, but is due

to the nature of the signals and the

way in which they are transmitted.

On MW/LW, interference may be no-

ticed when passing under high voltage

power lines or bridges, or in tunnels.

On FM, interference may be the re-

sult of increasing distance from the

transmitter, delection of the signals by

obstacles (mountains, hills, buildings,

etc.), or of being in an area which is

not covered by a transmitter.

front.

Button J increases the volume in the

rear.

Selecting a waveband

Adjusting the right/left sound

distribution (Balance)

When "BAL" is displayed, press

button I or J.

Button I increases the volume on the

right-hand side.

Button J increases the volume on the

left-hand side.

Briely press button

R to select the FM1,

FM2 FMast and AM

wavebands.

Automatic volume correction

This function enables the volume to

be automatically adjusted depending

on the level of noise produced by the

speed of the vehicle.

Press buttons I or J to switch the

function on or off.

AUDIO EQUIPMENT 31

-

Adjusting the front/rear sound

distribution (Fader)

Selecting radio mode

Press button R.

RADIO

Notes on radio reception

When "FAD" is displayed, press

button I or J.

Button I increases the volume in the

Your car radio is subject to phenom-

ena which do not affect domestic ra-

dio sets. Both AM (MW/LW) and FM

reception are subject to various forms

of interference. This is no relection on

the quality of the equipment, but is due

to the nature of the signals and the

way in which they are transmitted.

On MW/LW, interference may be no-

ticed when passing under high voltage

power lines or bridges, or in tunnels.

On FM, interference may be the re-

sult of increasing distance from the

transmitter, delection of the signals by

obstacles (mountains, hills, buildings,

etc.), or of being in an area which is

not covered by a transmitter.

front.

Button J increases the volume in the

rear.

Selecting a waveband

Adjusting the right/left sound

distribution (Balance)

When "BAL" is displayed, press

button I or J.

Button I increases the volume on the

right-hand side.

Button J increases the volume on the

left-hand side.

Briely press button

R to select the FM1,

FM2 FMast and AM

wavebands.

Automatic volume correction

This function enables the volume to

be automatically adjusted depending

on the level of noise produced by the

speed of the vehicle.

Press buttons I or J to switch the

function on or off.

32 - AUDIO EQUIPMENT

Automatic station search

Manual station search

Press the "MAN" button.

Automatic storing of FM stations

in the memory (autostore)

Briely press button L or N to in-

crease or decrease the frequency

displayed.

Press and hold button

R for more than two

seconds.

By continuing to press the button in

the direction selected, you will obtain

continuous scrolling of the frequency.

The scrolling stops as soon as the

button is released.

Pressing the "MAN" button again

returns you to automatic station

search.

Briely press button L or N to search

for the station immediately above or

below. By continuing to press the

button in the direction selected, you

will obtain continuous scrolling of the

frequency.

The scrolling stops at the irst sta-

tion found as soon as the button is

released.

Your radio automatically stores the

6 stations with the strongest signal in

FM. These stations are stored in the

FMast waveband.

If it is not possible to ind 6 stations,

the remaining memories are empty.

If the TA trafic programme is select-

ed, only stations broadcasting this

type of programme are selected.

Searching for a station occurs irst in

"LO" sensitivity (selection of the most

powerful transmitters) during scan-

ning of the waveband, then in "DX"

sensitivity (selection of the weakest

and most distant transmitters).

Manual storing of stations in the

memory

Select the station required.

Press one of the buttons "1" to "6"

for more than two seconds.

Recalling stations stored in the

memory

For each waveband, briely press

buttons "1" to "6" to recall the cor-

responding station.

To make a direct search in "DX" sen-

sitivity, press button L or N twice.

The sound stops then becomes audi-

ble again, conirming that the station

has been stored in the memory.

AUDIO EQUIPMENT 33

-

Trafic information programme

(TA)

Regional following mode

RDS

When they are part of a network,

certain stations broadcast regional

programmes in the various areas

they serve. With regional following

mode you can keep listening to the

same programme.

Press the "RDS" button for more

than two seconds to switch the func-

tion on or off.

Using the RDS (Radio Data

System) function on FM

Radio Data System allows you to

continue listening to the same sta-

tion, whatever frequency it is using

for the region you are going through.

Press the "TA" button

to switch the function

on or off.

The multifunction dis-

play will show:

-

"TA" if the function is selected,

"(TA)" if the function is selected

but not available.

Brielypressthe"RDS"

button to switch the

function on or off.

The multifunction dis-

play will show:

Any trafic information lash will be

given priority, whatever source you

are listening to (radio, CD or CD

changer).

If you wish to interrupt a message,

press the "TA" button; this switches

the function off.

Note: the volume of trafic informa-

tion is independent of the volume

of normal radio listening. You can

adjust it using the volume button.

The setting will be stored and will

be used when the next messages

are broadcast.

-

"RDS" if the function is selected.

"(RDS)" if the function is

selected but not available.

RDS station following

The display indicates the name of the

station selected. The radio is contin-

ually searching for the station which

has the best reception and which is

transmitting the same programme.

34 - AUDIO EQUIPMENT

Search by type of programme

(PTY)

Thisallowsyoutolistentostationsbroad-

casting a speciic type of programme

(news, culture, sport, rock, etc.).

To search for a PTY programme:

EON system

This connects stations which are part

of the same network. It enables the

broadcast of trafic information or a

PTY programme, by a station that is

part of the same network as the sta-

tion to which you are listening.

This service is available when you

have selected the TA trafic informa-

tion programme or the PTY function.

With FM selected, press

the "TA" button for

two seconds to switch

this function on or off.

-

select the PTY function,

-

briely press button L or N to

scroll down the list of the various

types of programmes offered.

-

when the programme of your

choice is displayed, keep button

L or N pressed for two seconds

to carry out an automatic search

(after an automatic search the

PTY function is switched off).

In PTY mode the different types of

programmecanbestoredinthemem-

ory. To do this, press the preselection

buttons "1" to "6" for two seconds.

Briely press the corresponding but-

ton to recall the type of programme

stored in the memory.

AUDIO EQUIPMENT 35

-

Selecting a track

Shufle (RDM)

COMPACT DISC

Selecting CD mode

When the CD player is selected,

press and hold button Q for two sec-

onds. The tracks will be played in

random sequence. Pressing the but-

ton again for two seconds returns

you to normal play.

After insertion of a

disc, printed face

upwards, the player

starts automatically.

Press button L to select the next

track.

Press button N to return to the start

of the current track or to select the

previous track.

Shufle mode is de-activated each

time the set is switched off.

If a disc is already inserted, press

button Q.

Ejection of a disc

Accelerated play

Press and hold button L or N for

forwards or backwards accelerated

play.

Accelerated play stops as soon as

the button is released.

Press button

eject the disc from the

player.

S

to

The use of copied compact

discs may cause faults.

Insert circular compact

discs only.

36 - AUDIO EQUIPMENT

RADIO RECEPTION

(AERIAL ADJUSTMENT)

Notes on radio reception. Your radio

will be subject to phenomena which

do not affect domestic radio sets.

Both MW/LW and FM reception are

subject to various forms of interfer-

ence, which are no relection on the

quality of your equipment but are due

to the nature of the signals and the

way in which they are transmitted.

On FM, interference may be the re-

sult of increasing distance from the

transmitter, delection of the signal

by obstacles (mountains, hills, build-

ings, etc.), or of being in an area not

covered by a transmitter.

On MW/LW, interference may be no-

ticed when passing underneath high

voltage power lines, under bridges or

in tunnels.

Saloon: recommended position for

the front aerial for best reception.

No particular position for the ixed

rear aerial (preset aerial).

AUDIO EQUIPMENT 37

-

The speakers are situated:

-

in the front door pillars:

two Tweeters (2) for

206 AUDIO SYSTEM

reproduction of the treble

(high frequency) in the front.

in the front doors:

two Woofers (3) for reproduction

of the bass (low frequencies) in

the front.

in the rear doors:

two Tweeters (4) set into

two Woofers (5), providing a

balance of frequencies in the

rear.

-

in the boot: a Subwoofer (6)

for reproduction of the bass and

ultra-bass (very low frequencies)

throughout the whole of the

passenger compartment.

You will appreciate the clarity and

depth and notice that the sound

ills the whole of the vehicle

perfectly.

Adjusting in CD or Radio mode

The basic functions remain those of

the audio set.

Presentation

Your 206 is itted with a JBL audio

system, designed speciically for the

passenger compartment.

At the heart of the system, a

240 wattmultifunctionampliier (1)

(integrated in the subwoofer in

the boot) independently controls

8 high acoustic deinition speakers

and the subwoofer.

This system provides optimal re-

production and distribution of the

sound in the vehicle, both in the

front and the rear.

There is no need for any further ad-

justment. However, in order to take

full advantage of your JBL audio

system, you are advised to set the

AUDIO functions (BASS, TREB,

FAD, BAL) to position "0" (zero), the

Loudness (LOUD) to the "ON" posi-

tion for CD mode and to the "OFF"

position for radio mode.

AUDIO EQUIPMENT for Your Peugeot 206 4 Door 1998-2013

Related Topics

Popular Owner Manuals

Latest Owner Manuals