24 - INSTRUMENTS and CONTROLS
Resetting the service indicator
Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Oil level gauge fault
Flashing of the six segments indi-
cates a malfunction of the oil level
gauge.
There is a risk of damage to the en-
gine.
Consult a PEUGEOT dealer.
Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:
Surplus of oil
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
If the surplus of oil is conirmed by
a check using the dipstick, contact a
PEUGEOT dealer without delay.
-
-
-
Switch off the ignition.
Press and hold button 1.
Switch on the ignition.
The display begins a 10 second
countdown
Keep button 1 pressed for
10 seconds.
-
The display shows [= 0] and the
spanner disappears.
Lack of oil
Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
If the lack of oil is conirmed by a
check using the dipstick, it is essen-
tial that the level is topped up.
The level read on the gauge will
only be correct if the vehicle is
on level ground and the engine
has been off for more than 15 mi-
nutes.
English 