Advertisement

Advertisement

PRACTICAL INFORMATION -> CHANGING A BULB for Your Peugeot 206 4 Door 1998-2013

96 - PRACTICAL INFORMATION

CHANGING A BULB

To make access easier, on the right-

hand side, irst remove the screen

wash reservoir iller pipe:

Dipped headlamps H7 55W/

main beam headlamps H1 55 W

F On itting, ensure that the

direction notches are in the

correct position and that the

securing clip(s) is(are) secured

correctly.

F Remove the protective cover A

for the H7 55 W bulb or B for the

H1 55 W bulb.

F align the notches by turning,

F pull upwards.

F Disconnect the connector(s) C.

F Press the end of the securing

clip(s) D to remove it(them).

Change the faulty bulb.

F Reconnect the connector.

1. Dipped beam headlamps/

main beam headlamps

2. Side lights

F Replace the protective cover(s),

then the screen wash reservoir

iller pipe (right-hand side).

3. Direction indicators

PRACTICAL INFORMATION 97

-

Handle the bulbs with a

dry cloth.

The headlamps are itted

with polycarbon glass with

a protective coating. Do

not clean them using a dry or

abrasive cloth, or using deter-

gents or solvents.

Use a sponge and soapy water.

High pressure washing

When using this type of washing

on stubborn dirt, do not persist on

the headlamps, lights and their

surrounds to avoid damaging their

coating and seal.

Side lights W 5 W

Amber direction indicator

side repeater WY 5 W

F Turn the pin connector 2 a

quarter turn and remove it.

F Change the bulb.

F Push the repeater forwards and

release it.

F Remove the repeater and

change it.

It can be obtained from a PEUGEOT

dealer.

Amber direction indicators

PY 21 W

F Turn the pin connector 3 a

quarter turn (towards the front of

the vehicle) and remove it.

F Change the bulb.

98 - PRACTICAL INFORMATION

Unclip the boot side trim.

Unclip the foam cover and reach

behind the cover to locate the wing

nut.

Rear lights

Third brake light 5 bulbs

W 5 W

1. Direction indicators P21 W.

2. Reversing lights P21 W.

3. Brake lights/side lights

P21/5 W.

Using a 10 mm spanner, unscrew the

2 nuts A.

Remove the wing nut.

Release the light unit.

Release the light unit.

Squeeze the two tabs B to release

the bulb holder.

Press the lug A and disconnect the

connector.

Remove the foam.

Change the faulty bulb.

Move aside the tabs B and remove

the bulb holder.

Change the faulty bulb.

When reitting, ensure that the bulb

holder, the light and the foam cover

are repositioned correctly.

PRACTICAL INFORMATION 99

-

Front fog lamps H1 55 W

Rear fog lamp P21 W

Number plate lights W 5 W

Press under the access lap to re-

lease it.

Open the lap.

Unclip the lamp and release the as-

sembly.

Turn the pin connector a quarter turn

and remove it.

Change the bulb.

Insert a thin screwdriver into one of the

outer holes of the transparent cover.

Push it outwards to unclip it.

Remove the transparent cover.

Change the faulty bulb.

Turn the cover to remove it.

Disconnect the bulb.

Press the two ends of the securing

clip to release the bulb.

Related Topics

CHANGING A WHEEL

SPECIAL FEATURES OF ALLOY WHEELS

CHANGING A FUSE

BATTERY

ECONOMY MODE FUNCTION

FITTING AUDIO EQUIPMENT

TOWING YOUR VEHICLE

TOWING A TRAILER, CARAVAN, BOAT, ETC.

BODYWORK MAINTENANCE

206 ACCESSORIES

Popular Owner Manuals

Latest Owner Manuals

Fourth Generation (2022-2025) Citroen C3 SUV

Third Generation (2016-2024) Citroen C3 SUV

Second Generation (2009-2016) Citroen C3 SUV

First Generation (2002-2009) Citroen C3 SUV

Second Generation (2013-2017) Citroen C3 Picasso SUV

First Generation (2008-2012) Citroen C3 Picasso SUV