ACCESS
Changing the battery
Starting the vehicle
Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
) press the closed padlock, the cour-
tesy lights come on and the direction
indicators flash for a few seconds.
) Insert the key in the ignition switch.
The system recognises the starting
code.
) Turn the key fully towards the dash-
board to position 3 (Starting).
) When the engine starts, release the
key.
Remote control problem
Following disconnection of the vehicle
battery, replacement of the remote con-
trol battery or in the event of a remote
control malfunction, you can no longer
unlock, lock or locate your vehicle.
) First of all, use the key in the lock to
unlock or lock your vehicle.
) Then, reinitialise the remote control.
If the problem persists, contact a
PEUGEOT dealer as soon as possible.
Battery ref.: CR1620/3 volts.
If the battery is flat, you are in-
formed by illumination of this
warning lamp, an audible signal
and a message in the multifunc-
tion screen.
Switching the vehicle off
) Unclip the casing using a coin at the
notch.
) Slide the flat battery out of its location.
) Slide the new battery into its loca-
tion observing the original direction.
) Clip the casing.
) Reinitialise the remote control.
) Immobilise the vehicle.
Reinitialisation
) Switch off the ignition.
) Turn the key to position 2 (Ignition
on).
) Press the closed padlock immedi-
ately for a few seconds.
) Switch off the ignition and remove
the key from the ignition switch.
The remote control is fully operational
again.
) Turn the key fully towards you to po-
sition 1 (Stop).
) Remove the key from the ignition
switch.
i Key in ignition
If the key has been left in the igni-
tion, an audible signal is heard on
opening the driver's door.
70
English