TECHNICAL DATA -> Diesel engines for Your Peugeot 207 4 Door First Generation (2006-2014)

CHILD SAFETY  
5
ISOFIX CHILD SEAT RECOMMENDED BY PEUGEOT AND APPROVED FOR YOUR VEHICLE  
RÖMER Duo Plus ISOFIX (size category B1)  
Group 1: from 9 to 18 kg  
Installed in the forwards-facing position.  
Fitted with an upper strap to be secured on the upper ring B, referred to as  
the TOP TETHER.  
Three seat body angles: sitting, reclining, lying.  
This child seat can also be used on seats which are not tted with ISOFIX mountings. In this case, it must be attached  
i to the vehicle seat using the three point seat belt.  
Follow the instructions for tting the child seat given in the seat manufacturer's installation guide.  
5
CHILD SAFETY  
LOCATIONS FOR THE INSTALLATION OF ISOFIX CHILD SEATS (SALOON)  
In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the  
vehicle seats tted with ISOFIX mountings.  
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a  
letter from A to G, is indicated on the child seat next to the ISOFIX logo.  
Weight of the child/indicative age  
Less than 10 kg  
Less than 10 kg  
(group 0)  
(group 0)  
Up to 6 months  
approx  
From 9 to 18 kg (group 1)  
From 1 to 3 years approx  
Less than 13 kg  
(group 0+)  
Up to 1 year approx  
Type of ISOFIX child seat  
ISOFIX size category  
Infant car seat*  
"rear facing"  
"rear facing"  
"forward facing"  
F
G
C
X
D
E
C
X
D
A
B
B1  
Universal and semi-universal  
ISOFIX child seats which can  
be installed on the rear seats  
IUF**  
IL-SU**  
IL-SU**  
IL-SU**  
IL-SU**  
IUF: seat suitable for the installation of an Isox Universal seat, "Forward facing" and secured using the "Top Tether" upper strap.  
IL-SU: seat suitable for the installation an Isox Semi-Universal seat which is:  
-
-
-
"rear facing" tted with a "Top Tether" upper strap or a stay,  
"forward facing" tted with a stay,  
an infant car seat tted with a "Top Tether" upper strap or a stay.  
For the securing of the "Top Tether" upper strap, refer to the "ISOFIX Mountings" section.  
X: seat which is not suitable for the installation of an ISOFIX seat of the size category indicated.  
*
The ISOFIX infant car seat, xed to the lower rings of a seat equipped with ISOFIX mountings, occupies the three rear seats.  
To install it on the rear seats of a 3-door model, the front seat belt must be adjusted to the lowest position.  
Infant car seats and "car cots" cannot be installed on the front passenger seat.  
** The head restraint of the seat equipped with ISOFIX mountings must be removed and stored.  
98  
CHILD SAFETY  
5
LOCATIONS FOR THE INSTALLATION OF ISOFIX CHILD SEATS (SW)  
In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the  
vehicle seats tted with ISOFIX mountings.  
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a  
letter from A to G, is indicated on the child seat next to the ISOFIX logo.  
Weight of the child/indicative age  
Less than 10 kg  
Less than 10 kg  
(group 0)  
(group 0)  
Up to 6 months  
approx  
From 9 to 18 kg (group 1)  
From 1 to 3 years approx  
Less than 13 kg  
(group 0+)  
Up to 1 year approx  
Type of ISOFIX child seat  
ISOFIX size category  
Infant car seat*  
"rear facing"  
"rear facing"  
C**  
"forward facing"  
F
G
C**  
D
E
D
A
B
B1  
Universal and semi-universal  
ISOFIX child seats which can  
be installed on the rear seats  
IUF(a)  
IL-SU(a)  
IL-SU(a)  
IL-SU(a)  
IL-SU(a)  
IUF: seat suitable for the installation of an Isox Universal seat, "Forward facing" and secured using the "Top Tether" upper strap.  
IL-SU: seat suitable for the installation an Isox Semi-Universal seat which is:  
-
-
-
"rear facing" tted with a "Top Tether" upper strap or a stay,  
"forward facing" tted with a stay,  
an infant car seat tted with a "Top Tether" upper strap or a stay.  
For the securing of the "Top Tether" upper strap, refer to the "ISOFIX Mountings" section.  
(a) The head restraint where the ISOFIX seat is tted must be removed and stored safely.  
*
The ISOFIX infant car seat, xed to the lower rings of a seat equipped with ISOFIX mountings, occupies the three rear  
seats and prevents use of the 2/3 - 1/3 modularity.  
Infant car seats and "car cots" cannot be installed on the front passenger seat.  
** The front seat must be adjusted ve notches back from the fully forward position.  
99