TECHNICAL DATA -> Emergency or assistance for Your Peugeot 207 4 Door First Generation (2006-2014)

6
SAFETY  
Impact detection zones  
AIRBAGS  
Front airbags  
System which protects the head and  
chest of the driver and front passenger  
in the event of a front impact.  
The driver's airbag is tted in the centre  
of the steering wheel; the front passen-  
ger's airbag is tted in the dashboard  
above the glove box.  
System designed to maximise the safety  
of the occupants (with the exception of  
the rear centre passenger) in the event  
of violent collisions. It supplements the  
action of the force-limiting seat belts.  
If a collision occurs, the electronic de-  
tectors record and analyse the front and  
side impacts sustained in the impact  
detection zones:  
-
in the case of a serious impact, the  
airbags are deployed instantly and  
protect the occupants of the vehicle  
(with the exception of the rear centre  
passenger); immediately after the  
impact, the airbags deate rapidly  
so that they do not hinder visibility  
or the exit of the occupants,  
A. Front impact zone.  
B. Side impact zone.  
-
in the case of a minor or rear impact  
or in certain roll-over conditions, the  
airbags will not be deployed; the  
seat belt alone is sufcient to pro-  
vide optimum protection in these  
situations.  
Deployment of the airbag(s) is ac-  
i
Operation  
companied by a slight emission of  
harmless smoke and a noise, due to  
the activation of the pyrotechnic car-  
tridge incorporated in the system.  
This smoke is not harmful, but sen-  
sitive individuals may experience  
slight irritation.  
The noise of the detonation may  
result in a slight loss of hearing for  
a short time.  
The airbags are deployed simultane-  
ously, unless the passenger's front  
airbag is deactivated, in the event of a  
serious front impact applied to all or part  
of the front impact zone A, in the lon-  
gitudinal centreline of the vehicle on a  
horizontal plane and directed from the  
front to the rear of the vehicle.  
The front airbag inates between the  
front occupant of the vehicle and the  
dashboard to cushion their forward  
movement.  
The airbags do not operate when  
!
the ignition is switched off.  
This equipment will only operate  
once. If a second impact occurs (dur-  
ing the same or a subsequent acci-  
dent), the airbag will not operate.  
108  
SAFETY  
6
Deactivation  
Only the front passenger's airbag can  
be deactivated:  
) with the ignition off, insert the key  
in the passenger airbag deactivation  
switch 1,  
) turn it to the "OFF" position,  
) then, remove the key keeping the  
switch in the new position.  
Operating fault  
To assure the safety of your child,  
If this warning lamp comes on in  
the instrument panel, accompa-  
nied by an audible warning and  
!
it is imperative that the passen-  
ger's airbag is deactivated when  
you install a "rear facing" child seat  
on the front passenger seat.  
a message in the multifunction  
screen, contact a PEUGEOT dealer or a  
qualied workshop to have the system  
checked. The airbags may no longer be  
deployed in the event of a serious impact.  
Otherwise, the child would risk be-  
ing seriously injured or killed if the  
airbag were deployed.  
Reactivation  
If both airbag warning lamps come  
!
on continuously, do not install a  
When you remove the child seat, turn  
switch 1 to the "ON" position to reacti-  
vate the airbag and so assure the safety  
of your front passenger in the event of  
an impact.  
"rear facing" child seat on the front  
passenger seat.  
Have it checked by a PEUGEOT  
dealer or a qualied workshop.  
According to version, this warn-  
ing lamp comes on either in the  
instrument panel or in the central  
panel when the ignition is on and  
until the airbag is reactivated.  
109  
6
SAFETY  
Impact detection zones  
Operation  
Lateral airbags*  
It is deployed at the same time as the  
corresponding lateral airbag in the event  
of a serious side impact applied to all or  
part of the side impact zone B, perpen-  
dicular to the longitudinal centreline of  
the vehicle on a horizontal plane and  
directed from the outside towards the  
inside of the vehicle.  
System which protects the driver and  
front passenger in the event of a seri-  
ous side impact in order to limit the risk  
of injury to the chest.  
Each lateral airbag is tted in the front  
seat back frame, on the door side.  
The curtain airbag inates between the  
front or rear occupant of the vehicle and  
the windows.  
A. Front impact zone.  
B. Side impact zone.  
In the event of a minor impact or  
!
bump on the side of the vehicle or  
if the vehicle rolls over, the airbag  
may not be deployed.  
The airbag is not deployed in the  
event of a rear or front collision.  
Operation  
It is deployed unilaterally in the event  
of a serious side impact applied to all  
or part of the side impact zone B, per-  
pendicular to the longitudinal centreline  
of the vehicle on a horizontal plane and  
directed from the outside towards the  
inside of the vehicle.  
The lateral airbag inates between the  
front occupant of the vehicle and the  
corresponding door trim panel.  
Operating fault  
Curtain airbags*  
If this warning lamp comes on  
in the instrument panel, accom-  
panied by an audible signal and  
System which protects the driver and  
passengers (with the exception of the  
rear centre passenger) in the event of a  
serious side impact in order to limit the  
risk of head injuries.  
Each curtain airbag is tted in the pil-  
lars and the upper part of the passenger  
compartment.  
a message on the multifunction  
screen, contact a PEUGEOT dealer or  
a qualied workshop to have the system  
checked. The airbags may no longer be  
deployed in the event of a serious impact.  
* According to country.  
* According to country.  
110  
SAFETY  
6
For the airbags to be fully  
!
effective, observe the following  
safety rules:  
Sit in a normal upright position.  
Front airbags  
Wear a correctly adjusted seat belt.  
Do not drive holding the steering wheel by its spokes or resting your hands on the  
centre part of the wheel.  
Passengers must not place their feet on the dashboard.  
Smoke as little as possible as deployment of the airbags can cause burns or the  
risk of injury from a cigarette or pipe.  
Never remove or pierce the steering wheel or hit it violently.  
Do not leave anything between the  
occupants and the airbags (a child,  
pet, object...). This could hamper  
the operation of the airbags or in-  
jure the occupants.  
After an accident or if the vehicle  
has been stolen or broken into,  
have the airbag systems checked.  
Lateral airbags*  
All work on the airbag system must  
be carried out by a PEUGEOT deal-  
er or a qualied workshop.  
Only put approved covers on the seats, compatible with deployment of the lateral air-  
bags. To see the range of compatible seat covers for your vehicle, visit a PEUGEOT  
dealer (see "Practical information § Accessories").  
Do not x or attach anything to the seat backs. This could cause injury to the chest  
or arms when the lateral airbag inates.  
Do not sit with the upper part of the body any nearer to the door than necessary.  
Even if all of the precautions men-  
tioned above are observed, a risk of  
injury or of slight burns to the head,  
chest or arms when an airbag is de-  
ployed cannot be ruled out. In fact,  
the bag inates almost instantly  
(within a few milliseconds) then  
deates within the same time dis-  
charging hot gas via the openings  
provided for this purpose.  
Curtain airbags*  
Do not x or attach anything to the roof. This could cause injury to the head when  
the curtain airbag inates.  
Do not remove the grab handles installed on the roof, they play a part in securing  
the curtain airbags.  
* According to country.  
111  
7
DRIVING  
Releasing  
PARKING BRAKE  
6-SPEED MANUAL GEARBOX  
Engaging 5th or 6th gear  
) Pull the parking brake lever gently,  
press the release button then lower  
the lever fully.  
) Move the lever fully to the right to  
engage 5th or 6th gear.  
When the vehicle is being driven,  
if this warning lamp and the STOP  
warning lamp come on, accom-  
panied by an audible signal and a  
message on the multifunction screen, this  
indicates that the parking brake is still on or  
has not been properly released.  
Engaging reverse gear  
When parking on a slope, direct  
!
your wheels against the pavement,  
apply the parking brake and en-  
gage a gear.  
Applying  
) Pull the parking brake lever fully up  
to immobilise your vehicle.  
) Raise the ring under the knob and  
move the gear lever to the left then  
forwards.  
Only engage reverse gear when  
!
the vehicle is stationary with the  
engine at idle.  
As a safety precaution and to facili-  
tate starting of the engine:  
i
-
-
always select neutral,  
press the clutch pedal.  
112  
DRIVING  
7
Example:  
- You are in third gear.  
GEAR SHIFT INDICATOR*  
In the case of driving which makes  
particular demands on the perfor-  
mance of the engine (rm pres-  
sure on the accelerator pedal, for  
example, when overtaking...), the  
system will not recommend a gear  
change.  
System which reduces fuel consump-  
tion by advising the driver to change up  
a gear on vehicles tted with a manual  
gearbox.  
i
The system never suggests:  
-
-
-
engaging rst gear,  
engaging reverse gear,  
engaging a lower gear.  
-
You press the accelerator pedal  
moderately.  
Operation  
The system acts solely in the context of  
economical driving.  
Depending on the driving situation and  
your vehicle's equipment, the system  
may advise you to skip one or more  
gears. You can follow this instruc-  
tion without engaging the intermediate  
gears.  
The gear engagement recommenda-  
tions must not be considered compulso-  
ry. In fact, the conguration of the road,  
the amount of trafc and safety remain  
determining factors when choosing the  
best gear. Therefore, the driver remains  
responsible for deciding whether or not  
to follow the advice given by the system.  
-
The system may suggest that you  
engage a higher gear, if appropriate.  
This function cannot be deactivated.  
The information appears in the form of an  
arrow on the instrument panel display.  
* According to engine.  
113  
7
DRIVING  
AUTOMATIC GEARBOX  
Gear lever  
Displays in the instrument panel  
Four-speed automatic gearbox which  
offers a choice between the comfort of  
fully automatic operation, enhanced by  
sport and snow programmes, or manual  
gear changing.  
Therefore, four driving modes are of-  
fered:  
-
automatic operation for electronic  
management of the gears by the  
gearbox,  
-
-
-
sport programme for a more dy-  
namic style of driving,  
snow programme to improve driv-  
ing when traction is poor,  
manual operation for sequential  
changing of the gears by the driver.  
P. Park.  
-
When you move the lever in the gate  
to select a position, the corresponding  
indicator is displayed in the instrument  
panel.  
P. Park  
R. Reverse  
N. Neutral  
D. Drive (Automatic driving)  
S. Sport programme  
7. Snow programme  
Immobilisation of the vehicle, park-  
ing brake on or off.  
Starting the engine.  
-
R. Reverse.  
Reversing manoeuvres, vehicle sta-  
tionary, engine at idle.  
N. Neutral.  
-
Gear selection gate  
-
Immobilisation of the vehicle, park-  
ing brake on.  
-
Starting the engine.  
D. Automatic operation.  
1 2 3 4. Gears engaged during manual  
operation  
-. Invalid value during manual operation  
M +/-. Manual operation with sequential  
changing of the four gears.  
) Push forwards to change up through  
the gears.  
Foot on brake  
or  
) Pull backwards to change down  
through the gears.  
)Press the brake pedal when  
this indicator lamp is dis-  
played in the instrument  
panel (e.g.: starting the en-  
gine).  
1. Gear lever.  
2. Button "S" (sport).  
3. Button "7" (snow).  
114  
DRIVING  
7
Moving off  
Automatic operation  
Sport and snow programmes  
) Select position D for automatic These two special programmes supple-  
changing of the four gears.  
) Apply the parking brake.  
) Select position P or N.  
) Start the engine.  
ment the automatic operation in very  
specic conditions of use.  
If this procedure is not followed, an au-  
dible signal is heard, accompanied by a  
message in the multifunction screen.  
) With the engine running, press the  
brake pedal.  
) Release the parking brake.  
) Select position R, D or M.  
) Gradually release the brake pedal.  
The vehicle moves off immediately.  
The gearbox then operates in auto-  
adaptive mode, without any intervention  
on the part of the driver. It continuously  
selects the most suitable gear accord-  
ing to the style of driving, the prole of  
the road and the load in the vehicle.  
For maximum acceleration without  
touching the lever, press the accelera-  
tor pedal down fully (kick down). The  
gearbox changes down automatically  
or maintains the gear selected until the  
maximum engine speed is reached.  
Sport programme "S"  
) Press button "S", after starting the  
engine.  
The gearbox automatically favours a  
dynamic style of driving.  
S appears on the instrument  
panel.  
On braking, the gearbox changes down  
automatically to provide efcient engine  
braking.  
If you release the accelerator sharply,  
the gearbox will not change to a higher  
gear for safety reasons.  
Snow programme "7"  
) Press button "7", after starting the  
engine.  
The gearbox adapts to driving on slip-  
pery roads.  
If position N is engaged inadver-  
tently while driving, allow the en-  
gine to return to idle then engage  
position D to accelerate.  
i
This programme improves starting and  
drive when traction is poor.  
When the engine is running at  
!
7 appears on the instrument  
panel.  
idle, with the brakes released, if  
position R, D or M is selected, the  
vehicle moves even without the  
accelerator being pressed.  
When the engine is running, never  
leave children in the vehicle with-  
out supervision.  
When carrying out maintenance with  
the engine running, apply the park-  
ing brake and select position P.  
Return to automatic operation  
Never select position N while the  
!
vehicle is moving.  
) At any time, press the button select-  
ed again to quit the programme en-  
gaged and return to auto-adaptive  
mode.  
Never select positions P or R un-  
less the vehicle is completely sta-  
tionary.  
115  
7
DRIVING  
Invalid value during manual  
operation  
Manual operation  
Operating fault  
) Select position M for sequential  
changing of the four gears.  
) Push the lever towards the + sign to  
change up a gear.  
) Pull the lever towards the - sign to  
change down a gear.  
This symbol is displayed if a  
When the ignition is on, the  
gear is not engaged correctly  
(selector between two posi-  
tions).  
lighting of this warning lamp,  
accompanied by an audible  
signal and a message in the  
multifunction screen, indicates a gear-  
box fault.  
In this case, the gearbox switches to  
back-up mode and is locked in 3rd gear.  
You may feel a substantial knock when  
changing from P to R and from N to R.  
This will not cause any damage to the  
gearbox.  
It is only possible to change from one  
gear to another if the vehicle speed and  
engine speed permit; otherwise, the  
gearbox will operate temporarily in au-  
tomatic mode.  
Stopping the vehicle  
Before switching off the engine, you  
can engage position P or N to place the  
gearbox in neutral.  
In both cases, apply the parking brake  
to immobilise the vehicle.  
Do not exceed 60 mph (100 km/h), local  
speed restrictions permitting.  
Contact a PEUGEOT dealer or a quali-  
D disappears and the gears  
engaged appear in succes-  
sion on the instrument panel.  
ed workshop as soon as possible.  
If the engine speed is too low  
or too high, the gear selected  
ashes for a few seconds, then the ac-  
tual gear engaged is displayed.  
It is possible to change from position D  
(automatic) to position M (manual) at  
any time.  
When the vehicle is stationary or mov-  
ing very slowly, the gearbox selects  
gear M1 automatically.  
The sport and snow programmes do not  
operate in manual mode.  
If the lever is not in position P,  
There is a risk of damage to the  
i
!
when the driver's door is opened  
gearbox:  
or approximately 45 seconds after  
the ignition is switched off, a mes-  
sage appears in the multifunction  
screen.  
) Return the lever to position P;  
the message disappears.  
-
-
if you press the accelerator and  
brake pedals at the same time,  
if you force the movement of  
the gear lever from the P po-  
sition to another position when  
the battery is at.  
To reduce fuel consumption when  
at a prolonged standstill with the  
engine running (trafc jam...), put  
the gear lever in the N position and  
apply the parking brake.  
116  
DRIVING  
7
SPEED LIMITER  
Steering mounted controls  
Displays in the instrument panel  
System which prevents the vehicle from  
exceeding the speed programmed by  
the driver.  
When the programmed speed limit is  
reached, pressing the accelerator pedal  
no longer has any effect.  
The speed limiter is switched on man-  
ually: it requires a programmed speed  
of at least 20 mph (30 km/h).  
The speed limiter is switched off by  
manual operation of the control.  
The programmed speed can be ex-  
ceeded temporarily by pressing the ac-  
celerator rmly.  
To return to the programmed speed,  
simply slow down to a speed below the  
programmed speed.  
The controls of this system are grouped The programmed information is grouped  
together in the instrument panel screen.  
5. Speed limiter on/off indication  
together on stalk A.  
1. Speed limiter mode selection dial  
The programmed speed remains in the 2. Value decrease button  
memory when the ignition is switched off.  
6. Speed limiter mode selection indica-  
tion  
7. Programmed speed value  
3. Value increase button  
4. Speed limiter on/off button  
The speed limiter cannot, in any cir-  
i
cumstances, replace the need to re-  
spect speed limits, nor can it replace  
the need for vigilance and responsi-  
bility on the part of the driver.  
117  
7
DRIVING  
Programming  
Operating fault  
) Turn dial 1 to the "LIMIT" position:  
the speed limiter mode is selected  
but is not switched on (OFF).  
In the event of a speed limiter mal-  
function, the speed is cleared result-  
ing in ashing of the dashes. Contact a  
PEUGEOT dealer or a qualied work-  
shop to have the system checked.  
You do not have to switch the  
speed limiter on in order to set the  
speed.  
) Set the speed value by pressing button 2 or 3 (e.g.:  
70 mph (110 km/h).  
You can then change the programmed speed using buttons 2  
and 3:  
-
-
-
by + or - 1 mph (km/h) = short press,  
by + or - 5 mph (km/h) = long press,  
in steps of + or - 5 mph (km/h) = maintained press.  
) Switch the speed limiter on by pressing button 4.  
) Switch the speed limiter off by pressing button 4: the dis-  
play conrms that it has been switched off (OFF).  
) Switch the speed limiter back on by pressing button 4  
again.  
Exceeding the programmed speed  
Pressing the accelerator pedal to exceed the programmed  
speed will not have any effect unless you press the pedal  
rmly past the point of resistance.  
The speed limiter is deactivated temporarily and the pro-  
grammed speed, which is still displayed, ashes.  
Returning to the programmed speed, by means of intention-  
al or unintentional deceleration of the vehicle, automatically  
cancels the ashing of the programmed speed.  
On a steep descent, the speed lim-  
!
iter will not be able to prevent the  
vehicle from exceeding the pro-  
grammed speed.  
To avoid any risk of jamming of the  
pedals:  
-
ensure that the mat is posi-  
tioned correctly,  
do not t one mat on top of an-  
Return to normal driving  
-
) Turn dial 1 to the "0" position: the speed limiter mode is  
deselected. The display returns to the distance recorder.  
other.  
118