Access -> Alarm for Your Peugeot 208 4 Door First Generation (2012-2019)

Access  
In the event of a fault with the central  
locking system, it is essential to  
disconnect the battery to lock the boot and  
so ensure complete locking of the vehicle.  
Self-protection function: the system  
checks for the putting out of service of its  
own components. The alarm is triggered  
if the battery, button or siren wiring is  
disconnected or damaged.  
If an opening (door, boot, bonnet, etc.)  
is incorrectly closed, the vehicle is  
not locked, but the exterior perimeter  
monitoring will be activated after  
45 seconds, at the same time as the  
interior volumetric monitoring.  
2
Alarm  
Deactivation  
For all work on the alarm system, contact  
a PEUGEOT dealer or a qualified  
workshop.  
F
Press the remote control  
unlocking button.  
Locking the vehicle with full  
alarm system  
Activation  
The monitoring system is  
deactivated: the indicator lamp in  
the button goes off and the direction  
indicators flash for about 2 seconds.  
F
Turn the ignition off and exit the vehicle.  
System which protects and provides a deterrent  
against theft and break-ins. It provides the  
following types of monitoring:  
F
Lock or deadlock the vehicle  
using the remote control.  
If the vehicle automatically locks itself  
again (as happens if a door or the boot  
is not opened within 30 seconds of  
unlocking), the monitoring system is  
automatically reactivated.  
-
Exterior perimeter:  
The system checks whether the vehicle is  
opened. The alarm is triggered if anyone  
tries to open a door, the boot or the bonnet.  
Interior volumetric:  
The system checks for any variation in the  
volume in the passenger compartment.  
The alarm is triggered if anyone breaks  
a window, enters the passenger  
When the monitoring system is active, the  
indicator lamp in the button flashes once per  
second and the direction indicators come on for  
about 2 seconds.  
-
Triggering of the alarm  
This is indicated by sounding of the siren  
and flashing of the direction indicators for  
30 seconds.  
The exterior perimeter monitoring is activated  
after 5 seconds and the interior volumetric  
monitoring after 45 seconds.  
compartment or moves inside the vehicle.  
The monitoring functions remain active until  
the alarm has been triggered ten times in  
succession.  
33